Bedienungsanleitung REMKO BL261 (Seite 4 von 32) (Englisch)

587582

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Safety notes

Disposing of the units and

their components

Only recyclable materials are used

in the manufacture of the units

and components.

Help protect the environment

by ensuring that the units or

components (for example

batteries) are not disposed of

in household waste, but only in

accordance with local regulations

and in an environmentally safe

manner, e.g. using authorised

disposal and recycling

specialists or council

collection points.

Intended use

Depending on the model, the

units and the additional fittings

with which they are equipped are

only intended for private use as

an air-conditioner for the purpose

of cooling or heating the air in an

enclosed space.

Any different or additional use shall

be classed as non-intended use.

The manufacturer/supplier assumes

no liability for damages arising from

such use. The user bears the sole

risk in such cases.

Intended use also includes

working in accordance with the

operating manual and installation

instructions and complying with the

maintenance requirements.

Carefully read this operating

manual before starting the unit

for the first time. It contains

useful tips and notes as well as

hazard warnings to prevent injury

or material damage

. Failure

to follow the directions in this

manual not only presents a danger

to people, the environment and

the system itself, but will void any

claims for liability.

■ Keep this operating manual and

the refrigerant data sheet near

to the unit.

■ The units and components

should be set up and installed

only by qualified personnel.

■ The set-up, connection,

and operation of the unit and its

components must take place in

accordance with the operating

conditions stipulated in this

manual and comply with all

applicable local regulations.

■ Mobile units must be set up

securely on suitable surfaces and

in an upright position. Stationary

units must be permanently

installed for operation.

■ Modification of units and

components supplied by

REMKO is not permitted and

can cause malfunctions.

■ Units and components may

not be operated in areas where

there is an increased risk of

damage. Observe the minimum

clearances.

■ The electrical supply is to be

adapted to the requirements

of the units.

■ The operational safety of

the units and components

is only assured if they are

fully assembled and used as

intended. Safety devices may

not be modified or bypassed.

■ Do not operate units or

components with obvious

defects or signs of damage.

■ All housing parts and openings

in the unit, e.g. air intakes and

outlets, must be free of foreign

objects, fluids, or gases.

■ The units and components must

be kept at an adequate distance

from flammable, explosive,

combustible, abrasive and dirty

areas or atmospheres.

■ Contact with some parts of the

unit or components can result in

burns or other injuries.

■ Installation, repair and

maintenance work may be

carried out by authorised

specialists only. Visual

inspections and cleaning can

be performed by the operator as

long as power is disconnected

from the equipment.

■ To preclude any danger from the

unit, take appropriate hazard-

prevention measures when

performing installation, repair or

maintenance work or cleaning

the unit.

■ The units and components

should not be exposed to any

mechanical load, extreme levels

of humidity or direct exposure

to sunlight.

Warranty

In order to make warranty claims, it

is essential that the ordering party

or their representative complete

and return the "certificate of

warranty" to REMKO GmbH

& Co. KG at the time when the

equipment is purchased and

commissioned.

The warranty conditions are

detailed in the "General business

and delivery conditions".

Furthermore, only the parties to

a contract can conclude special

agreements beyond these

conditions. In this case, first contact

your contractual partner.

Disposing of packaging

All products are carefully packaged

using environmentally friendly

materials prior to transportation.

You can make a valuable

contribution to reducing waste

and sustaining raw materials by

only disposing of packaging at

approved collection points.

Environmental

protection

and recycling

REMKO BL

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

REMKO BL261 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von REMKO BL261

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info