Bedienungsanleitung Renegade RXV1000A (Seite 8 von 12) (Deutsch, Englisch)

700360

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

ENG

SAFETY INSTRUCTIONS

THE PURCHASED DEVICE IS ONLY SUITABLE FOR AN

OPERATION WITH A 12V ON-BOARD ELECTRICAL SYS-

TEM OF A VEHICLE. Otherwise re hazard, risk of injury

and electric shock consists.

PLEASE DO NOT MAKE ANY OPERATION OF THE

SOUND SYSTEM, WHICH DISTRACT YOU FROM A SAFE

DRIVING. Do not make any procedures, which demand a

longer attention. Perform these operations not until you have

stopped the vehicle on a safe place. Otherwise the risk of

accident consists.

ADJUST THE SOUND VOLUME TO AN APPROPRIATE

LEVEL, THAT YOU ARE STILL ABLE TO HEAR EXTE-

RIOR NOISES WHILE DRIVING. High performance sound

systems in vehicles may generate the acoustic pressure of a

live concert. The permanent listening to extreme loud music

may cause the loss of your hearing abilities. The hearing of

extreme loud music while driving may derogate your cogni-

tion of warning signals in the trafc. In the interests of the

common safeness, we suggest to drive with a lower sound

volume. Otherwise the risk of accident consists.

DO NOT COVER COOLING VENTS AND HEAT SINKS.

Otherwise this may cause heat accumulation in the device

and re hazard consists.

DO NOT OPEN THE DEVICE. Otherwise re hazard, risk of

injury and electric shock consists. Also this may cause a loss

of the warranty.

REPLACE FUSES ONLY WITH FUSE WITH THE SAME

RATING. Otherwise re hazard and risk of electric shock

consists.

DO NOT USE THE DEVICE ANY LONGER, IF A MAL-

FUNCTION, WHICH REMAINS UNREMEDIED. Refer in

this case to the chapter TROUBLE SHOOTING. Otherwise

risk of injury and the damage of the device consists. Commit

the device to an authorized retailer.

INTERCONNECTION AND INSTALLATION SHOULD BE

ACCOMPLISHED BY SKILLED STAFF ONLY. The inter-

connection and installation of this device demands technical

aptitude and experience. For your own safeness, commit

the interconnection and installation to your car audio retailer,

where you have purchased the device.

DISCONNECT THE GROUND CONNECTION FROM THE

VEHICLE’S BATTERY BEFORE INSTALLATION. Before

you start with the installation of the sound system, discon-

nect by any means the ground supply wire from the battery,

to avoid any risk of electric shock and short circuits.

CHOOSE AN APPROPRIATE LOCATION FOR THE IN-

STALLATION OF THE DEVICE. Look for an appropriate

location for the device, which ensures a sufcient air circu-

lation. The best places are spare wheel cavities, and open

spaces in the trunk area. Less suitable are storage spaces

behind the side coverings or under the car seats.

DO NOT INSTALL THE DEVICE AT LOCATIONS, WHERE

IT WILL BE EXPOSED TO HIGH HUMIDITY AND DUST.

Install the device at a location, where it will be protected from

high humidity and dust. If humidity and dust attain inside the

device, malfunctions may be caused.

MOUNT THE DEVICE AND OTHER COMPONENTS OF

THE SOUND SYSTEM SUFFICIENTLY. Otherwise the de-

vice and components may get loose and act as dangerous

objects, which could cause serious harm and damages in

the passenger room.

ENSURE NOT TO DAMAGE COMPONENTS, WIRES

AND CABLES OF THE VEHICLE WHEN YOU DRILL THE

MOUNTING HOLES. If you drill the mounting holes for the

installation into the vehicle’s chassis, ensure by any means,

not to damage, block or tangent the fuel pipe, the gas tank,

other wires or electrical cables.

ENSURE CORRECT CONNECTION OF ALL TERMINALS.

Faulty connections may could cause re hazard and lead to

damages of the device.

DO NOT INSTALL AUDIO CABLES AND POWER SUPPLY

WIRES TOGETHER. Ensure while installation not to lead

the audio cables between the head unit and the amplier

together with the power supply wires on the same side of the

vehicle. The best is a areal separated installation in the left

and right cable channel of the vehicle. Therewith a overlap of

interferences on the audio signal will be avoided. This stands

also for the equipped bass-remote wire, which should be in-

stalled not together with the power supply wires, but rather

with the audio signal cables.

ENSURE THAT CABLES MAY NOT CAUGHT UP IN

CLOSE-BY OBJECTS. Install all the wires and cables like

described on the following pages, therewith these may not

hinder the driver. Cables and wires which are installed close-

by the steering wheel, gear lever or the brake pedal, may

caught up and cause highly dangerous situations.

DO NOT SPLICE ELECTRICAL WIRES. The electrical

wires should not be bared, to provide power supply to other

devices. Otherwise the load capacity of the wire may get

overloaded. Use therefor a appropriate distribution block.

Otherwise re hazard and risk of electric shock consists.

DO NOT USE BOLTS AND SCREW NUTS OF THE BRAKE

SYSTEM AS GROUND POINT. Never use for the installa-

tion or the ground point bolts and screw-nuts of the brake

system, steering system or other security-relevant compo-

nents. Otherwise re hazard consists or the driving safety

will be derogated.

ENSURE NOT TO BEND OR SQUEEZE CABLES AND

WIRES BY SHARP OBJECTS. Do not install cables and

wires not close-by movable objects like the seat rail or may

be bended or harmed by sharp and barbed edges. If you

lead a wire or cable through the hole in a metal sheet, pro-

tect the insulation with a rubber grommet.

KEEP AWAY SMALL PARTS AND JACKS FROM CHIL-

DREN. If objects like these will be swallowed, the risk of se-

rious injuries consists. Consult promptly a medical doctor, if

a child swallowed a small object.

Renegade RXV1000A Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info