Bedienungsanleitung REMKO ML 351 (Seite 4 von 28) (Englisch)

587699

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Safety notes

Disposal of packaging

All products are carefully packaged

using environmentally friendly

materials prior to transportation.

Make a valuable contribution to

reducing waste and sustaining

raw materials. Only dispose of

packaging at approved collection

points.

Disposal of

old equipment

Equipment manufacture is subject

to continuous quality control. Only

high-quality materials are used, the

majority of which can be recycled.

Help protect the environment by

only disposing of old equipment in

accordance with local regulations

and in an environmentally safe

manner, e.g. through authorised

disposal and recycling specialists or

at collection points.

Warranty

In order to make warranty claims,

it is essential that the the ordering

party or their representative

complete and return the "certificate

of warranty" and commissioning

report to REMKO GmbH & Co. KG

at the time when the equipment

was purchased and commissioned.

The warranty conditions are

detailed in the "General terms

and conditions“. The contractual

parties can also agree additional

terms beyond the scope of the

above. In this case, first contact the

contractual partner.

Environmental

protection

and recycling

Carefully read this manual before

starting the unit for the first time. It

contains useful tips and notes as

well as hazard warnings to prevent

injury or material damage . Non-

observance of this manual may

endanger persons, the environment

as well as the equipment itself and

will void any claims for liability.

■ Store this manual and the

refrigerant datasheet in the

vicinity of the unit.

■ The unit should only be set

up and installed by qualified

personnel.

■ The setup, connection and

operation of the unit and

its components must be in

accordance with the operating

conditions stipulated in this

manual and comply with all

applicable local regulations.

■ Units designed for mobile use

should be safely set up on a

suitable floor and in a vertical

position. Units designed for

stationary use should only be

operated in their permanently

installed state.

■ It is prohibited to make

modifications or changes to

equipment or components

supplied by REMKO as this may

cause malfunctions.

■ Equipment and components

should not be operated in areas

where there is a heightened

damage risk. Observe the

minimum clearances.

■ The electrical supply should

be adapted to fulfil the

requirements of the unit.

■ The operational safety of

equipment and components is

only assured providing they are

used as intended and in a fully

assembled state. Safety devices

should not be modified or

bypassed.

■ Do not operate equipment

or components with obvious

defects or signs of damage.

■ All housing parts and openings,

e.g. air inlets and outlets, must

not be blocked by foreign items,

fluids or gases.

■ The equipment and components

must be kept a safe distance

from inflammable, explosive,

combustible, agressive and dirty

areas or atmospheres.

■ Persons coming into contact

with equipment parts may suffer

burns or injury.

■ Installation, repair and

maintenance work should only

be carried out by authorised

specialists. Inspection and

cleaning can be performed

by the operator providing the

equipment is not under voltage.

■ Take appropriate hazard

prevention measures when

performing installation, repair or

maintenance work or cleaning

the equipment.

■ The equipment and components

should not be exposed to any

mechanical stresses, extreme

levels of humidity or direct

exposure to sunlight.

REMKO ML

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

REMKO ML 351 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von REMKO ML 351

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info