Bedienungsanleitung REMKO RVS DC serie 50-80-130-180 (Seite 20 von 44) (Englisch)

726821

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Installation materials

The unit is fastened on vibration

dampers (accessories) to the ﬂoor

by means of bolts. The carrying

capacity of the bracket and

the wall must be taken into

account when fastening to

the wall.

Deﬁnition of the Danger Area

Access to the unit is only permitted

for authorised and trained persons.

If unauthorised persons can

approach the danger areas, these

areas must be identiﬁed with

corresponding signs, barriers, etc.

■

The external danger area

surrounds the unit up to

a distance of 2 m, measured

in all directions from

the unit housing.

■

The external danger area on-

site can differ as a result of the

setup. The specialist company

performing the installation work

bears the responsibility for this.

■

The internal danger area is

located inside the machine

and can only be reached with

the use of an appropriate

tool. Access is prohibited for

unauthorised persons!

Installation

NOTE

Installation should only

be performed by authorised

specialists.

Unit installation

1. Install the vibration dampers

(accessories) under the unit

(accessories).

2. Attach the unit to the building

where structurally permitted.

Refer to the Selecting

the installation location

chapter for this.

3. When installing the unit,

ensure that the minimum

clearances described

hereafter are complied with.

Any infringement of these

stipulated clearances can result

in a functional impairment

of the unit operation.

Disassembly of the transport

pallets

The units are supplied with

transport pallets for the purpose

of transportation. Remove these

before installation.

Transport packaging

Transport pallet

4. Ensure that structure-borne

sound is not transferred to parts

of the building.

5. Connect the medium piping.

6. Connect the unit electrically.

NOTE

The electrical connection

of the unit is to be established

by suitable specialist personnel

and in compliance with all

electrical safety regulations.

Compliance with VDE

regulations is essential.

NOTE

The dimensioning of the supply

line and the selection of

the customer-side unit safeguard(s)

is the responsibility of the specialist

company carrying out the work.

The unit manufacturer provides

no information regarding

the dimensioning of pipework

or the selection of fuses/breakers

as these are subject to local

conditions. All of the data required

for the selection can be found

in the technical data for the unit.

NOTE

The selection of the RCD

breaker is the responsibility

of the specialist company

carrying out the work. Based

on theprovisions per VDE 0160,

E VDE 0100 Part 530 as well

as the guidelines of VdS 3501

and the safety regulations from

BGI 608, the use of an AC/

DC-sensitive, type-B RCD

is recommended for ensuring

standards-compliant personnel

and ﬁre protection.

REMKO series RVS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

REMKO RVS DC serie 50-80-130-180 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von REMKO RVS DC serie 50-80-130-180

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info