Bedienungsanleitung REMKO RXT681 DC (Seite 4 von 56) (Englisch)

587835

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Safety notes

Disposing of the units and

their components

Only recyclable materials are used

in the manufacture of the units

and components.

Help protect the environment

by ensuring that the units or

components (for example

batteries) are not disposed of

in household waste, but only in

accordance with local regulations

and in an environmentally safe

manner, e.g. using authorised

disposal and recycling

specialists or council

collection points.

Intended use

Depending on the model, the

units and the additional fittings

with which they are equipped are

only intended to be used as an

air-conditioner for the purpose of

cooling or heating the air in an

enclosed space.

Any different or additional use shall

be classed as non-intended use.

The manufacturer/supplier assumes

no liability for damages arising from

such use. The user bears the sole

risk in such cases.

Intended use also includes

working in accordance with the

operating manual and installation

instructions and complying with the

maintenance requirements.

Carefully read the operating

manual before placing the unit in

service for the first time. It contains

useful tips and notes such as

hazard warnings to prevent injury

and material damage . Failure to

follow the directions in this manual

can result in endangerment to

persons, the environment and the

equipment itself and will void any

claims for liability.

■ Keep this manual and the

refrigerant data sheet near to

the units.

■ The units and components

should be set up and installed

only by qualified personnel.

■ The set-up, connection, and

operation of the unit and

its components must be in

accordance with the operating

conditions stipulated in this

manual and comply with all

applicable local regulations.

■ Mobile units must be set up

securely on suitable surfaces and

in an upright position. Stationary

units must be permanently

installed for operation.

■ Modification of units and

components supplied by

REMKO is not permitted and

can cause malfunctions.

■ Units and components may

not be operated in areas where

there is an increased risk of

damage. Observe the minimum

clearances.

■ The electrical supply is to be

adapted to the requirements of

the units.

■ The operational safety of

the units and components

is only assured if they are

fully assembled and used as

intended. Safety devices may

not be modified or bypassed.

■ Do not operate units or

components with obvious

defects or signs of damage.

■ All housing parts and openings

in the unit, e.g. air intakes and

outlets, must be free of foreign

objects, fluids, or gases.

■ The units and components must

be kept an adequate distance

from flammable, explosive,

combustible, abrasive and dirty

areas or atmospheres.

■ Touching some parts of the

unit can result in burns or other

injuries.

■ Installation, repair and

maintenance work may be

carried out only by authorised

specialists. Visual inspections

and cleaning can be performed

by the operator as long as

power is disconnected from the

equipment.

■ To preclude any danger from the

unit, take appropriate hazard-

prevention measures when

performing installation, repair or

maintenance work or cleaning

the units.

■ The units or components

are not to be exposed to any

mechanical stresses, extreme

levels of humidity or direct

sunlight.

Warranty

The precondition for possible

warranty claims is that the orderer

or his customer has fully filled

out and returned the warranty

document included with the unit to

REMKO GmbH & Co. KG between

the time it was sold and when it

was placed into service.

and placing the unit in service.

The warranty conditions are

listed in the "General terms and

conditions". Furthermore, only

the parties to a contract can strike

special agreements beyond these

conditions. For this reason, please

contact your contract partner in the

first instance.

Disposing of packaging

All products are packed for

transport in environmentally

friendly materials. You can make

a valuable contribution to reducing

waste and sustaining raw materials

by only disposing of packaging at

approved collection points.

Environmental

protection

and recycling

REMKO RXT...DC

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

REMKO RXT681 DC Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von REMKO RXT681 DC

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info