Bedienungsanleitung Respekta KS88.0 (Seite 27 von 35) (Deutsch, Englisch)

793551

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

EN - 27

3.1 Thermostat Setting

The thermostat automatically regulates the

temperature inside the cooler and freezer

compartments. Refrigerator temperatures

can be obtained by rotating the knob

to higher numbers; 1 to 3, 1 to 5 or SF

(Maximum numbers on the thermostat

depends on your product.)

Super switch

(In some models)Thermostat knob

Lamp cover

(The images are representative)

Thermostat settings:

1 – 2 : For short-term storage of food

3 – 4 : For long-term storage of food

5 : Maximum cooling position. The

appliance will work longer.If required,

change the temperature setting.

If device has SF position:

• Turn the knob to SF to freeze fresh

food quickly. In this position, the freezer

compartment will operate at lower

temperatures. After your food freezes,

turn the thermostat knob to its normal

use position. If you do not change the

SF position, your appliance work will

automatically return to its last used

thermostat position according to the

time indicated in the note. Return the

thermostat switch to the SF position

and return it to normal use according

to the time indicated in the note.If the

thermostat switch is in the SF position

when your appliance is rst started, your

appliance work will automatically return

to the operation in the thermostat-3

position according to the time indicated in

the note.

3.2 Temperature Settings Warnings

• Your appliance is designed to operate in

the ambient temperature ranges stated

in the standards, according to the climate

class stated in the information label. It

is not recommended that your fridge is

operated in the environments which are

outside of the stated temperature ranges.

This will reduce the cooling e󰀩ciency of

the appliance.

• Temperature adjustments should be

made according to the frequency of

door openings, the quantity of food kept

inside the appliance and the ambient

temperature in the location of your

appliance.

• When the appliance is rst switched on,

allow it to run for 24 hours in order to

reach operating temperature. During this

time, do not open the door and do not

keep a large quantity of food inside.

• A 5 minute delay function is applied

to prevent damage to the compressor

of your appliance when connecting

or disconnecting to mains, or when

an energy breakdown occurs. Your

appliance will begin to operate normally

after 5 minutes.

Larders (coolers) have not any freezer

compartment but can cool up to

4 - 6 °C.

Climate class and meaning:

T (tropical): This refrigerating appliance

is intended to be used at ambient

temperatures ranging from 16 °C to 43 °C.

ST (subtropical): This refrigerating

appliance is intended to be used at ambient

temperatures ranging from 16 °C to 38 °C.

N (temperate): This refrigerating appliance

is intended to be used at ambient

temperatures ranging from 16 °C to 32 °C.

SN (extended temperate): This

refrigerating appliance is intended to be

used at ambient temperatures ranging from

10 °C to 32 °C.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Respekta KS88.0 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info