Bedienungsanleitung REMKO MKT250 (Seite 2 von 12) (Englisch)

587553

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

MKT 240

Recessed grip

Control

panel

Infrared

receiver

Transport

rollers

Air directing

plate ﬁ ns

Before delivery, this device was sub-

jected to numerous material, function,

and quality tests. Nevertheless, the

device may present a danger if used by

untrained personnel, improperly, or not

according to regulation!

Observe the following notices:

■

The device is not suited for out-

door operation.

■

The device may not be set up and

operated in rooms at risk of explo-

sion and in atmospheres containing

oil, sulphur, or salt.

■

Make sure it is at a sufﬁ cient

security distance to inﬂ ammable

objects.

■

Do not place any objects on the

device.

■

Observe the minimum clearances

(Fig. 2).

■

Do not insert any objects into air

inlets and outlets.

■

Erect the device on an even, stable

surface. Never place it on its side

(Fig. 3).

■

Operate the device only when it is

upright.

■

Do not expose the device to direct

water spray.

■

Operate the device only within its

permissible operating limits (16 to

35°C).

■

Do not pull on or bend the mains

supply line.

■

Protect all electrical lines of the

device from damage, even from

animals.

■

Select the extension lines of the

mains supply line depending on

the connected load of the device,

the line length, and the intended

use.

■

Do not lay lines under carpeting.

■

Never operate the device with-

out an air ﬁ lter.

■

Never direct the air ﬂ ow at

people.

■

Never open the device housing

as there is a danger of an electri-

cal shock.

■

Work on the cooling system and

the electrical equipment may be

carried out only by an

authorised specialist.

Transporting the device

■

Before transport, switch off the

device and pull the mains plug.

■

Transport the device only in an

upright position.

■

We recommended that any

condensate be drained using the

condensate drain spout on the

back side of the device before

transport.

■

After every transport of the

device, wait at least 5 minutes

before recommissioning it

(Fig. 4).

Safety Notices

Operation other than as de-

scribed in these instructions is

prohibited. Nonobservance leads

to the extinguishment of any li-

ability and warranty claims.

Fig.

Minimum clearances

Side 500 mm

Front 500 mm

Rear 400 mm

Top 100 mm

Scope of Supply

1 MKT 240 air conditioner

1 Infrared remote control

Batteries (type AAA/1.5 V)

Air outlet hose with connection

pipe adapter and

win

dow jet

Exhaust air

outlet

Connecting line

with plug

Condensate drain

spout with plug

Air inlet

(circulation air)

with air ﬁ lter

Window

jet

ir outlet

hose

Air inlet

(exhaust air)

Fig.

MKT 240

Caution

TIP

CAUTION

DANGER

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

REMKO MKT250 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von REMKO MKT250

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info