805748
36
Zoom out
Zoom in
Vorherige Seite
1/76
Nächste Seite
Tab.27 Adjustment for BREEAM with gas type G20 (H gas)
Code Description Display text Range 135 160
DP003 Abs. max fan DHW Maximum fan speed on Domestic Hot Wa
ter
1000 - 8500 Rpm 5900 7000
GP007 Fan RPM Max CH Maximum fan speed during Central Heat
ing mode
1000 - 8500 Rpm 5900 7000
GP008 Fan RPM Min Minimum fan speed during Central Heating
+ Domestic Hot Water mode
900 - 8500 Rpm 1900 1900
GP009 Fan RPM Start Fan speed at appliance start 900 - 5000 Rpm 2200 2200
Tab.28 Adjustment for gas type G30/G31 (butane/propane)
Code Display text Description Range 135 160
DP003 Abs. max fan DHW Maximum fan speed on Domestic Hot Wa
ter
1000 - 8500 Rpm 5450 6400
GP007 Fan RPM Max CH Maximum fan speed during Central Heat
ing mode
1000 - 8500 Rpm 5450 6400
GP008 Fan RPM Min Minimum fan speed during Central Heating
+ Domestic Hot Water mode
900 - 8500 Rpm 2150 2150
GP009 Fan RPM Start Fan speed at appliance start 900 - 5000 Rpm 3000 3000
Tab.29 Adjustment for BREEAM with gas type G30/G31 (butane/propane)
Code Display text Description Range 135 160
DP003 Abs. max fan DHW Maximum fan speed on Domestic Hot Wa
ter
1000 - 8500 Rpm 5800 6850
GP007 Fan RPM Max CH Maximum fan speed during Central Heat
ing mode
1000 - 8500 Rpm 5800 6850
GP008 Fan RPM Min Minimum fan speed during Central Heating
+ Domestic Hot Water mode
900 - 8500 Rpm 2150 2150
GP009 Fan RPM Start Fan speed at appliance start 900 - 5000 Rpm 3000 3000
3. Check the setting of the gas/air ratio.
Important
Make sure to apply the O2 values specified for BREEAM.
7.2.2 Checking/setting combustion
1. Unscrew the cap from the flue gas measuring point.
2. Insert the probe for the flue gas analyser into the measurement
opening.
Warning
During measurement, seal the opening around the sensor fully.
Important
The flue gas analyser must have a minimum accuracy of ±0.25%
O2.
Important
The flue gas analyser must meet the requirements of BS 7927 or
BS-EN 503793 and be calibrated according to the manufacturer's
requirements.
Fig.45 Flue gas measuring point
AD-0000222-01
7 Commissioning
36 7701838 - v.09 - 10122021
36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Remeha Quinta Ace 135 - T Control wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info