587878
13
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
13
Troubleshooting
The units are manufactured
using state-of-the-art production
methods and tested several times
to verify their correct function.
However, if a functional fault
should occur, the unit should first
be checked in accordance with the
following list.
The unit does not start:
Check for any timer
programming
Indicator light [] illuminated?
Check the power supply and
the power fuse provided by the
customer 230V/1~/50 Hz
Check the power plug and the
cable for damage
Check the condensate tank’s fill
level and seating
The [] “Container full”
indicator light must not flash!
Check that the microswitch
[MS] on the condensate
container is functioning
Check that the inlet and outlet
are free
Overheating!
Check the fuse on the control
board
This work requires the unit to
be opened and must therefore
only be carried out by an
authorised specialist company!
5. Clean the air filter [F] with a soft
brush or a vacuum cleaner.
6. Heavier contamination may be
remedied by washing the filter
[F] in a lukewarm (max. 40 °C)
soap solution.
Finally, always rinse the filter
carefully with clear water and
allow to dry!
7. Also check the intake grill [G]
for contamination and clean the
openings if necessary.
8. Before refitting the intake
grill [G] and the air filter [F],
ensure that they are completely
dry and undamaged.
NOTE
Heavily contaminated or
damaged air filters must be
replaced with new parts.
Only original spare parts may
be used.
NOTE
Repair work may only be
carried out by authorised and
qualified technicians.
s
s
s
Filter cleaning
To prevent damage to the unit, it is
equipped with an intake grill with
integrated air filter.
In order to prevent power losses
or unit faults, the intake grill
with filter must be inspected as
required, but every 2 weeks at the
latest, and cleaned if necessary.
1. Use the control panel ([] key)
to switch the unit off.
2. Remove the power plug from
the mains socket.
3. Remove the condensate
container [K].
4. Pull the filter [F] that is behind
the intake grill downwards and
out.
The units are not permitted to
be operated without the intake
grill and air filter fitted!
CAUTION
!
K
F
G
F
F
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für REMKO ETF360 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von REMKO ETF360

REMKO ETF360 Bedienungsanleitung - Deutsch - 20 seiten

REMKO ETF360 Bedienungsanleitung - Holländisch - 20 seiten

REMKO ETF360 Bedienungsanleitung - Französisch - 20 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info