Bedienungsanleitung Rendamax R3600 (Seite 9 von 51) (Englisch)

569770

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

Rendama

12 Doc890/3456CV02B

1.5 General restrictions

The application, installation and maintenance of Rendamax products must always be carried out

in accordance with the requirements (legal or otherwise), speciﬁ cations and standards applicable

to such installations.

All data, information and suggestions provided by Rendamax B.V. in relation to its products are

based on careful investigation. Nevertheless, neither Rendamax B.V. nor any other organisation

connected with Rendamax B.V. accepts any liability for application, installation or exploitation

that occurs outside its sphere of inﬂ uence.

Changes may be incorporated without prior notice.

Rendamax accepts no obligation to adapt previously deliv ered products to incorporate such

changes.

2 Description

2.1 General

The R3400/R3500/R3600 series are environmentally friendly modulat ing gas ﬁ red heating boilers

that can vary its output from 25% to 100% of its maximum capacity. The series R3400 consists of

6 types in a range from 657 to 1189 kW.

The series R3500 consists of 5 types in a range from 613 to 1000 kW. The series R3600 consists of

5 types in a range from 631 to 1031 kW.

The units have an extremely low emission of NO

and CO, so that this boiler satisﬁ es the most

stringent European require ments.

The R3400/R3500/R3600 series have CE approval for the following countries:

Austria, Belgium, Denmark, France, Germany, Ireland, Italy, The Netherlands, Spain and the

United Kingdom.

The series is registered under the product identiﬁ cation number 0063AR3514.

The units can be supplied either as a standard (category B23) or a room sealed (categories C53,

C33 or C63) appliance.

Working principle and construction

Air is blown into the appliance, as required, by a speed-con trolled fan and thoroughly mixed with

gas in the correct propor tions.

A temperature controller compares the desired water tempera ture with the temperature of the

water ﬂ ow and sends a signal to the frequency converter to maintain the correct heating capacity.

The gas/air mixture so formed is passed through a cooled premix burner and ignited. The premix

burner is constructed of ﬁ nned bimetallic pipes (internally from stainless steel and externally

from aluminium) with cast iron water headers.

Heat transfer takes place in two or three heat exchangers. The ﬁ rst heat exchanger is constructed

from smooth stainless steel pipes, while the second heat exchanger is ﬁ tted with laser welded,

stainless steel ﬁ nned pipes. Both heat exchangers are ﬁ tted with cast iron proﬁ led water distribu-

tion components (headers) which guarantee an optimum water ﬂ ow through the appliance.

The burner and the heat exchangers are connected in series.

At the R3600 a third heat exchanger is attached wich consists of one or more stainless steel ﬁ n

tube(s), switched in series, in form of a spiral. It is arranged on the back of the boiler on the ﬂ ue

gas collection chamber.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rendamax R3600 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info