Bedienungsanleitung Ricoh Caplio G3 (Seite 8 von 17) (Englisch)

104043

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

161

Appendices

I cannot check shot

images.

The image confirmation time is too

short.

Lengthen the image confirmation time. p.103

Images do not

appear on the LCD

Monitor.

The power is not on. Or the LCD

Monitor is dark.

Turn the power on. Or adjust the brightness of

the LCD Monitor.

p.13

p.104

The video cable is connected. Disconnect the video cable. p.83

The screen display status is in

[SYNCHRO-MONITOR MODE].

Press the Display button and switch display. p.21

It is set to [Power-Save]. Set [Power-Save] to off. p.99

Although it is set to

Auto Focus, it does

not focus.

The lens is dirty. Wipe clean with a soft, dry cloth. —

The subject is not in the center of the

shooting range.

Shoot with Focus Lock. p.35

It is a hard-to-focus subject. Shoot with Focus Lock or Manual Focus. p.35

p.58

The flash does not

fire. Or the flash

cannot recharge.

The Shooting Mode is set to

(Multi-Shot) or

3 (Movie).

Switch the Shooting Mode to

5 (Still Image). p.47

The flash is set to (Flash Off).

Set to Flash Off with the

F button. p.47

The White Balance is set to

something other than Auto mode.

Set the White Balance to Auto mode. p.52

Batteries are running low. If using alkaline batteries, replace with a new

set.

If using rechargeable batteries, recharge or

use the AC Adaptor.

p.9

p.10

p.11

Even though the

flash fired, the

picture is dark.

The distance to the subject is greater

than 2.5 meters in Telephoto or

greater than 4.5 meters in Wide-

angle.

Get closer to your subject and shoot. p.47

The image is too

bright.

You are too close to the subject. Set to Flash Off with the

F button. p.47

It is over-exposed. Use exposure compensation. Cancel

Exposure Time.

p.50

p.66

The brightness of the LCD Monitor is

odd.

Adjust the brightness of the LCD Monitor. p.104

The image is too

dark.

The shot was taken in a dark place

while set to (Flash Off).

Release the Flash Off with the

F button. p.47

It is under-exposed. Use exposure compensation. Set to Exposure

Time.

p.50

p.66

The brightness of the LCD Monitor is

odd.

Adjust the brightness of the LCD Monitor. p.104

The image lacks

natural color.

The picture was shot in conditions

that are hard for Auto White Balance

to adjust to.

Add a white object to the composition. Or use

Auto Balance in a setting other than Flash

shooting or Auto Mode.

p.52

The date, or

recording

information does not

appear.

The screen display function is set to

No Display.

Press the

E button and switch

display.

p.21

The brightness of

the LCD Monitor

changes during AF.

You are using it in a dark place or

when Auto Focus range and

surrounding brightness are different.

This is normal. —

There is a vertical

smear on the image.

This is a phenomenon that occurs

when a bright subject is shot. It is

called the smear phenomenon.

This is normal. —

Symptom Cause Measure Page

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ricoh Caplio G3 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ricoh Caplio G3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info