Bedienungsanleitung REMKO ELT 10-6 (Seite 4 von 16) (Englisch)

587892

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

REMKO ELT series

Safety notes Unit description

The units are portable electric

heating units for industrial

applications.

The units are operated exclusively

with electric power and have been

designed in such a way that they

can be used fully automatically,

universally and in a straightforward

manner.

The units are equipped with

specially enclosed electric heating

resistors, low noise and low-

maintenance axial fans, safety and

aftercooler thermostats, a room

thermostat socket and power cable

with protective contact plug.

The units conform to the

fundamental health and safety

requirements of the appropriate

EU stipulations.

The units are dependable and offer

ease of operation.

The units may be used among

other things for the following:

■

Drying newly completed

buildings

■

Spot heating outdoor

workspaces or ﬁre-proof

manufacturing facilities and

halls

■

Continuous or temporary room

heating

■

De-icing machines, vehicles and

non-combustible warehoused

goods while adhering to the

relevant safety distances

Always observe the respective local building code and ﬁre prevention

guidelines as well as the guidelines of the accident prevention and

insurance associations when using the units.

The units have been subjected

to extensive material, functional

and quality inspections prior to

delivery. However, dangers can

arise from the units if they are used

improperly or not as intended by

untrained personnel!

Please observe the following notes:

■

The personnel tasked with

operating the units must check

the units for visible defects on

the operating and safety devices

as well as the presence and

function of the protective devices

prior to starting work

Inform the supervisor if defects

are discovered!

■

In the event of defects that

endanger the operational safety

of the unit, operation must be

discontinued immediately

■

Observe the respective local

regulations and the relevant

electrical safety measures when

using the units

■

Maintain safety distances to

combustible materials

■

An unobstructed air inlet and air

outlet must be guaranteed at all

times

■

The air outlet must not be

constricted or equipped with

pipe or hose lines

■

Never insert foreign objects into

the units

■

The units must not be covered

during operation

■

Safety devices must not be

bypassed or disabled

■

The units must not be operated

in the vicinity of bathtubs,

showers, swimming pools etc.

■

The units must not be operated

directly below a wall socket

■

The units must not be exposed

to direct jets of water

e.g. pressure washers etc.

■

Never allow water to enter the

units

■

The units must not be installed

or operated in potentially

ﬂammable or explosive

environments

■

The units must not be installed

or operated in atmospheres

containing oil, sulphur or salt

■

All electrical cables for the

units must be protected against

damage, even damage caused

by animals

■

The units must be set up in

a stable, horizontal position

Safety devices must not be

bypassed or disabled.

CAUTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

REMKO ELT 10-6 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von REMKO ELT 10-6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info