Bedienungsanleitung Remeha Gas 3002 (Seite 28 von 36) (Holländisch)

8435

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Remeha Gas 3002

11. COMMISSIONING

11.1 Technical data

Control box: Remeha mbc 3.0

Mains voltage: 230V - 50Hz

Minimum ionization current: 1.0 µA DC

Reaction time of ﬂ ame protection: 1 sec.

Safety time: 3 sec.

Max. allowable ambient temperature: 60°C

Number of start attempts: 5

Cut-out differential pressure: 50 Pa.

The control box is sensitive to phase/neutral!

The control panel comes with an alphanumeric LCD-

display. The entire starting cycle can be followed on this

display. Using the code connector (boiler recognition con-

nector) the control unit automatically recognizes the boi-

ler type. During initial commissioning the control unit will

indicate that it recognizes the boiler type code (if not: see

para. 12). Still, it will ask you to check the type indicated

on the sticker placed on the boiler (next to the boiler data

batch, behind the front panel casing).

See also point 8, para. 11.2.

Attention:

If the boiler takes ist combustion air from the boiler room

and is commissioned before building works are com-

pleted on the site, particular care must be taken to avoid

dust and dirt particles from the site being drawn into

the boiler house and into the boiler during operation.

Special inlet ﬁ lters are available for use on the boiler if

the need arises (please contact our technical department

for further information on their use).

11.2 Initial lighting

1. Check the gas connections.

2 Check the electrical connections, phase-neutral-earth

and all earth wires.

3. Check the water level.

4. Check the presetting of the N- and V- controllers

(see ﬁ g. 21 for 7 and 9 sections, and ﬁ g. 22 for

11 to 19 sections):

5. Switch on the circulation pump and check assembly

position and direction of rotation.

6. Switch on the power supply to the boiler.

7. Activate the main switch on the instrument panel.

Fig. 18 Boiler type label

8. Only at initial commissioning:

Select the language in which the texts should appear

on the display using the ' '- and ' ' buttons and

conﬁ rm the selection with the ' ' button.

Check the boiler type. Spread over a number of me-

nus, the boiler type speciﬁ cations will appear on the

display of the control unit. Compare these with the

speciﬁ cations on the boiler type label (next to the boi-

ler data batch, behind the front casing, ﬁ gure 18).

By always conﬁ rming the correctness of the speciﬁ ca-

tions mentioned in a speciﬁ c menu with the ' ' but-

ton, you will travel down the menus until you get to the

main menu (see para. 7.3).

Warning: If the parameters are not entered cor-

rectly at this initial stage, the main PC board will

have to be changed.

9. Select the service level by travelling down the

user menus using the ' ' button. Enter code 00 12

using the ' '- and ' ' buttons and conﬁ rm it with the

' ' button.

10. Now select the option 'Service tests' with the ' ' but

ton and conﬁ rm it with the ' ' button.

The cursor now can be placed on the following

options: 1.) Boiler on?

2.) Fan on?

3.) Ignition on?

Set the cursor on 'Ignition on?' and conﬁ rm with the

' '-button.

The boiler will now simulate a start, with closed gas

valve.

Check the ignition by looking through the looking glas

in the end sections of the boiler.

If you don't see the sparks clearly, check the position

of the ignition electrode.

Controllers Presetting

1,0

NOTE:

Work only to be carried out by a competent Engineer,

with the relevant certiﬁ cation ie: CORGI, ACOPS, IEE

regs. etc. On completion a copy of the commissioning sheet

should be returned to Broag Ltd for record purposes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Remeha Gas 3002 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Remeha Gas 3002

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info