Bedienungsanleitung Renkforce Key safe 20 (Seite 2 von 4) (Deutsch, Englisch, Holländisch, Französisch)

622830

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

Operation

Insert the key in the lock on the front side of the safe. In doing that, observe the correct

position of the key.

Open or close the lock of the safe as usual by turning the key.

Keep the key in a safe, but not directly accessible place. You may never keep the safe

key e.g. in a conventional key cabinet, in which other house or cellar keys may be

present

Tips and notes

• The product is suitable for storing valuables and /or protection against unauthorised

access.

Anti-theft protection is achieved constructively, namely through the steel sheet

casing, the door and the double-bit key lock design. Unauthorised access to the

valuables stored in the safe is thus impeded.

• Make sure that no one is watching you when you are opening / closing the safe.

• The thick door with the included lock mechanics does not give access to the entire

interior of the safe. Close the door carefully, do not use excess force! Otherwise,

you may damage the valuables in the safe.

Maintenance and care

• The product is maintenance-free.

• Protect the lock of the safe from dust, dirt and moisture. Otherwise, the lock may

become difﬁ cult to use. In this case, a few drops of thin spray oil can be a remedy.

• Clean the safe occasionally with a clean, soft, dry cloth. Never use aggressive

cleaning agents or chemical solutions as the surface of the casing could be dama-

ged (discoloured).

Disposal

Dispose of an unserviceable product in accordance with the relevant statu-

tory regulations.

Technical data

Dimensions ......................................... Outside: 200 x 310 x 200 mm (H x W x D)

............................................................... Inside: 195 x 305 x 155 mm (H x W x D)

Door area ............................................ 135 x 215 mm (H x W)

Wall thickness ................................... Casing: 1.5 mm; door: 3 mm

Volume ................................................. ca. 9,3 l

Weight ................................................. 5.25 kg

Variations in dimensions and weight are dependent on the production tech-

nique.

Operating instructions

Key safe “20”

Item no. 755003

Intended use

The safe is used for keeping valuables. It has a stable steel sheet casing and can be

mounted either on a wall or a stable surface.

Follow the safety instructions and all other information in this operating manual.

This product complies with the applicable National and European requirements. All

names of companies and products are the trademarks of the respective owner. All

rights reserved.

Package contents

• Safe

• Two keys

• 4 screws and 4 ﬂ at washers

• Operating instructions

Explanation of the symbols

This symbol indicates speciﬁ c risks associated with handling, function and

use.

The “arrow“ symbol indicates special tips and operating information.

Safety instructions

The warranty will be void in the event of damage caused by failure to ob-

serve these safety instructions! We do not assume any liability for any con-

sequential damage!

Nor do we assume any liability for material and personal damage caused

by improper use or non-compliance with the safety instructions! In such

cases, the warranty will be null and void.

• For safety reasons, any unauthorised conversion and/or modiﬁ cation to

the product is not permitted

• The product must not be exposed to extreme temperatures, strong vibra-

tions or heavy mechanical loads. Protect the product from humidity and

dampness.

• The product is not a toy and should be kept out of the reach of children!

• Do not leave packing materials unattended. They may become dangerous

playthings for children.

Installation

Select an installation location, such that the safe is not directly visible or easily ac-

cessible. This can be, for instance, behind the cabinet door or books, ﬁ les or the like.

Installation in a partition wall (hollow wall) would be ideal; a picture can be hung in

front of the door.

Protect the safe from humidity or dampness. Therefore, do not mount the

safe in humid rooms or cellars.

The holes in the casing of the safe allow mounting both on a wall and the ﬂ oor or

another stable surface.

Corresponding screws and appropriate dowels are needed depending upon the

mounting surface.

Additional ﬁ xation using special adhesives, etc. would also be possible, if the moun-

ting surface allows this.

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microﬁlming, or the capture in electronic data

processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent

the technical status at the time of printing.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Renkforce Key safe 20 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info