726826
19
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
n Control in REMKO networks with five-stage fan
control and single control on specific slave
units
Master Slave Slave
1 1 1
Master Slave 1 Slave 2
1: Addressing
Manual mode
The unit can also be started manually. Press the
RESET key on the receiver unit of the cover to
activate automatic mode.
In manual mode, the following settings apply:
Cooling mode: 24°C, fan speed: AUT
O
Heating mode: 26 °C, fan speed: AUTO
Press a key on the infrared remote control to inter-
rupt manual mode.
Display
The illuminated display LEDs indicate the set fan
speed:
LED "H" (red) = high fan speed
LED "M" (yellow) = medium fan speed
LED "L" (green) = low fan speed
H
M
L
ON
OFF
1
Fig. 4: Display on the unit
1: "RESET" key/Manual operation
If the LEDs, flash, a malfunction has occurred
on the indoor unit. (See "T
roubleshooting and
customer service" chapter )
Operation with IR remote control that is fitted
as standard
The unit is easily operated using the standard
infrared remote control. The indoor unit beeps to
acknowledge the correct transmission of data.
If it is not possible to program the indoor unit with
the remote control, then it can also be manually
operated.
The infrared remote control sends the programmed
settings a distance of up to 6 m to the receiver of
the unit.
Data will only be received correctly if the remote
control is pointed at the receiver and no objects
are obstructing the transmission path.
First insert the supplied batteries (2 each, type
AAA) into the remote control. T
o do so, pull off the
flap of the battery compartment and insert the bat-
teries correctly by polarisation (see marks).
NOTICE!
Immediately replace flat batteries with a new
set, otherwise there is a risk of leakage. It is
recommended that the batteries are removed if
the equipment is shut down for longer periods.
Max. 6 m
Fig. 5: Maximum distance
19
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für REMKO WLT-EC serie wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von REMKO WLT-EC serie

REMKO WLT-EC serie Bedienungsanleitung - Deutsch - 60 seiten

REMKO WLT-EC serie Bedienungsanleitung - Holländisch - 60 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info