805744
27
Zoom out
Zoom in
Vorherige Seite
1/72
Nächste Seite
Settings to be made for this type of installation
Parameters Access Settings to be made See chapter
INSTALLATION Installer level
Menu #SYSTEM
EXTENDED ¼ "Displaying the parameters
in extended mode", page 38
MAX. CIRC. B Installer level
Menu #SECONDARY
LIMITS
Set the value of MAX.
CIRC. B to the
temperature
corresponding to the
needs of the exchanger
¼ "Professional settings",
page 46
CIRC. B:(1) Installer level
Menu #SYSTEM
SWIM.P. ¼ "Setting the parameters
specific to the installation", page
38
If a heating shutdown command
is connected to the 0-10V inlet
on the terminal block:
IN 0-10V
Installer level
Menu #SYSTEM
NO
If a heating shutdown command
is connected to the 0-10V inlet
on the terminal block:
I.TEL:(2)
Installer level
Menu #SYSTEM
0/1 B
(1) The parameter is only displayed if INSTALLATION parameter is set to EXTENDED.
(2) The parameter is only displayed if the parameter IN 0-10V is set to OFF.
nControlling the pool circuit
The control system can be used to manage a swimming pool circuit
in both cases:
Case 1: The control system regulates the primary circuit (boiler/
exchanger) and the secondary circuit (exchanger/pool).
4Connect the primary circuit pump (boiler/exchanger) to the
pump B outlet. The temperature MAX. CIRC. B is then guaranteed
during comfort periods on programme B in summer and winter
alike.
4Connect the pool sensor (package AD212) to the S OUTL B input.
4Set the set point of the pool sensor using key C in the range 5 -
39°C.
Case 2: The pool has already a regulation system that is to be
kept. The control system only regulates the primary circuit
(boiler/exchanger).
4Connect the primary circuit pump (boiler/exchanger) to the
pump B outlet.
The temperature MAX. CIRC. B is then guaranteed during comfort
periods on programme B in summer and winter alike.
The swimming pool can also be connected to circuit C by
adding the AD249 option:
4Make the connection to the terminal blocks marked
C.
4Set the parameters for circuit C.
iSense Pro DIN - AD280 4. Installation
22/11/2012 - 300025649-001-01 26
27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Remeha iSense Pro wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Remeha iSense Pro

Remeha iSense Pro Installationsanweisung - Deutsch - 80 seiten

Remeha iSense Pro Bedienungsanleitung - Deutsch - 36 seiten

Remeha iSense Pro Installationsanweisung - Holländisch - 18 seiten

Remeha iSense Pro Bedienungsanleitung - Holländisch - 18 seiten

Remeha iSense Pro Installationsanweisung - Französisch - 16 seiten

Remeha iSense Pro Bedienungsanleitung - Französisch - 16 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info