Bedienungsanleitung Renkforce 1230711 - LED Sport-Armband BT 4.0 (Seite 5 von 6) (Deutsch, Englisch)

656692

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

• You can nd the SmartBand app on the iOS app store or on Google Play by searching

for “SmartBand”.

• Install the latest version of the app on your mobile device.

d) Pairing with a mobile device

The sport wristband is paired directly via the SmartBand app and not via

the Bluetooth

settings on your mobile device. Check that Bluetooth

enabled on your mobile device. The mobile device must support Bluetooth

version 4.0.

• Open the SmartBand app.

• Tap the top-left of the control panel to open the app's main menu.

• Select “Setting”.

• Scroll down until you can see the “Wrist Band Setting” menu option.

• Tap the “Wrist Band” submenu. Tap on “Pair” on the next page.

• When the app is searching for Bluetooth

devices, press and hold the function

button (1) on the LED unit. Let go when MENU is displayed. Wait until PAIR is

displayed and briey press the function button. PAIR begins to blink.

• DONE is displayed when pairing has been completed successfully. PAIR will

disappear after about 20 seconds if pairing with the app was unsuccessful.

• Training data will be synced automatically as soon as the sport wristband is

connected to the SmartBand app. Bluetooth must be enabled in the mobile device

settings for this function to work. Syncing takes place automatically each time you

open the SmartBand app.

• To unpair your mobile device and the sport wristband, go to the the “Wrist Band”

submenu as described above and then tap “Unpair”.

Operation

a) Turning on/o, calling up menus

• Press and hold the function button (1) to turn the wristband on. A welcome message

will be displayed.

• Press the function button and hold it down until MENU is displayed. All available

main menus will be displayed in a loop (g. 6). Wait until the desired menu appears.

Briey press the function button when a menu item is displayed in order to select it.

Fig. 6

• Wait until OFF is displayed. Then press the function button to turn the wristband o.

A goodbye message will be displayed.

b) Recording and viewing training data

• Press and hold the function button (1) until MENU appears.

• Wait until WORK is displayed.

• Press the function button to start recording data. GO is displayed. You can now

begin your training program.

• Press the function button during your training to display the intermediate training

values (g. 7).

Fig. 7

Training time Number of steps

Distance coveredCalories burnedTraining progress

• Press and hold the function button until STOP and DONE are displayed. Data

recording for your training session is stopped. REC appears. The saved data will

then be displayed automatically (g. 8).

”Number of steps”, “completed distance”, “calories burned” and “training

progress” must be activated in the SmartBand app in order to view them on

the display of the LED unit.

Fig. 8

Training time Number of steps

Distance

covered (km)

Calories burnedTraining progress

• You can view the data of the previous training session again at a later date. Keep

pressing the function button until REC is displayed. The data will be displayed one

after another in a loop after REC.

c) Storage

Your training data is transferred to the SmartBand app when you carry out a sync.

The LED unit stores minute-by-minute information from the last seven days and an

overview of daily training in the last 30 days.

Sync the LED unit regularly so that the SmartBand app displays as many details as

possible.

d) Selecting the display mode

• There are various display modes available for training data (g. 9). Press the function

button to switch to the next display mode.

• When the display on the LED unit turns o, press the function button once to view

the most recent display mode.

The DAILY, STEP, DIST and CAL display modes must be enabled in the

SmartPhone app in order for them to be displayed on the LED unit.

Fig. 9

Daily values Number of steps

Distance coveredCalories burnedPrevious training data

General

information

General information

• In this display mode, general information is automatically displayed in a continuous

loop (g. 11).

• MOVE shows the total duration of your training activities for each day. ACTIVE

shows the daily cumulative duration of intensive training activities (e.g. running).

• Training progress is shown with symbols which represent a percentage of the set

training goal (g. 10).

Fig. 10

<10 %

10 - 40 %

40 - 70 %

100 %

70 to under 100 %

The MOVE and ACTIVE displays must be enabled in the SmartBand app in

order for them to be displayed on the LED unit.

Fig. 11

Time Training progress Total time (movements) per day

Total time (very active time) per day

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Renkforce 1230711 - LED Sport-Armband BT 4.0 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Renkforce 1230711 - LED Sport-Armband BT 4.0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info