Bedienungsanleitung REMKO GPM 15 (Seite 4 von 44) (Englisch)

587905

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

REMKO GPM

Safety information

The units were subjected to

extensive material, function and

quality inspections and tests prior

to delivery. However, the units

may constitute a hazard if used by

untrained personnel, improperly or

not for the intended purpose.

The following information must be

observed:

■

The units must only be

operated by persons who have

been instructed in the operation

of the units

■

In the event of faults that affect

safe operation of the units, they

must be switched off

■

The units must be installed and

operated so that the discharging

hot air has no damaging

effects on the environment or

equipment

■

Do not expose the units to the

effects of weather (rain, sun,

etc.)

■

Do not touch the units with

moist or wet parts of the body,

e.g. hands

■

Protect the units from splashing

water or other liquids

■

Do not use gas pipes for

grounding electrical equipment

■

Do not touch hot parts of the

units such as the chimney pipe

■

Do not moving parts of the units

The units must always be operated in compliance with the applicable

local building and ﬁre protection regulations and regulations of the

employers‘ liability insurance associations.

■

Never insert foreign objects in

the units

■

The units must only be mounted

on constructions or ceilings

of flame retardant materials

designed to take the weight

■

The units must only be fastened

at the points provided at the

factory

■

The units must not be installed

and operated in locations

exposed to fire hazards

and potentially explosive

atmospheres

■

The units must be installed

outside traffic zones, e.g. of

cranes. A protective zone of 1 m

distance must be maintained

■

The air inlets including grilles

must be kept free of dirt and

loose objects at all times

■

The units must not be exposed

to a direct jet of water

■

The units must be tested at least

once a year by a specialist

■

Safety devices must not be

overridden or blocked!

■

Before carrying out

maintenance or repairs, the gas

supply must be shut-off and the

unit disconnected in all poles

from the mains supply.

(Unscrew fuse or switch off

local main/emergency switch)

Precautions if there is a smell

of gas

1. Immediately switch off the unit.

2. Close the gas shut-off valve(s).

3. Warn all persons potentially at

risk.

4. Open windows and doors.

5. Do not operate electrical

devices such as light switches or

electrical plug contacts.

6. If the room in which there is a

smell of gas cannot be entered,

immediately call the ﬁre brigade,

police and if necessary the

responsible gas supply company.

The units are intended

exclusively for industrial and

commercial use. They are not

intended for domestic heating

or similar.

NOTE

ATTENTION

Installation, adjustments and

maintenance must only be

carried out by authorised

specialists.

The safety devices must not be

overridden or blocked during

operation.

ATTENTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

REMKO GPM 15 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von REMKO GPM 15

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info