109
d) Explanation on the Configuration Files on the Enclosed SD Card
This chapter is only targeted at users who do not have the custom version of the software installed. If you have instal
-
led the custom version (can be recognised by the image of the RF1000 3D-printer when the programme starts), you may
skip this chapter. It only serves information purposes then.
The folder “Slic3r Settings” on the enclosed SD-card contains dierent configuration files (.ini-files) for the basic version of the
software Repetier-Host.
If you have installed the custom version adjusted for the RF1000 of the Repetier-Host software, configuration files are already
integrated into the software.
The files are designated as follows:
Printer name_Filament material_Layer thickness_Nozzle diameter.ini
Example:
RF1000_ABS300_100_05.ini = Printer RF1000_Filament 3mm ABS_Layer thickness 100 µm (=0.1 mm)_Nozzle Diameter 0.5 mm
The option VASE permits printing of objects with filling (e.g. cylinder) as hollow bodies without having to produce the
corresponding 3D file for it.
If a cylinder-shaped body is printed with the option VASE, the resulting object has a bottom plate and a thin outer wall
(like a vase).
e) Setting up the Slicer
This chapter is only targeted at users who do not have the custom version of the software installed. If you have instal
-
led the custom version (can be recognised by the image of the RF1000 3D-printer when the programme starts), you can
ignore this chapter. It only serves information purposes then.
Click the tab “Slicer”.
(1) In “Slicer”, select the programme “Slic3r”.
(2) Click “Configure” to set up the programme on the 3D-printer.
