Bedienungsanleitung Renkforce 1208454 (Seite 4 von 6) (Deutsch, Englisch, Holländisch)

656685

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microﬁlming, or the capture in electronic data

processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent

the technical status at the time of printing.

Operation

Connect the consumer load to the mains socket (F).

Please consult the section “Technical Data” for the consumer load’s permis-

sible maximum power.

By using the respective “ON” or “OFF” button of the switching channel on the hand-

held radio transmitter the radio-controlled switch socket is turned on/off again with

the same set switching channel (control-LED (E) lights up or turns off).

Maintenance and Care

The product does not require any maintenance and should never be opened or disas-

sembled for any reason.

Remove connected consumer loads from the radio-controlled switch socket and re-

move it from the mains socket, before cleaning the product.

Only clean the product with a soft, clean, dry cloth. Never use aggressive cleaning

agents or chemical solutions, since they might damage the surface of the housing or

impair the function.

Handling

• The product is only to be used in closed, dry indoor locations. The product

must not get damp or wet.

• Avoid the following unfavourable environmental conditions at the installa-

tion location and during transportation:

- Excessive humidity or dampness

- Direct sunlight

- Extreme cold or heat

- Dust or ﬂammable gases, fumes or solvents

- Strong vibrations

- Strong magnetic ﬁelds such as those found in the vicinity of machinery

or loudspeakers

• Ensure that the insulation for the entire product is neither damaged nor

destroyed. Never disassemble the product! There are no serviceable

parts inside.

• Check the product for damage before each use!

If you recognize damages, don’t use the product any longer! There is dan-

ger to life through an electric shock!

Safe operation must be presumed to be no longer possible:

- if the device is visibly damaged

- if the device no longer works

- if the device was stored under unfavourable conditions for a long period

of time

- Following considerable stress during transportation

Range

The transmission range of the radio signals, between the hand-held transmitter and

the radio-controlled switch sockets, is up to 30 m under optimum conditions.

This value, however, is the so-called “open space range” (the range when

transmitter and receiver are visible to each other, without interfering inﬂu-

ences).

In practice, however, there may be walls, room ceilings etc. between the

transmitter and the receiver which reduce the range accordingly.

Due to the different inﬂuences on the wireless transmission, no speciﬁc

range can be guaranteed.

Nevertheless, trouble-free operation in a single-family home is usually pos-

sible.

Sometimes the range can be considerably reduced due to:

• Walls, reinforced concrete ceilings

• Coated/metallised insulated glass

• Proximity to metallic & conductive objects (e.g., heating elements)

• Proximity to human bodies

• Broadband interferences, e.g. in residential areas (DECT telephones, mobiles, radio-

controlled headphones, radio-controlled speakers, other radio-controlled weather

stations, baby phones etc.)

• Proximity to electric motors, transformers, power-supply units, computers

• Proximity to computers or other electrical devices that are improperly shielded or

operated without any cover

Disposal

a) General

Please dispose of the products when they are no longer of use, according to

the current statutory requirements.

b) Normal and rechargeable batteries

As the end user, you are required by law (Battery Ordinance) to return all used bat-

teries/rechargeable batteries; disposal of them in the household waste is prohibited.

Contaminated batteries/rechargeable batteries are labelled with this symbol

to indicate that disposal in the domestic waste is forbidden. The designa-

tions for the heavy metals involved are: Cd = Cadmium, Hg = Mercury, Pb =

Lead.

Used batteries/rechargeable batteries as well as coin cells can be returned to collec-

tion points in your municipality, our stores or wherever batteries/rechargeable batter-

ies/coin cells are sold!

You therefore fulﬁl your statutory obligations and contribute to the protection of the

environment!

Declaration of Conformity (DOC)

We, Conrad Electronic, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that

this product conforms to the fundamental requirements and the other relevant regula-

tions of the directive 1999/5/EC.

The Declaration of Conformity for this product is available at

www.conrad.com.

Technical Data

a) Hand-held radio transmitter

Transmission frequency ............ 433 MHz

Power supply .............................. 1x 12 V battery, type “23A”

Address codes............................ 4 (to be set via the sliding switch I, II, III, IV)

Switching channels ................... 4 (each with “ON” and “OFF”-button)

Range ........................................... up to 30 m (open space, see chapter “Range”)

LED................................................ lights up brieﬂy, when the buttons are used

Operating environment ............. only suitable for enclosed, dry indoor locations

b) Radio-controlled switch socket

Reception frequency ................. 433 MHz

Operating voltage....................... 230 V/AC, 50 Hz

Protection class ......................... I

Input power ................................. 2000 W Ohm resistive load, 300 W inductive load

Address codes............................ 4 (to be set via the turn-switch I, II, III, IV)

Switching channel ..................... adjustable with turn-switch “1 2 3 4”

LED................................................ lights up, when the mains socket/consumer load is ac-

tivated

Operating environment ............. only suitable for enclosed, dry indoor locations

Renkforce 1208454 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info