443978
13
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
4. Go to the time you want to set. Press button C to confirm
You can use the Remove button to remove the selected
switch time.
5. Use button C to set the time and the corresponding desired
temperature.
6. Once you have set all switch times for a particular day, you can
copy the settings for that day to other days:
- Go to the day.
- Press Copy
- Use button C to select the day(s) you want to copy the settings
to, and press Save
7. Go to the day. Then press button C.
8. Go to step 3 to set the next day. Or press Back to close this menu.
Changing an existing clock program
1. Select in the controller: Menu > Program > Clock prog. >
Change.
2. Go to the day you want to change the clock program for. Press
button C to confirm.
3. Go to the time you want to change. Press button C to confirm.
You can use the Remove button to remove the selected
switch time.
4. Use button C to set the time and the corresponding desired
temperature.
5. Once you have set all switch times for a particular day, you can
copy the settings for that day to other days:
- Go to the day.
- Press Copy
- Use button C to select the day(s) you want to copy the settings
to, and press Save
6. Go to the day. Then press button C.
7. Go to step 2 to set the next day. Or press Back to close this menu.
Restoring the default settings
Proceed as follows to restore the settings for the default clock
program:
Menu > Program > Clock prog. > Factory program.
4.1.2. Setting continuous temperatures
Instead of the clock program, you can also set the room temperature
continuously to a particular value. You can set three different
continuous temperatures via: Menu > Program
4 Day temp.: room temperature during the day, corresponding to
the: Continuous day program.
4 Night temp.: Room temperature at night, corresponding to the:
Continuous night program.
4 Frost temp.: Room temperature to protect the room where the
controller is installed from freezing. This setting comes under the
program: Frost. For further information ¼ "Frost protection -
System", page 21.
iSense
4. Setting
030211 - 120666-AG
12
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

remeha-isense

Suche zurücksetzen

  • im Dysplay ersacheint nur Error, sonst kein Fehlercode, ws kann das sein ?
    Eingereicht am 27-10-2021 20:09

    Antworten Frage melden
  • Wie sind die Schritte für das programmieren für Automatik betrieb Eingereicht am 21-2-2019 11:39

    Antworten Frage melden
  • Was bedeutet Fehlermeldung F203 ? Kommunikationsfehler. Überprüfen sie die Verbindung.
    Was kann ich machen?? Eingereicht am 14-2-2018 17:07

    Antworten Frage melden
  • Warum kommt die Bedienungsanleitung immer auf holländisch und nicht auf Deutsch, obwohl ich die Sprache Deutsch angeklickt habe Eingereicht am 22-8-2017 18:10

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Remeha iSense wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Remeha iSense

Remeha iSense Installationsanweisung - Deutsch - 40 seiten

Remeha iSense Bedienungsanleitung - Deutsch - 168 seiten

Remeha iSense Bedienungsanleitung - Englisch - 39 seiten

Remeha iSense Bedienungsanleitung - Englisch - 168 seiten

Remeha iSense Installationsanweisung - Holländisch - 40 seiten

Remeha iSense Bedienungsanleitung - Holländisch - 168 seiten

Remeha iSense Bedienungsanleitung - Holländisch - 40 seiten

Remeha iSense Installationsanweisung - Französisch - 40 seiten

Remeha iSense Bedienungsanleitung - Französisch - 168 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info