Bedienungsanleitung REMKO LRM350 (Seite 5 von 24) (Englisch)

794470

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

1.6 Safety instructions for the

operator

The operational safety of the units and compo-

nents is only assured providing they are used as

intended and in a fully assembled state.

This unit can be used by children above the age of

8, as well as by people with impaired physical,

sensory or mental capabilities or a lack of experi-

ence and knowledge if they are supervised or have

received instruction in the safe operation of the

unit, and if they understand the associated poten-

tial hazards. Children must never play with the unit.

Cleaning and user maintenance must not be car-

ried out by unsupervised children.

nThe units and components may only be set up,

installed and maintained by qualified per-

sonnel.

nIf the mains power supply line of this unit is

damaged, this must be replaced by the manu-

facturer or their customer services department

or a similarly qualified person in order to avoid

any hazard.

nDo not operate units or components with

obvious defects or signs of damage.

nThe units may not be installed or operated in

explosive environments.

nThe units must not be installed or operated in

atmospheres containing oil, sulphur, chlorine or

salt.

nThe units must be installed upright and in a

stable position.

nThe units and components must not be

exposed to any mechanical load, extreme

levels of humidity or extreme temperatures.

nAll housing parts and unit openings, e.g. air

inlets and outlets, must be free from foreign

objects. An unobstructed air inlet and air outlet

must be guaranteed at all times.

nThe units must not be covered during opera-

tion.

nNever insert foreign objects into the units.

nThe units must not be transported while they

are running.

NOTICE!

Extensions to the connection cable must only

be conducted by authorised specialist electri-

cians, taking into consideration the unit power

consumption, cable length and local use.

DANGER!

Work on the electrical equipment must only be

conducted by an authorised specialist!

1.7 Safety notes for

installation, maintenance and

inspection work

nAppropriate hazard prevention measures must

be taken to prevent risks to people when per-

forming installation, repair, maintenance or

cleaning work on the units.

nThe setup, connection and operation of the

units and its components must be undertaken

in accordance with the usage and operating

conditions stipulated in this manual and comply

with all applicable regional regulations.

nIf the mains power supply line of this unit is

damaged, this must be replaced by the manu-

facturer or their customer services department

or a similarly qualified person in order to avoid

any hazard.

nThe units must be installed upright and in a

stable position.

nThe units must not be exposed to direct jets of

water, e.g. pressure washers etc.

nSafety devices may not be modified or

bypassed.

nThe units and components may only be set up,

installed and maintained by qualified per-

sonnel.

nDo not operate units or components with

obvious defects or signs of damage.

nThe units may not be installed or operated in

explosive environments.

nThe units must not be installed or operated in

atmospheres containing oil, sulphur, chlorine or

salt.

nThe units and components must not be

exposed to any mechanical load, extreme

levels of humidity or extreme temperatures.

nAll housing parts and unit openings, e.g. air

inlets and outlets, must be free from foreign

objects. An unobstructed air inlet and air outlet

must be guaranteed at all times.

nAll electrical cables on the outside of the units

must be protected against damage (e.g. by ani-

mals etc.).

1.8 Unauthorised modification

and changes

Modifications or changes to units and components

are not permitted and may cause malfunctions.

Safety devices may not be modified or bypassed.

Original replacement parts and accessories

authorised by the manufactured ensure safety. The

use of other parts may invalidate liability for

resulting consequences.

REMKO

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

REMKO LRM350 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von REMKO LRM350

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info