Bedienungsanleitung Remington IPL6780 (Seite 9 von 196) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch, Alle Sprachen)

719939

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

ENGLISH

• Allow the system to cool down for 5 minutes before attempting to change attachments.

• Turn the Power Switch OFF and unplug the Power Cord from the electrical outlet.

• Hold the attachment with one hand while pressing both Attachment Release Buttons with the other hand and pull

gently (Fig. 10).

• Gently push the other attachment back into the Hand Piece making sure both side tabs click into place.

• NOTE: the longer tab (with gold circuits) must be on top to properly t.

• Store the unused attachment in a safe location (such as in the packaging) taking care not to damage the Flash

Window and other components.

• The i-LIGHT is equipped with two operating modes: Single Flash Mode and Multi-Flash Mode. Your i-LIGHT device

will automatically be set to Single Flash Mode each time the device is powered ON.

• Single Flash Mode: The i-LIGHT will ash each time the Flash Button is pressed. This mode is ideal for precision treat-

ments of the face and small areas.

• Multi-Flash Mode: The i-LIGHT device will ash when the Flash Button is pressed and will continue to ash every 3

seconds when the skin contact sensors are fully engaged. The Multi-Flash mode allows you to quickly treat large

areas by simply gliding the hand piece over the skin after each ash.

How to treat:

• Place the Flash Window rmly against the skin - ensure the Skin Contact Sensors are fully engaged.

• NOTE: When the Skin Contact Sensors are fully engaged you will hear a ‘chirp’ and the Bulb Status Indicator Display

will illuminate green.

• Press the ash button to deliver a ash. You should expect to see a bright ash of light (similar to a camera ash) and

you should feel a mild sensation of warmth.

• Move to the next area and treat in a grid like pattern to ensure full coverage of the treatment area.

• For Single-Flash Mode, press the Flash Button each time you move to the next area.

• For Multi-Flash Mode, keep your nger on the Flash Button to keep it depressed and glide to the next area being

sure to keep the Skin Contact Sensors fully engaged. The next ash will be delivered automatically after 3 seconds.

• NOTE: During Multi-Flash Mode if you let go of the Flash Button or lose skin contact, simply resume treatment by

repeating the above steps.

Facial Treatment (female use only)

• Facial hair can be very dierent to body hair and the skin on the face tends to be sensitive and more likely to be

exposed to the sun’s UV rays; therefore treating unwanted facial hair is dierent to treating the body – please be sure

to read the Warnings and Safety Precautions carefully before beginning a facial treatment.

• IMPORTANT: The Facial Attachment has been specially designed to treat the unique characteristics of female facial

hair. DO NOT use the Body Attachment on the face. See section ‘Changing Attachments’ for more information.

• The Facial Attachment is only intended for use on female facial hair below the cheekbone (Fig. 2).

• DO NOT use on male beards or facial hair as the results may be permanent or uneven which may produce changes in

facial hair characteristics which may not be desirable.

TREATMENT TIPS

Body Treatment

• For best results, avoid overlapping ashes. This helps prevent exposure to more energy than is necessary to suppress

hair growth. It also ensures that you get the maximum use of the Bulb.

• For the most eective results, always use the highest intensity operating mode that does not cause discomfort on

the skin. The level you use should feel warm on your skin, but should never cause discomfort.

• You may notice that bony areas, such as elbows, shins and ankles, are more sensitive during treatment. This is normal

and should not be cause for alarm. To avoid this sensitivity, try stretching the skin away from the bony area during

treatment.

Facial Treatment

• Test on a Patch of Skin – since facial skin tends to be more sensitive, make sure you test on a small patch before

proceeding. See section ‘Test the i-LIGHT on your skin’ for more details.

• Use a Mirror to Guide your Treatments – using a mirror for a good view of the area to be treated and to help ensure

you avoid treating the lips or any other dark spots. If the reected light is unpleasant, you may want to close your

eyes before each ash.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Remington IPL6780 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info