510214
7
Zoom out
Zoom in
Vorherige Seite
1/127
Nächste Seite
5
ENGLISH
GBDNLFEIDKSFINPSKCZ
HUN
PL
RUTRROGRSLAE
HR/
SRB
GB
Cleaning should only be done with a soft brush, such as the brush supplied with the
product.
Only use the light-grade oil supplied or sewing machine oil on the blades.
Do not use harsh or corrosive cleaners on the units or their cutters.
Do not apply pressure or hard objects to cutters.
Do not disassemble cutter assembly.
Do not submerge in water as damage will occur.
STORAGE
Always store this appliance and cord in a moisture-free area. Do not store it in
temperatures exceeding 14F (60°C).
Do not wrap the cord of the charging adaptor around the appliance.
IMPORTANT SAFETY INSTRUCTIONS
WARNING – TO REDUCE THE RISK OF BURNS, ELECTROCUTION, FIRE, OR
INJURY TO PERSONS:
An appliance should never be left unattended when plugged in to a power outlet.
Keep the power plug and cord away from heated surfaces.
Make sure the power plug and cord do not get wet.
Do not unplug the product with wet hands.
Do not use the product with a damaged cord. A replacement can be obtained via
our International Service Centres listed at the back of this booklet.
Use and store the product at a temperature between 15°C and 35°C.
Always unplug from the mains when cleaning or when being used under running
water.
Only use the parts supplied with the appliance.
This product is for cordless use only. Do not use your Trimmer while it is plugged
into the mains.
Keep this product out of reach of children. The use of this appliance by persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge can
give cause to hazards. Persons responsible for their safety should give explicit instructions
or supervise the use of the appliance.
PROTECT THE ENVIRONMENT
The product contains a Nickel Metal Hydride cell unit. Do not dispose the trimmer in
household waste at the end of its useful life. Disposal can take place at our service centres
or appropriate collection sites.
CAUTION: Do not put in fire or mutilate your battery packs as they may burst or release
toxic materials.
080706_REM_IFU_BHT2000_22L.indd GB5080706_REM_IFU_BHT2000_22L.indd GB5 05.11.2008 12:21:48 Uhr05.11.2008 12:21:48 Uhr
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

remington-bht2000

Suche zurücksetzen

  • Wie wechsle ich den scherkopf beim Remington bht 2000a Eingereicht am 27-7-2019 12:05

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Remington BHT2000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info