692210
38
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
38
e) Conguring parameters during the printing process
Only recommended for experienced users.
Go to the < Option > menu and select < Printing > to set the print speed, nozzle/hot plate temperature and fan/
lament loading speed.
Print speed: Observe the printing process and adjust the print speed accordingly. The print speed affects
the print quality for certain objects and laments. For example, if the print speed is too high, the printed
object may not adhere properly to the print bed.
Nozzle temperature: Do not use the nozzle continuously at 260 °C. Continuously operating the printer
at temperatures above 260 °C signicantly reduces the life span of the extruder. Allow the printer to cool
down before using it again.
Hot plate temperature (order no. 1592461): Adjust the hot plate temperature when printing objects with
ABS.
Flow (load speed of the lament in the extruder): Observe the printing process and adjust the speed
accordingly. If the speed is too high, the nozzle may become blocked.
Fan speed for cooling the printed object: Let the object cool down for a few minutes when it has nished
printing. If the object is not easy to remove, carefully detach it using the scraper.
The fan speed for cooling the motor cannot be set manually. The fan turns off automatically when the
nozzle temperature reaches 40 °C.
Stopping the printing process
To stop printing, go to the < Printing > menu and select < Stop >. It may take several seconds for the 3D printer to
come to a complete standstill.
The nozzle will return to its initial position and the print bed will move downwards. The nozzle will start to cool down.
f) Restarting the 3D printer
Restart the 3D printer in the following scenarios:
- If incorrect/no information is displayed on the colour touchscreen display.
- If the 3D printer does not work properly.
If a USB cable is connected, unplug it from the printer.
Switch the 3D printer off. Wait for a moment and turn it back on. You can now use the printer as normal.
38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Renkforce RF100 XL plus wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Renkforce RF100 XL plus

Renkforce RF100 XL plus Bedienungsanleitung - Deutsch - 62 seiten

Renkforce RF100 XL plus Bedienungsanleitung - Holländisch - 64 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info