104056
161
Zoom out
Zoom in
Vorherige Seite
1/172
Nächste Seite
Do not connect the USB cable yet!
If you connect the camera to a computer through the
USB cable before installing the provided software on the
computer, the software required for connection between
camera and computer may not be installed
appropriately.
Be sure to connect the camera to your computer after
installing the provided software.
For how to install the software, see P.131.
About other documentation
Detailed explanations on how to use the provided
software can be found in "Software User Guide" (PDF
format file) included on the supplied CD-ROM.
For how to display the PDF file, see P.135.
Camera User Guide
Caution!
Quick Guide
A Variety of Shooting
Techniques/Playback
Changing Camera
Settings
Installing Software
Troubleshooting
The serial number of this product is given
on the bottom face of the camera.
Preface
This manual provides information on how to use the shooting and playback functions of this
product, as well as warnings on its use. To make the best use of this product's functions, read
this manual thoroughly before use. Please keep this manual handy for ease of reference.
Ricoh Co., Ltd.
This publication may not be reproduced in whole or in part without the express written permission of Ricoh.
©
2005 RICOH CO.,LTD. All rights reserved.
The contents of this document may be changed in the future, without prior notice.
This booklet was created with thorough attention to its content. If, however, you have a question, spot an
error, or find a description lacking, please refer to the end of this booklet for information on how to contact us.
Microsoft, MS, Windows and DirectX are registered trademarks of Microsoft Corporation in the United States of
America and other countries.
Adobe and Adobe Acrobat are trademarks of Adobe Systems Incorporated.
All trademarked company and product names mentioned in this manual are the property of their respective
owners.
Safety Precautions For the safe use of your camera, be sure to read the
safety precautions thoroughly.
Test shooting Please be sure to do some test shooting to make sure it
is recording properly before normal use.
Copyright Reproduction or alteration of copyrighted documents,
magazines, music and other materials, other than for
personal, home or similarly limited purposes, without the
consent of the copyright holder is prohibited.
Exemption from
Liability
Ricoh Co., Ltd. assumes no liability for failure to record or
play back images caused by malfunction of this product.
Warranty This product is manufactured to local specifications and
the warranty is valid within the country of purchase.
Should the product fail or malfunction while you are
abroad, the manufacturer assumes no responsibility for
servicing the product locally or bearing the expenditure
incurred thereof.
Radio Interference Operating this product in the vicinity of other electronic
equipment may adversely affect the performance of both
devices. In particular, operating the camera close to a
radio or television may lead to interference. If
interference occurs, follow the procedures below.
Move the camera as far away as possible from the TV, radio or other
device.
Reorient the TV or radio antenna.
Plug the devices into separate electrical outlets.
1
Key Features
Equipped with a wide zoom lens in
4.8x high magnification
This product has a compact body only 25
mm thick, featuring a 28 to 135mm* wide
4.8x lens that applies to most normal
shooting. The lens supports the shooting of
various indoor and outdoor scenes.
* Equivalent to that on a 35mm camera
Rapid shutter response to capture a
moment (P.31)
The shutter release time lag is as short as
0.1 seconds.
Ricoh's patented hybrid auto focusing
system technology even keeps action shots
looking good.
1-cm macro (P.37) and close
flashing for 13 cm (for Telephoto)
or 20 cm (for Wide-angle) (P.38)
The unsurpassed macro function allows you
to capture details from a very close distance
at only 1 cm. The camera also has a built-in
flash for very close shots within 13 cm (for
Telephoto) and 20 cm (for Wide-angle). This
combination will give you clear macro shots
even under low light conditions.
AF target shift function for easy
focus lock even on a tripod (P.83)
The camera has an AF target shift function.
At macro shooting, the AF target shift
function allows you to lock the focus by
button operation, without moving the camera
itself.
2
Choice of three power sources
makes sure you wont miss any
shooting opportunities (P.16)
The camera can be used with one of three
power supplies: Dedicated large-capacity
rechargeable battery, an AA alkaline battery
easily available anywhere (available in
stores), and an economical AC adapter (sold
separately) useful for transfer to a computer.
Adjust (ADJ.) button for easy
customizing to optimum setting
(P.57)
The ADJ. button reduces button operation
steps. It allows you to quickly adjust the
exposure, white balance, and ISO sensitivity
with minimum steps. You can also assign a
function as required.
High-quality movie with sound of 30
or 15 frames/second (P.89)
A high-quality movie of 320 x 240 pixels can
be shot at 30 frames/second with sound.
Scene mode for easy and beautiful
shooting (P.39)
In Scene Mode, you need only to select from
among six types of shooting modes for
shooting with optimal settings for the scene.
3
Instant transfer to PC through the
USB cable
If the provided software is installed on your
computer, just connecting the camera to
your computer with the provided USB cable
will automatically transfer images to your
computer.
Provided with multi-functional
software "ImageMixer" that helps in
not only managing shot images in
an album, but also editing images
and sounds, and creating video CDs
For the integrated handling of images, this
software has a input function to download
still images, movies, and sounds from a
digital camera or music CD, an album
function to manage captured contents, an
edit function to edit movies by MPEG-1, a
layout function to create layouts using still
image contents, and a disk creation function
to create video CDs.
Direct printing without requiring any
computer (P.52)
A direct print compatible printer can be
connected to the camera with the USB cable
for direct transfer. This allows for easy
printing without using a computer.
4
Contents
Chapter 1 Quick Guide
Before Shooting .......................................................................................... 10
Packing List.................................................................................................................. 10
Names of parts............................................................................................................. 12
About LCD Monitor Display.......................................................................................... 14
Getting Ready to Shoot .............................................................................. 16
About the Batteries....................................................................................................... 16
Batteries (Cells) Not Acceptable .................................................................................. 17
Battery level indication ................................................................................................. 18
About an SD Memory Card (available in stores) .......................................................... 19
Charging the Rechargeable Battery ............................................................................. 20
Loading the Rechargeable Battery and SD Memory Card ........................................... 21
Inserting Dry Cells (available in stores)........................................................................ 23
Turning the Power On/Off ............................................................................................ 24
Setting the language .................................................................................................... 25
Setting the date and time ............................................................................................. 26
Changing the Display ................................................................................................... 27
Maximizing the LCD Monitor Brightness ...................................................................... 27
Histogram Display ........................................................................................................ 28
Basic Shooting............................................................................................ 29
How to Hold the Camera .............................................................................................. 29
Preventing camera shake............................................................................................. 30
Capturing the Moment Shooting (Full-press) ............................................................... 31
Checking the Focus and Shooting (Half-press)............................................................ 32
When the Subject is not Centered (Shooting with Focus-lock) .................................... 34
Using the Zoom Function ............................................................................................. 36
Shooting Close-Ups (Macro-Mode).............................................................................. 37
Using the Flash ............................................................................................................ 38
Shooting with Scenery-Matching.................................................................................. 39
Playing Back................................................................................................ 41
Checking the image you just took (Quick Review) ....................................................... 41
Viewing Your Images ................................................................................................... 42
Playing back in the three-frame view ........................................................................... 43
Thumbnail Display........................................................................................................ 45
Magnifying Images ....................................................................................................... 46
Viewing on a Television ............................................................................. 47
Erasing......................................................................................................... 49
Erasing Unwanted Images ........................................................................................... 49
Erasing Multiple Frames at One Time.......................................................................... 50
Chapter 2 A Variety of Shooting Techniques/Playback
Direct Printing ............................................................................................. 52
Direct Print Function..................................................................................................... 52
Connecting the Camera to a Printer............................................................................. 52
Printing Still Images...................................................................................................... 53
5
A Variety of Shooting Techniques ............................................................ 57
Using the ADJ. (Adjust) Button..................................................................................... 57
Shooting Setting Menu................................................................................................. 58
Using the Shooting Setting Menu................................................................................. 59
Choosing Picture Quality Mode/Image Size (PIC QUALITY/SIZE).............................. 60
Manual Focus Shooting (FOCUS)................................................................................ 62
Changing the Light Metering (PHOTOMETRY) ........................................................... 65
Changing the Edge Quality of Still Images (SHARPNESS) ......................................... 66
Setting Color Depth (COLOR DEPTH)......................................................................... 67
Shooting Consecutively with Different Exposures (AUTO BRACKET) ........................ 68
Shooting Consecutively with Different White Balance (WHITE BALANCE BRACKET) 69
Using Long Time Exposure (TIME EXPOSURE)......................................................... 71
Shooting Pictures Automatically at Set Intervals (INTERVAL)..................................... 72
Shooting a Still Image with Sound (IMAGE WITH SOUND) ........................................ 74
Inserting the Date into a Still Image (DATE IMPRINT)................................................. 75
Changing the Exposure (EXPOSURE COMP.)............................................................ 76
Using Natural and Artificial Lighting (WHITE BALANCE)............................................. 77
Changing Sensitivities (ISO SETTING)........................................................................ 79
Limiting the Shutter Release Speed (SLOW SHUTTER LMT)..................................... 80
Returning the Shooting Setting Menu Settings to their Defaults (RESTORE DEFAULTS) . 81
Changing Shading for Shooting Text (DENSITY) ........................................................ 82
Using the AF Target Shift Function .............................................................................. 83
Using the Self-Timer..................................................................................................... 84
Shooting with Multi-Shot............................................................................ 85
CONT .......................................................................................................................... 87
SCONT (S Multi-Shot)................................................................................................. 87
MCONT (M Multi-Shot)................................................................................................ 87
Viewing an S Multi-Shot or M Multi-Shot Still Image in Enlarged Display Mode.......... 88
Shooting/Playing Back Movies.................................................................. 89
Shooting Movies........................................................................................................... 89
Setting the Frame Rate ................................................................................................ 90
Playing Back Movies .................................................................................................... 91
Recording/Playing Back Sound................................................................. 92
Recording Sound (Voice Memo) .................................................................................. 92
Playing Back Sound ..................................................................................................... 93
Other Functions Available in Playback Mode .......................................... 94
Playback Setting Menu................................................................................................. 94
Using the Playback Menu............................................................................................. 94
Showing Photos in Order Automatically (SLIDE SHOW)............................................. 95
Write-protecting Your Images (PROTECT) .................................................................. 96
Using a Printing Service (DPOF: Dee-Pof) .................................................................. 99
Changing the Image Size (RESIZE)........................................................................... 102
Copying the Contents of Internal Memory to a Memory Card (COPY TO CARD) ..... 103
Chapter 3 Changing Camera Settings
Changing Camera Settings ...................................................................... 106
SETUP Menu ............................................................................................................. 106
Using the SETUP Menu ............................................................................................. 107
Getting the SD Memory Card Ready for Use (FORMAT [CARD]) ............................. 108
Formatting Internal Memory (FORMAT [INT. MEM.]) ................................................ 109
Adjusting the Brightness of the LCD Monitor (LCD BRIGHTNESS) .......................... 110
6
Setting a Function to the ADJ. Button (ADJ BTN.SET.)............................................. 111
Changing Auto Power-Off Settings (AUTO POWER OFF) ........................................ 112
Changing the Beep Sound Setting (BEEP SOUND) .................................................. 113
Changing the Beep Sound Volume (Volume Setting) ................................................ 114
Changing Image Confirmation Time (LCD CONFIRM.) ............................................. 115
Changing File Name Settings (SEQUENTIAL NO.) ................................................... 116
Setting the Date and Time (DATE SETTINGS).......................................................... 117
Changing the Display Language (LANGUAGE/ ᜘᝙ )............................................... 118
Changing the Playback Method for Viewing on TV (VIDEO OUT MODE) ................. 119
Changing the Setting of Step Zooming (STEP ZOOM).............................................. 120
Displaying a Setting Change Warning (SHTG STGS WARNG.)................................ 121
Changing the USB Communication System (USB Connection)................................. 122
Enlarging Icon Display (ENLGE PHOTO ICON) ........................................................ 126
Chapter 4 Installing Software
Installing the Provided Software (For Windows) ................................... 128
System Requirements for Using the Provided Software ............................................ 130
Installing the Software on Your Computer.................................................................. 131
Connecting the Camera to Your Computer ................................................................ 133
Installing Acrobat Reader........................................................................................... 135
Installing DirectX ........................................................................................................ 136
Uninstalling the Software............................................................................................ 137
Uninstalling the ImageMixer ....................................................................................... 138
Installing the Provided Software (For Macintosh) ................................. 139
System Requirements for Using the Provided Software ............................................ 141
Installing the Software on Your Computer (Mac OS 8.6 to 9.2.2) .............................. 142
Installing the Software on Your Computer (Mac OS X 10.1.2 to 10.3)....................... 143
Chapter 5 Troubleshooting
Troubleshooting........................................................................................ 146
Troubleshooting the Camera...................................................................................... 146
Warning Messages Under Windows XP Service Pack 2 ........................................... 151
Appendices................................................................................................ 153
A. Specifications......................................................................................................... 153
B. Optional Accessories ............................................................................................. 155
C. Combination of Scene Mode and Function............................................................ 156
D. Menu Items By Mode............................................................................................. 157
E. Functions Whose Defaults will be Restored upon Power-off ................................. 158
F. Number of Images That Can be Stored in Internal Memory/SD Memory Card...... 159
G. Using Your Camera Abroad .................................................................................. 160
H. Cautions on Use .................................................................................................... 161
I. Care and Storage.................................................................................................... 162
J. Error Messages ...................................................................................................... 163
K. Warranty and Servicing.......................................................................................... 164
Index........................................................................................................................... 166
7
Using Manuals
The two manuals included are for your Caplio R2.
To copy the Software User Guide onto your hard disk
Copy the PDF file from the above folder.
Camera User Guide (This booklet)
This guide explains the usage and functions of the
camera.You will also see how to install the provided
software on your computer.
*The Software User Guide (English edition) is available
from the provided CD-ROM as a PDF file.
Software User Guide (PDF file)
This guide explains how to download images from the
camera to your computer, and display and edit them on
your computer.
*The Software User Guide is available from the follow-
ing folder on the provided CD-ROM.
"Software User Guide (English
edition)" (PDF file)
Each language has its own Software
User Guide in the respective folder.
8
Reference
The camera is provided with software (ImageMixer) that allows you to display and edit
images from your computer. For how to use ImageMixer, click the [?] button on the
ImageMixer window and see the displayed manual.
For more information on the ImageMixer, contact the Customer Support Center below.
North America (Los Angeles) TEL: +1-213-341-0163
Europe (U.K.) TEL: +44-1489-564-764
Asia (Philippines) TEL: +63-2-438-0090
China TEL: +86-21-5450-0391
Registration time: 9:00 - 17:00
How to Use This Guide
Chapter 1 explains the basic operations of this product.
If you are using the camera for the first time, read from this chapter.
The following symbols are also used in this guide:
The LCD Monitor Display examples may be different from actual
display screens.
Important
This indicates important notices and restrictions for using this camera.
Note
This indicates supplementary explanations and useful tips about camera
operations.
Term
This indicates terms that are useful for understanding the explanations.
Reference
This indicates page(s) relevant to a particular function.
Chapter 1
Quick Guide
If you are using the camera for the first time,
read from this chapter.
Before Shooting ............................................... 10
Getting Ready to Shoot................................... 16
Basic Shooting................................................. 29
Playing Back .................................................... 41
Viewing on a Television .................................. 47
Erasing.............................................................. 49
10
Before Shooting
Packing List
Open the package and make sure all the items are included.
Caplio R2
AV Cable
Used when viewing your images on a TV
unit.
USB Cable
Used to connect the camera to a computer
or Direct Print supported printer.
Handstrap
Rechargeable Battery
Battery Charger
Note
Attaching the hand strap to the camera
Thread the tips of the strap through the
camera's strap eyelet and loop them as
shown.
The serial number of this product is given
on the bottom face of the camera.
11
Quick Guide
Camera User Guide
(This booklet)
Warranty
Safety Precautions
Caplio Software CD-ROM
The provided software and the Software
User Guide are included on this CD-ROM.
Optional Accessories
AC Adapter (AC-4b)
Used for power supply from a home outlet
to the camera. Connect this adapter for
long time play or image transfer to a
personal computer.
Rechargeable Battery (DB-50)
PC Card Adapter (FM-SD53)
For when you want to load an SD Memory
Card directly into your computer's PC Card
Slot.
SD Memory Card (available in
stores)
Reference
For the latest information about accessories, access Ricoh home page
(http//:www.ricohpmmc.com).
12
Names of parts
Camera
Front View
Mode Selector
You can select one of the three modes with the mode selector.
Item Name Refer to
1
Shutter Release Button P.29
2
AF Window
-
3
Lens Cover
-
4
Microphone P.92
5
Flash P.38
6
Power Switch P.24
7
Lens P.29
Still Image Mode Allows you to shoot still images.
Movie Mode Allows you to shoot movies.
Voice Memo Mode Allows you to record sounds.
13
Quick Guide
Rear View
Item Name Refer to Item Name Refer to
1
LCD Monitor -
12
Battery/Card Cover
-
2
Auto Focus/
Flash Lamp
P. 3 2
P. 3 8
13
!/MODE Button P.39
3
Mode Selector P.12
14
$ /Q(Quick Review)Button P.41
4
Z (Wide-angle) /
9 (Thumbnail Display)
Button
P. 3 6
P. 4 5
15
O Button
-
5
z (Telephoto)/
8 (Enlarged View) Button
P. 3 6
P. 4 6
16
"/N (Macro) Button P.37
6
Playback Button P.41
17
#/F(Flash) Button P.38
7
ADJ. Button P.57
18
USB Terminal P.133
8
M Button P.59
P. 9 4
P. 1 0 6
19
AV Output Terminal P.47
9
D (Delete) /
T (Self-timer) Button
P. 4 9
P. 8 4
20
Speaker P.91
P. 9 3
10
DISP. Button P.27
21
Tripod Screw Hole
(underside)
-
11
Strap Eyelet P.10
14
About LCD Monitor Display
Screen Examples when Shooting Pictures
Note
The number of remaining shots available may differ from the actual number of shots, depending
on the subject.
Even between cards of the same capacity, the number of remaining shots and other values may
vary with the manufacturer, type, and shooting condition.
The continuous shooting (recording) time depends on the card type, capacity, and performance.
When the number of remaining shots is 10,000 or more, "9999" is displayed.
Item Name Refer to Item Name Refer to
1 Flash P.38 15 Color Depth P.67
2 Macro Shooting P.37 16 Auto Bracket P.68
3 Self-timer P.84 17 Zoom Bar P.36
4 Mode Types - 18 Interval P.72
5 Recording Destination P.19 19 Time Exposure P.71
6 Remaining Number of Still Images P.159 20 Histogram P.28
7 Picture Quality P.60 21 Battery P.16
8 Image Size P.60 22 Date/Time P.75
9 Focus P.62 23 Camera Shake P.30
10 White Balance P.77 24 Aperture Value P.32
11 Exposure Comp. P.76 25 Shutter Speed P.32
12 ISO Setting P.79 26 Remaining Recording Time P.159
13 Photometry P.65 27 Recording Time P.159
14 Sharpness P.66 28 Frame Rate P.90
123 4 5678
18
19
20
21
28
9
12
13
15
17
11
1010
1414
1616
2222
2323
2626
2727
24
25
Still Image Mode
Movie Mode
15
Quick Guide
The Screen During Playback
Note
The LCD monitor may display messages to inform you of operational instructions or the
cameras status while in use.
Item Name Refer to Item Name Refer to
1 Protect P.96 8 Picture Quality P.60
2 DPOF P.99 9 Image Size P.60
3 Mode Types - 10 File No. -
4 Playback Data Source P.42 11 Battery P.16
5 Number of Playback Files - 12 Date at Shooting P.75
P.11 7
6 Total Number of Files - 13 Recording Time or Lapsed Time -
7 Setting at Shooting (Recording) - 14 Indicator -
Still Image Mode
Movie Mode
14
13
12 3 4 5 6
7
8, 9
12
11
10
16
Getting Ready to Shoot
Turn the power on and get ready to shoot.
Note
If you have already used this camera, follow the steps below to
make sure it is turned off before removing or loading batteries.
1. Make sure the LCD monitor is turned off.
2. Make sure the lens cover is closed.
For how to turn the camera off, see P.24.
About the Batteries
The following batteries can be used in the camera. Please choose
which kind to use according to your needs.
Rechargeable Battery DB-50 (Included)
This is a lithium-ion battery. This is economical
because you can recharge it using the battery charger
and use it over and over again. They last a long time,
so they are convenient for travel.
AA Alkaline Batteries (LR6) (available in
stores)
You can obtain them anywhere, so they are
convenient for travel.
However, in a low-temperature environment the
number of shots you can take will decrease. Warm the
batteries before use. It is recommended that you use
the rechargeable battery when using the camera for a long time.
AA Nickel Batteries (available in stores)
These batteries are not rechargeable. However, they
last a long time as compared with AA Alkaline
Batteries when used with a digital camera.
17
Quick Guide
Nickel-Hydrogen Battery (available in stores)
This is economical because you can recharge and use
it over and over again. Use a charger (available in
stores) for charging.
The battery may be inert and consequently it may not supply power immediately after
it is purchased or left unused for more than a month. In such a case, recharge the
battery two or three times before use. The battery self-discharges with time even if
the camera is not used, so recharge it before use.
AA-size Oxyride (oxy nickel hydroxide) dry cell (available in stores)
This cell has a longer life than an AA-size alkaline dry cell.
In addition to the batteries, you can use the AC Adapter (P.155).
Batteries (Cells) Not Acceptable
The camera does not accept the following batteries (cells):
Manganese dry cell (R6), Ni-Cd battery, CR-V3
Note
Indication of the number of images you can take
Based on CIPA standard (Temperature: 23 degrees Celsius, LCD on, 30 seconds between
shots, changing the zoom setting from telephoto to wide or wide to telephoto for each shot,
50% flash usage, turning the power off after each 10 shots).
Number of shots of the AA Alkaline Batteries (LR6), it is using the AA Alkaline Batteries by
Matsushita Battery Industrial Co., Ltd.
If you set the camera to the Power-Save or Synchro-Monitor mode, the number of shots
you can take will increase.
The number of shots is for reference only. If the camera is used for long periods of time for
setting and playback, the shooting time (the number of shots) will decrease.
Reference
For how to insert the Rechargeable Battery , see P.21.
For how to use the AC Adapter, see P.155.
Battery Type Number of Shots
Rechargeable Battery (DB-50) Approx. 500
AA Alkaline Batteries (LR6) Approx. 200
18
Caution
Please remove the batteries if you are not going to use the camera for a long period of
time.
The life of an AA alkaline battery (LR6) depends on the brand and the storage time from the
date of production. In addition, the life of an alkaline battery becomes shorter at low
temperatures.
The Nickel-Hydrogen Battery is not factory-charged. Charge it before use.
Immediately after the purchase or after a long storage, the battery may not be charged fully.
Repeat charging and discharging before use. For details, see the documentation that came
with the battery or charger.
The battery may become very hot immediately after operation. Turn the camera off and
leave it to cool down sufficiently before removing the battery.
Battery level indication
A battery mark appears at the lower left of the LCD monitor to
indicate the battery level. Prepare new batteries before the batteries
wear out.
Caution
If you are using nickel metal hydride batteries, may not appear or or
may appear immediately depending on the battery type and environmental
conditions. Check the batteries at hand before use.
If you are using the AC Adapter, may appear. This does not indicate malfunction
and you can continue to use the camera.
Battery Mark Description
Sufficient battery charge
Low remaining charge: Prepare new batteries.
No remaining charge: Replace the batteries.
19
Quick Guide
About an SD Memory Card (available in stores)
You can store still images you have taken either in the camera's internal
memory or on an SD Memory Card (available in stores). The internal
memory capacity is 28 MB.
When you want to record a lot of still images, movies or sounds at
high resolutions, use a high-capacity SD Memory Card.
Note
Where images are recorded
When no SD memory card is inserted, the camera records images in the internal memory;
when an SD memory card is inserted, it records images on the memory card.
Caution
If an SD memory card is loaded, the camera will not record to the internal memory, even if
the card is full.
Take care not to get the metal parts of the card dirty.
Note
Write-protecting your images
If you move the card's write-protection switch to LOCK, your still images cannot
be accidentally erased and the memory card cannot be formatted. If you release
the protection (by returning the switch to its original position), it is once again
possible to erase images and format the card.
So it's a good idea to switch to LOCK when you have some important data recorded.
Note that you cannot shoot images in the LOCK state because no data can be
recorded on the card. Unlock the card when shooting.
Reference
For switching between the SD Memory Card and internal memory during playback, see P.42.
For recording capacities, see P.159.
When no memory card is loaded When an SD Memory Card is loaded
Records to internal memory Records to the SD memory card
20
Charging the Rechargeable Battery
The rechargeable battery needs to be charged before use.
1. Insert the battery, making sure that the and markings
on the battery match with those on the battery charger.
The battery label should face up.
Caution
Be careful not to reverse the and sides.
2. Plug the power cord into an outlet.
Charging starts and the charger lamp shows you the progress as shown
below. Once charging has finished, unplug the power cable from the
power outlet.
Depending on the battery level, the charging time differs:
Charger Lamp Description
Lit Charging started
Unlit Charging complete
Flashing Battery charger or battery may be faulty (Unplug the power cable from the
power outlet and remove the battery from the battery charger.)
21
Quick Guide
Loading the Rechargeable Battery and SD
Memory Card
The rechargeable battery (DB-50) is another option for powering this
camera. This battery is convenient because it can be used over and
over again by recharging, and the battery power lasts long.
If you have already used this camera, make sure it is turned off
before loading batteries.
1. Open the battery/card cover.
2. Make sure the card is facing the
right way and then push the
card all the way in until it clicks.
The rechargeable battery may be
inserted first.
3. Insert the rechargeable battery.
22
4. Close the battery/card cover and slide it back into place.
Caution
Please remove the rechargeable batteries if you are not going to use the camera for a long
period of time.
Store the removed battery in a dry cool place.
Use the battery charger (sold separately) to recharge the battery.
Reference
For how to format an SD memory card, see P.108.
Rechargeable battery charging time
DB-50 About three hours (25°C)
23
Quick Guide
Inserting Dry Cells (available in stores)
If you have already used this camera, make sure it is turned off
before loading batteries and memory card.
1. Open the battery/card cover.
2. Insert the two batteries, making
sure they are facing the correct
way.
3. Close the battery/card cover and slide it back into place.
24
Turning the Power On/Off
To turn the power on:
1. Slide the power switch to open
the lens cover.
After the start sound, the auto-focus/flash
lamp blink for several seconds.
Using the Camera in Playback Mode
If the Playback button is pressed with the lens cover closed, the power is
turn on in Playback Mode and the camera can be used in this mode.
To turn the power off:
1. Slide the power switch to close
the lens cover.
Caution
It takes longer from power-on until the camera becomes ready for shooting when the flash is
enabled than when it is disabled.
Note
Auto Power Off
If the camera goes unused for a set period of time, it will automatically turn itself off to save
power. To continue on using the camera, slide the power switch to close the lens cover once
(power-off) and slide it again to open (power-on).
Reference
For how to change the Auto Power Off setting, see P.112.
25
Quick Guide
Setting the language
When the power is turned on for the first time, the language setting
screen appears (for the LCD monitor display language). After setting
the language, go on to the date/time setting (for printing the date and
time on your photos).
You can shoot without these settings. However, be sure to set the
language, and the date/time later. Use the SETUP screen for these
settings.
Note
To display the SETUP screen, turn the mode dial to SETUP.
1. Turn the power on for the first time after purchase.
The language selection screen appears.
To skip language setting, press the MENU button.
When the MENU button is pressed, the language setting is cancelled and
the video signal format-setting screen appears.
2. Press the ! " #$ buttons to select a language.
3. Press the O button.
The display language is set, and the date/
time setting screen appears.
Reference
For how to set the display language and date/time on the SETUP screen, see "Changing the
Display Language (LANGUAGE)" and "Setting the Date and Time (DATE SETTINGS)" in this
guide.
26
Setting the date and time
When the power is turned on for the first time and the
language setting is completed, the date/time setting
screen appears.
1. Press the !"#$ buttons to set
the year, month, date and time.
Change the value with !" and move
the frame with #$.
2. In [FORMAT], choose the Date and
Time format.
Select the format with !".
3. Check the display on the bottom of
the screen and then press the O
button.
The date is set.
Note
If the batteries are removed for more than one week, the date and time settings will be lost.
These settings must be made again. Any other changes you made with the Setup mode and
Shooting setup menu will also be reset.
Reference
For how to correct the date and time, see P.117.
For how to put a date stamp on each frame, see P.75.
Setting at shipping
27
Quick Guide
Changing the Display
If you press DISP., you can change the screen display mode, such
as switching between display/no display of symbols, etc.
Every time you press the DISP. button, the view cycles in the order
of Histogram On, Grid Guide, No Display, LCD Monitor Off, and
Normal Symbol Display.
Maximizing the LCD Monitor Brightness
Hold the DISP. button down to maximize the display brightness.
When the brightness is maximal, holding the DISP. button down returns the
brightness to the level set in [LCD BRIGHTNESS] (P.110).
Term
Grid Guide
Displays auxiliary lines on the LCD monitor to help shooting. These lines are not recorded
with images.
Synchro-Monitor Mode
Keeps the LCD monitor off except when the camera is operated. This mode is effective for
saving power consumption. With this mode, half-pressing the shutter release button turns the
LCD monitor on. Subsequently, full-pressing the shutter release button displays the shot
image on the LCD monitor, and then turns the LCD monitor off.
Normal Symbol Display
No Display
Histogram On
Grid Guide
LCD Monitor Off
(Synchro-Monitor Mode)
Switches screens with the
DISP button
28
Histogram Display
When histogram display is on, a histogram
appears in the lower right corner on the LCD
monitor screen.
A histogram is a graph indicating the number
of pixels on the vertical axis and the
brightness on the horizontal axis. The
brightness is shadow (dark), halftone, and
highlight (light) from the left.
By using the histogram, you can judge the brightness of an image without
being affected by the brightness around the LCD monitor. This also helps
preventing voids and solids.
If the histogram has only peaks on the right
side without anything else, this picture is
over-exposed with too many pixels only for
highlight sections.
If the histogram has only peaks on the left
side without anything else, this picture is
under-exposed with too many pixels only for
shadow sections.
Correct the exposure to an appropriate level.
Note
The histogram displayed on the LCD monitor is for reference only. Depending on the shooting
condition (flashing is required, the surrounding light is dark, and so on), the exposure level
indicated in the histogram may not correspond to the brightness of the shot image.
Exposure compensation has its limitation. It does not necessarily achieve the best possible result.
The histogram having peaks in the center part does not necessarily provide the best result
to suit your particular requirements.
For example, an adjustment is required if you want to intentionally achieve under or over
exposure.
Reference
For details about exposure correction, see P.76.
29
Quick Guide
Basic Shooting
Now you are ready. Let's shoot!
How to Hold the Camera
Hold the camera as illustrated below for best results.
1. Hold the camera with both hands
and lightly press both elbows
against your body.
2. Put your finger on the shutter
button.
Note
Be careful when you are shooting not to get a finger, your hair, or the strap in front of the lens
or the flash.
30
Preventing camera shake
If the camera moves when you press the shutter button, the still
image might not come out clearly (due to camera shake). The
mark displayed on the LCD monitor indicates that camera shake
should be avoided under the current shooting condition.
To prevent camera shake, use a tripod or hold the camera securely
with both hands when you shoot.
Note that camera shake tends to occur in the following cases:
When shooting in a dark place without using the flash
When shooting in Slow Sync Mode (P.38)
When using the Zoom function
If the camera shake mark ( ) is displayed, try the following:
Using the flash (Set the camera to Forced Flash Mode) (P.38).
Raising the ISO sensitivity (P.79).
Using the self-timer (P.84).
31
Quick Guide
Capturing the Moment Shooting
(Full-press)
The shutter release button works in two steps.
There are two methods of using the shutter button; pressing the
shutter button all the way down at once (full-press) and pressing it
halfway (half-press).
Full-press the shutter release button for quick focusing not to miss
a shooting opportunity.
1. To turn the power on, slide the power switch to open the
lens cover.
For how to turn the power on, see P.24.
2. Switch the Mode Selector to 5.
3. Put the subject of your photo right
in the middle of the LCD monitor
and press the shutter release
button half-way.
4. Put the subject of your photo right
in the middle and press the
shutter release button fully.
Note
The still image you have taken freezes for a moment on the LCD Monitor and is recorded.
(P.115)
Full-press is apt to cause camera shake. Hold the camera firmly with both hands and shoot.
32
Checking the Focus and Shooting
(Half-press)
When you press the shutter release button halfway (half-press),
the autofocus function is triggered to determine the focal distance.
Subsequently press it all the way down (full-press) to shoot.
This is useful when the subject is not in the middle (see P.34).
1. To turn the power on, slide the power switch to open the
lens cover.
For how to turn the power on, see P.24.
2. Switch the Mode Selector to 5.
3. Compose your shot by looking at
the LCD Monitor.
4. Since the focus is adjusted at the
center of the screen, position the
subject at the center of the screen
and half-press the shutter.
Once focused, the exposure and white
balance are fixed.
If the automatic focusing fails, the frame in
the center of the LCD monitor turn red and
the auto-focus/flash lamp in the upper
right of the LCD Monitor blinks in green.
.
Frame color Auto Focus/Flash Lamp
Before focusing White Off
Focused Green On (green)
Focusing failure Blink (red) Blink (green)
Auto Focus/Flash Lamp
Frame
33
Quick Guide
A frame of green is displayed at the focus
position.
In some cases, several frames may
appear.
Reference
When specifying a focus position at macro shooting, use the AF target shift function. (P.83)
5. Gently press the shutter button all
the way.
The still image you have taken freezes
for a moment on the LCD Monitor and is
recorded.
Note
Press gently to prevent camera shake when you press the shutter release button.
The mark indicates that blurring may occur. Hold the camera still and focus the
camera again.
When shooting in a dark place, the camera raises the focusing performance (auto focus
precision) by preliminary flashing immediately before shooting. This preliminary flashing is
skipped for shooting in no-flash mode.
When the [LCD CONFIRM] is set to OFF in the setup screen, the still image shot will not be
displayed on the LCD monitor.
Reference
For how to change the image confirmation time, see P.115.
34
When the Subject is not Centered
(Shooting with Focus-lock)
When your subject is not in the center of your
composition, compose your photo after focusing. (Focus-
lock)
Example: Taking a photograph of the castle in the background with the camera
focused on a person in front.
1. To turn the power on, slide the power switch to open the
lens cover.
For how to turn the power on, see P.24.
2. Switch the Mode Selector to 5.
3. Put the subject of your photo right in the center of the LCD
Monitor or the Viewfinder and press the shutter button half-
way.
Shooting range Subject to be focused on
Final still image
35
Quick Guide
4. With the shutter half-pressed,
move the camera and compose
your shot.
5. Gently press the shutter button all
the way.
Note
At macro shooting, the AF target shift function allows you to lock the focus without moving the
camera. This function is useful when a tripod is used.
Reference
For details about macro shooting, see P.37.
For details about the AF target shift function, see P.83.
36
Using the Zoom Function
If you use the Z (Wide angle)/ z (Telephoto) button, you
can alter the size of the subject in your photo without
having to change your distance from it.
By pressing the Z button, the field in the LCD monitor
and the viewfinder becomes wider. By pressing the z
button, the subject you see in the LCD monitor and the
viewfinder becomes larger.
1. With the camera ready to shoot,
press the Z button or the z
button.
You can check the Zoom status on the
Zoom Bar of the LCD monitor.
2. Compose your picture and half-
press the shutter release button.
3. Press the shutter release button
all the way.
Note
Using the Digital Zoom
Digital zooming enables you to enlarge the subject more than the maximum magnification
(x4.8) that can be specified by pressing the z (Telephoto) button (up to x3.6).
For digital zooming, release the z button once when the zoom reaches the limit on the z
(Tele) end on the Zoom Bar, and then hold the button down again.
Wide angle Telephoto
37
Quick Guide
Shooting Close-Ups (Macro-Mode)
Using the N (Macro) button
allows you to take a tight close-up
(Macro Photo).
It is good for shooting small
subjects because you can get up
to one centimeter (1/2 inch) away.
1. With the camera ready to shoot,
press the N button.
N is displayed momentarily in a large
size at the center of the LCD monitor
and then at the upper part.
2. Compose your picture and half-
press the shutter release button.
3. Press the shutter release button
all the way.
To get out of Macro Mode, press the :N
button again.
Note
When using the zoom, you can shoot close-ups within the following distances from the front
of the lens:
In Wide-Angle (W): About 1 cm from the front of the lens
In Telephoto (T): About 13 cm from the front of the lens
During Macro Shooting, the Viewfinder cannot be used. Use the LCD Monitor.
The AF target shift function enables you to lock the focus for macro shooting only by button
operation without moving the camera. This function is useful for shooting on a tripod. (P.83)
38
Using the Flash
Press the F (Flash) button to switch between flash
modes. By default, your camera is set to Flash Off.
From the front edge of the lens, flashlight reaches about
0.2 to 2.7 m (W) or about 0.13 to 2.1 m (T) when ISO
sensitivity is set to AUTO.
Flash Modes
1. Switch the Mode Selector to 5.
2. Press the F (Flash) button to switch between flash modes.
The Flash mode mark appears momentarily in a large size at the center of
the LCD monitor and then is displayed at the upper left.
During flash charging, the flash lamp keeps blinking. Once the flash is
charged, the lamp goes off and it is possible to shoot.
Note
The settings are saved until you press the
F
(Flash) button to change them.
When shooting movies or in Multi-Shot mode, the flash turns off.
When shooting in a dark place, the camera raises the focusing performance (auto focus
precision) by preliminary flashing immediately before shooting. This preliminary flashing is
skipped for shooting in no-flash mode.
If you are using a battery other than a lithium ion type, the LCD Monitor is turned off during
flash charging.
Flash Off The flash will not fire.
Auto When your subject is poorly lit or backlit, the flash fires automatically.
Red-eye reduction Reduces the red-eye phenomenon, in which people's eyes appear red
when shooting images of people.
Forced Flash The flash fires, whatever the light conditions are, when you shoot.
Slow Synchro
The flash fires with the shutter speed slowed. This is suitable when taking
portrait pictures in a nightscape. It is recommended to use a tripod.
39
Quick Guide
Shooting with Scenery-Matching
If you use the Scene Mode, you can select from among
six types of still image modes and shoot automatically
with optimal settings for that kind of scene.
1. Switch the Mode Selector to 5.
2. Press the ! button.
The still image mode selection screen
appears.
3. Press the " button to move to the
SCENE menu.
4. Press the #$ buttons to move the
orange rectangle to the mode you
want to select.
PORTRAIT Use when taking portrait pictures.
SPORT Use when taking pictures of moving objects.
LANDSCAPE Use when you are taking scenery pictures with abundant greens or
blue sky.
NIGHTSCAPE Use when shooting night scenes.
You can also shoot with persons in the frame.
TEXT MODE Use when capturing text images, for example, notes written on the
whiteboard at a meeting.
HIGH SENSITIVITY Use when taking pictures in dimly lit places. Also, LCD monitor
becomes brighter.
40
5. Press the O button.
The Mode's symbol is displayed on the
upper part of the LCD monitor.
6. Press the shutter release button.
If you press the ! button, the still image mode selection screen appears
and you can change the mode.
To return to ordinary shooting mode, on the still image mode selection
screen, press the ! button to select [NRML SHT], and then press the O
button.
Note
In Nightscape Mode, the flash works when all of the following conditions are satisfied:
The flash is set to Auto.
Flash is judged to be necessary because it is dark around.
There is a figure or any other object nearby.
Reference
For how to change PIC QUALITY/SIZE, see P.60.
For how to change to density in TEXT Mode, see P.82.
For the list of Shooting Setting menu items in Scene Mode, see P.157.
For combination of Scene Mode and the functions, see P.156.
41
Quick Guide
Playing Back
Checking the image you just took
(Quick Review)
You can view the image you just took on the LCD monitor. If you
are not pleased with the way the photo came out, you can erase it
then and there.
1. While still in the Still Image Mode,
press the Q (Quick Review) button.
The last image you took is displayed on the
LCD monitor.
Note
Once the power is turned off, the image you took cannot be displayed in the still image
mode even if you press the Q button.
If you use Quick Review to view the image taken in Text mode (see P.39), the displayed
image may have slightly lower quality than the recorded one.
In Quick Review
Q Button Returns to Shooting Mode.
8 Button Enlarges the displayed still image. You can move around on the displayed
image by pressing the !"#$ buttons.
9 Button Reduces the displayed still image enlarged by pressing the 8 button.
O Button Displays the still image at the maximum available ratio by pressing the 8
button.
When displayed for the maximum size, it returns to a whole display.
D Button Deletes the currently displayed file. When the D button is pressed, a warning
message about deleting the file appears. Select [DELETE] and press the O
button.
42
Viewing Your Images
In the Playback Mode you can check still images you
have taken. You can also delete or zoom in on them.
1. Press the Playback button.
The camera switches to Playback mode
and the last still image you took is
displayed.
You can view your pictures in order by
using the #$ button.
To switch the camera from playback mode
to still image mode (or movie or voice
memo mode), press the Playback button again.
Note
About power-on in playback mode
When you press the Playback button while the camera is turned off (the lens cover is closed),
the camera is turned on in playback mode with the lens cover still closed.
In this status, you can playback still images or make settings in the Setup Menu, while
shooting is not possible.
Where images are played back from
When no SD memory card is inserted, the camera plays back from the internal memory.
When an SD memory card is inserted, it plays back from the SD memory card.
Reference
For how to playback movies, see P.91.
For how to playback sounds, see P.93.
For how to playback still images with voice memo, see P.74.
To Previous
To Next
43
Quick Guide
Playing back in the three-frame view
A playback view can be divided into three frames. The
three-frame view allows you to select a still image to
enlarge or delete it.
1. Press the Playback button.
The last image you took is displayed.
2. Press the 9 (Thumbnail Display)
button.
The screen changes to the three-frame
view. The large frame at the center
displays the still image now selected.
A file shot in Text Mode appears
surrounded by the blue rectangle.
To switch to single-picture display:
1. Press the #$ buttons to select a still image.
2. Press the 8 (Enlarge) button or the O button.
44
About Screen Switching at Playback
The playback screen changes as follows:
Note
If one of the following operations is performed on the three-frame view, the display returns to
the ordinary playback screen (single-picture display) and the operation is executed.
Deletion (P.49)
Menu display (P.94)
Movie playback (P.91)
Sound playback (P.93)
Reference
For how to erase unwanted Images, see P.49.
45
Quick Guide
Thumbnail Display
You can view your images in sets of 12.
You can then select an image to erase or magnify.
1. Press the Playback button.
The last image you took is displayed.
2.
Press the
9
(Thumbnail Display)
button.
The screen changes to three-frame
view.
3.
Press the
9
(Thumbnail Display)
button.
The screen is divided into 12 frames and
displays 12 still images at once.
To display just one photo
1. Use the !"#$ buttons to select an image.
2. Press the 8 (Enlarge) button twice, or press the O button.
Reference
For how to erase the selected image, see P.49.
For how to switch to the three-frame view, see P.43.
Selected still image
46
Magnifying Images
You can enlarge a still image displayed on the LCD
Monitor.
An image can be enlarged up to 8 times when its size is
2560x1920 or 2048x1356, up to 6.7 times when its size is
1280x960, and up to 3.4 times when its size is 640x480.
1. Press the Playback button.
The last image you took is displayed.
2. Press the #$ buttons to display the still image you want to
enlarge.
3. Press the 8 (Enlarged View)
button.
The still image is enlarged.
In Enlarged View
8 Button Enlarges the displayed still image. You can move around on the displayed
image by pressing the !"#$ buttons.
9 Button Reduces the displayed still image enlarged by pressing the 8 button.
O Button Displays the still image at the maximum available ratio or returns it to its
original size.
47
Quick Guide
Viewing on a Television
You can view still images you have taken on a TV screen. The
camera displays everything on the TV screen just as it would on the
LCD Monitor.
To use your television for viewing, connect your camera to the
television with the AV cable that came with your camera.
To view still images on a television, follow the steps below.
1. Securely connect the AV cable to
the Video In terminal on the
television.
Connect the white plug of the AV cable
to the audio input terminal (white) of the
TV unit and the yellow plug to the video
input terminal (yellow).
2. Make sure the camera power is off.
3. Securely connect the AV cable to
the Video Out terminal.
4. Set the television to "Video" mode. (Set the input to
"Video".)
For details, see the documentation that
came with the television.
Audio input terminal (white)
Video input terminal (yellow)
48
5. To turn the power on, slide the
power switch to open the lens
cover or press the Playback
button.
Connecting the AV cable to the camera
turns off the LCD monitor display and
the speaker output.
Note
If you connect the AV cable to your video recorder's In terminal, you can record what you
have shot onto video.
Your camera is set to NTSC playback format (used in Japan and other countries) for use
with television equipment, etc. If the equipment you want to connect to uses PAL format
(used in Europe and else-where), then switch your camera to PAL format in the Setup
Menu before connecting.
Reference
For how to change the video out mode, see P.119.
49
Quick Guide
Erasing
Erasing Unwanted Images
You can erase unwanted images from the internal memory or SD
Memory Card.
You can erase them in the following three ways:
•One file at a time
•Deleting all frames at once
•Select multiple frames and erase together
1. Press the Playback button.
2. To erase images one at a time,
press the #$ buttons to display
the image you want to erase.
3. Press the D (Delete) button.
4. Press the !" buttons to select
[DELETE ONE] or [DELETE ALL].
If you selected [DELETE ONE], you can
also change the image for deletion with
the #$ buttons.
5. Press the O button.
If you selected [DELETE ONE]:
The display indicates deletion is in progress; once finished, it returns
to the screen in step 4.
If you selected [DELETE ALL]:
You will be prompted to confirm that you want to erase; if so, press
the $ button to select [Yes], and then press the O button.
Note
In the three-frame view (see P.43), you can display a still image at the center and press the
D (Delete) button to delete it.
50
Erasing Multiple Frames at One Time
1.
Press the Playback button.
2. Press the 9 (Thumbnail) button
twice.
The screen is divided into 12 frames and
displays 12 still images at once.
3. Press the !"#$ buttons to select
the image you want to erase and
press the D (Delete) button.
The trash symbol is displayed in the
upper left corner of the image.
4. Repeat Step 3. to select all the still images you wish to
erase.
If you selected an image by mistake, you can deselect it by selecting the
image and pressing the D (Delete) button again.
5. Press the O button.
6. Press the $ button to select [YES]
and then press the O button.
The display indicates deletion is in
progress; once finished, the Thumbnail
Display screen returns.
Chapter 2
A Variety of Shooting
Techniques/Playback
Direct Printing .................................................. 52
A Variety of Shooting Techniques ................. 57
Shooting with Multi-Shot ................................ 85
Shooting/Playing Back Movies....................... 89
Recording/Playing Back Sound ..................... 92
Other Functions Available in Playback Mode.........94
52
Direct Printing
Direct Print Function
The Direct Print standard enables direct printing from a camera to a printer, by
connecting them via a USB cable. Photos can be printed quickly and easily
from your digital camera without using a computer.
Caution
You cannot print movies (.AVI) with this function. For still images with sounds (.JPG and
.WAV), only the still images (.JPG) are printed.
Some printer does not support images taken in Text mode (TIFF). Even when TIFF images
are printed, their printed contents cannot be guaranteed.
Note
This camera uses PictBridge, an industry standard for Direct Printing.
Your printer must comply with the PictBridge to use the Direct Print function. For support
information, see the documentation that came with the printer.
For direct printing on a printer supporting both Direct Print and PictBridge, select [Original]
for [USB Connection].
Connecting the Camera to a Printer
Connect your camera to a printer using the USB cable provided.
1. Make sure the camera power is off.
2. Make sure the printer power is off.
Load paper into the printer and check that the printer is ready to print.
3. Connect one end of the USB cable provided to the USB port
of your printer.
4. Connect the other end of the USB cable to the USB terminal
on your camera.
5. Turn the printer power on.
53
A Variety of Shooting Techniques/Playback
Note
To disconnect the camera from the printer, check that the power is off on both units before
disconnecting the USB cable between them.
Printing Still Images
You can send still images from the camera to a PictBridge
compatible printer to print them.
Still images are sent from the internal memory when no SD memory
card is loaded or from an SD memory card when one is loaded.
Caution
Do not disconnect the USB cable during printing.
Note
If a printer error message appears during transmission, check the condition of the printer, and
take the appropriate action.
Printing One or All Still Images
1. Check that the printer is ready for printing.
The "Connecting" screen appears.
2. Press the ADJ. button.
When the connection between the printer
and the camera is established, the Direct
Print playback mode screen appears.
3. Press the #$ buttons to select an
image for printing.
4. Press the ADJ. button.
54
5. Press the !" button to select [1
FILE] or [ALL FILES].
6. Press the O button.
The Direct Print menu appears.
7. Press the !" buttons to select an
item, and then press the $ button
to display the detailed options
screen.
If there are no options available for an
item, the detailed options screen does not
appear even if you press the $ button.
Also, items that are not available on the
printer do not appear.
The following items can be selected. Each item is displayed only when
supported by the printer.
8. Press the !" buttons to select the detailed item, and then
press the O button.
The display returns to the Direct Print menu.
9.
Repeat steps 7 and 8 to change the settings as required.
Item Name Function
PAPER SIZE Sets the paper size.
PAPER TYPE Sets the paper type.
LAYOUT Sets the number of images printed on a sheet of paper.
DATE PRINT Selects whether to print the date (shooting date). The date format can be set using
the date/time option in the 1 Mode.
FILE NAME PRINT Selects whether to print the file name.
OPTIMIZE IMAGE Selects whether to optimize the image data (still image) prior to printing on the printer.
FIXED-SIZE PRINT Setting the print image size.
PRINT QUALITY Setting the print quality.
FORMS PRINT Printing forms.
55
A Variety of Shooting Techniques/Playback
Note
To specify the set value as the default selected at the
next connection, click the ADJ. button on the screen of
Step 7. Upon appearance of the screen at right, select
[Set] and press the O button.
Select [Cancel] to return to the default setting.
10.Press the O button.
The selected still images are sent to the printer and the "Connecting" screen
appears.
Press the M button to cancel the operation.
At the end of transmission, the display returns to the Direct Print playback mode
screen and printing starts.
Printing Several Still Images
1. Check that the printer is ready for printing.
The "Connecting" screen appears.
2. Press the ADJ. button.
When the connection between the
printer and the camera is established,
the Direct Print playback mode screen
appears.
3. Press the 9 (Thumbnail) button
twice.
The screen is divided into 12 frames and displays 12 still images at once.
4. Press the !"#$ buttons to select an image for printing.
5. Press the O button.
6. Press the !" buttons to set the
number of copies to print.
Press the ! button to increase the
number, or the " button to decrease it.
7. Press the #$ buttons to select an
image for printing.
56
8. Press the !" buttons to set the number of copies to print.
9. Repeat steps 7 and 8 to select all the still images to be
printed and the number of copies for each.
10.Press the M button.
The Direct Print menu appears.
11.Press the !" buttons to select an
item, and then press the $ button
to display the detailed options
screen.
If there are no options available for an
item, the detailed options screen does not
appear even if you press the $ button.
Also, items that are not available on the
printer do not appear.
For settings available, see P.54.
12.Press the !" buttons to select the detailed item, and then
press the O button.
The display returns to the Direct Print menu.
13.
Repeat steps 11 and 12 to change the settings as required.
14. Press the O button.
The selected still images are sent to the printer and the "Connecting"
screen appears.
Press the M button to cancel the operation.
When all the selected still images have been sent from the camera to the
printer, the camera display returns to the Direct Print playback mode
screen.
Note
Only images with a printer mark ( ) are printed. When you cancel printing and then try to
print again, make sure that the printer mark is on the images you want to print.
The same still image can also be printed several times on a single sheet.
The items available vary depending on the functions of the printer.
To print images using the printer's default settings, select Printer Setting on the detailed
options screen.
57
A Variety of Shooting Techniques/Playback
A Variety of Shooting Techniques
Using the ADJ. (Adjust) Button
The ADJ button allows exposure correction, white balancing, and
ISO sensitivity setting by fewer operations. You can also register a
function other than these adjustment functions to the ADJ button. If a
frequently used function is registered, they can be set easily by
fewer button operations.
Adjustments Using the ADJ. Button
Adjustments that can be made with the ADJ. button differ between SCENE
mode and Movie mode.
Reference
Exposure Comp, see P.76.
White Balance, see P.77.
ISO Setting, see P.79.
Text Density, see P.82.
For how to set a function to the ADJ. button, see P.111.
Still Image Mode Exposure control, white balance, ISO sensitivity
Movie Mode White Balance
Scene Mode (Text Mode) Density
Scene Mode (other than Text Mode) Exposure control, white balance
Use the SETUP menu to register a function to the ADJ button (P.111).
58
Shooting Setting Menu
The Shooting Setting menu enables you to shoot pictures by setting the items
listed in the table below.
*Among the choices listed in the table below, default values at purchase are enclosed in [ ].
Note
The SETUP menu can be accessed from within the Shooting Setting menu. For details, see
P.106.
Reference
For the list of Shooting Setting menu items in Movie and Scene Modes, see P.157.
Setting Option Refer to
PIC QUALITY/SIZE F2560, N2560, F2048, N2048, F1280,[N1280], N640 P.60
FOCUS [AF], MF, SNAP, P.6 2
PHOTOMETRY [MULTI], CENTER, SPOT P.65
SHARPNESS SHARP, [NORMAL], SOFT P.66
CONT. MODE [OFF], CONT, SCONT, MCONT P.85
COLOR DEPTH VIVID, [NORMAL], NEUTRAL, B&W P.67
AUTO BRACKET [OFF], ON, WB-BKT P.68
TIME EXPOSURE [OFF], 1, 2, 4, 8 seconds P.71
INTERVAL [0 s], 5 seconds to 3 hours P.72
IMAGE WITH SOUND [OFF], ON P.74
DATE IMPRINT [OFF], DATE, TIME P.75
EXPOSURE COMP. -2.0 to +2.0 P.76
WHITE BALANCE
[AUTO], (Daylight), (Overcast), (Tungsten light),
(Tungsten light 2), (Fluorescent light), (One Push)
P.7 7
ISO SETTING [AUTO], ISO64, ISO100, ISO200, ISO400, ISO800 P.79
SLOW SHUTTER LMT [OFF], ON P.80
RESTORE DEFAULTS P.81
59
A Variety of Shooting Techniques/Playback
Using the Shooting Setting Menu
1.
With the camera ready to shoot, press the M button.
The Shooting Setting menu appears.
2. Press the !" buttons to select the desired item.
The setting items are provided on 4 screens.
To select a screen by screen number:
1. Press the # button to select a screen number on
the left of the screen.
2. With the screen number selectable, press the
!"
buttons to switch between screens.
3. After selecting the screen, press the
$ button to
return to the setting item selection step.
3. After selecting a setting item, press the O or $ button.
Choices for the setting item are displayed.
4. Press the !" buttons to select a choice.
5. Press the O or # button.
6. If you pressed the # button in step 5, press also the M
button.
The Shooting Setting menu disappears and the camera becomes ready
for shooting.
When the " button is pressed at the
bottom item, the next screen
appears.
60
Choosing Picture Quality Mode/Image Size
(PIC QUALITY/SIZE)
The size of a stored still image and movie file depends on picture
quality and size settings.
In Picture Quality Mode, there are two types, N (Normal) and F
(Fine).
Combining Picture Quality Mode and Image Size.
Figures inside the bold frame indicate those shown on the screen.
In Movie Mode, 320 X 240 or 160 X 120 can be selected.
Reference
For internal memory/SD memory card recording capacities, see P.159.
Types of Modes You Can Select
Symbol Mode Description
Normal Mode The compression ratio is high, resulting in a small file. Normally,
shooting is done in this mode.
Fine Mode The compression ratio is low, resulting in a large file, but the picture
quality is better than in Normal Mode.
Size
2560 X 1920 2048 X 1536 1280 X 960 640 X 480
Mode F (Fine) F2560 F2048 F1280 -
N (Normal) N2560 N2048 N1280 N640
Uses Suitable for
downloading
images to your
computer and
correcting the
images or
printing them in
large sizes.
Suitable for
printing images
in large sizes.
Suitable for
shooting many
pictures.
Capable of recording
the greatest number of
pictures on a single
SD memory card.
Suitable for attaching
images to e-mail
messages or using
them on Web pages.
61
A Variety of Shooting Techniques/Playback
1. Switch the Mode Selector to 5.
2. Press the M button.
The Shooting Setting menu appears.
3. Press the " button to select [PIC QUALITY/SIZE] and press
the O or $ button.
4. Press the !" buttons to select a
picture quality/size.
5. Press the O or $ button.
Picture Quality/Image Size settings are
completed.
6. If you pressed the # button in step
5, press also the M button.
The shooting setting menu disappears
and the LCD monitor displays the set
values.
This setting will be used for shooting
until you change it.
Still Image Mode
Movie Mode
62
Manual Focus Shooting (FOCUS)
When Auto-Focus does not focus as desired, you can focus
manually (Manual Focus).
Manual focusing allows shooting at a fixed distance. When using a
fixed shooting distance, it can be set to either Snapshot or Infinity
().
Note
Manual focus cannot be used in Scene Mode.
Manual focusing can focus the camera also on an object that requires macro shooting.
In manual focus, the Macro Mode cannot be used.
Setting Manual Focusing
1. Switch the Mode Selector to 5.
2. Press the M button.
The Shooting Setting menu appears.
3. Press the " button to select [FOCUS] and press the O or
$ button.
4. Press the !" buttons to select
[MF].
5. Press the O or # button.
Focus settings are complete.
6. If you pressed the # button in
step 5, press also the M
button.
The Menu closes and "MF" is displayed
on the screen.
63
A Variety of Shooting Techniques/Playback
Shooting with Manual Focusing
1. Press the " button as required.
Pressing the " button enlarges the
display for easy focusing.
2. Press the O button to set the
focus bar/zoom bar display to the
focus bar.
Each time the O button is pressed, the
focus bar and the zoom bar appear
alternately.
3. Press the z and Z buttons for focusing.
Pressing z button moves the focus away from you.
Pressing the Z button brings the focus closer to you.
Until the setting is changed the next time, pictures are shot by manual
focusing.
4. Press the shutter button for shooting.
Note
When the zoom bar is displayed, you can operate the zoom bar with the zZ buttons.
At interval shooting, the O button cannot be used to operate zooming or switch to
manual focusing.
64
Shooting at a Fixed Distance
The shooting distance can be set to short distance or infinity.
Infinity is useful to shoot a distant view.
To shoot with the shooting distance fixed, follow the steps below.
1. Switch the Mode Selector to 5.
2. Press the M button.
The Shooting Setting menu appears.
3. Press the " button to select [FOCUS] and press the O or
$ button.
4. Press the !" buttons to select
[SNAP] or [] (Infinity).
Selecting [SNAP] will fix the shooting
distance to 2.5 meters.
Selecting [] will fix the shooting distance
to infinity.
5. Press the O or # button.
Focus settings are complete.
6. If you pressed the # button in step 5, press also the M
button.
The Shooting Setting menu closes and the setting value appears on the
screen.
This setting will be used for shooting until you change it.
65
A Variety of Shooting Techniques/Playback
Changing the Light Metering (PHOTOMETRY)
You can change the metering method (the range to use for metering) to
determine the exposure value.
There are three Light Metering Methods available: MULTI, CENTER, and
SPOT.
1. Switch the Mode Selector to 5.
2. Press the M button.
The Shooting Setting menu appears.
3. Press the " button to select [PHOTOMETRY] and press the
O or $ button.
4. Press the !" buttons to select
the desired setting.
5. Press the O or # button.
Light Metering Method setting is
complete.
6. If you pressed the # button in
step 5, press also the M
button.
The shooting setting menu disappears
and the LCD monitor displays the set
values.
This setting will be used for shooting
until you change it.
Types of Modes You Can Select
Symbol Mode Description
(No Symbol) MULTI The entire shooting range is divided into 256 partitions, and subjected to
photometry for overall decision.
CENTER The light metering is determined by a measurement of the whole, with
the central part emphasized.
Use this when the brightness of the center and surroundings are
different.
SPOT Light metering is determined by measuring only the central part.
Use this setting when you want to use the brightness of the center. It is
useful if there is marked difference in contrast or backlighting.
66
Changing the Edge Quality of Still Images
(SHARPNESS)
You can change the definition of your still images to either sharp or
soft.
1. Switch the Mode Selector to 5.
2. Press the M button.
The Shooting Setting menu appears.
3. Press the " button to select [SHARPNESS] and press the
O or $ button.
4. Press the !" buttons to select
the desired setting.
5. Press the O or # button.
Sharpness settings are complete.
6. If you pressed the # button in
step 5, press also the M
button.
The shooting setting menu disappears
and the LCD monitor displays the set
values.
This setting will be used for shooting until
you change it.
67
A Variety of Shooting Techniques/Playback
Setting Color Depth (COLOR DEPTH)
Color depth of the shot still image can be selected from Normal,
Natural, Neutral, and B&W.
1. Switch the Mode Selector to 5.
2. Press the M button.
The environment setting menu is displayed.
3. Press the " button to select [COLOR DEPTH]. Then press
the O or $ button.
4. Press the !" buttons to select the color depth.
5. Press the O or # button.
This completes the color depth setting.
6. If the # button was pressed in
Step 5, press the M button.
The shooting setting menu disappears. If
other than [Normal] is set, the LCD monitor
displays the set values.
The set values are used for shooting until
they are changed the next time. The LCD
monitor also reflects the values.
68
Shooting Consecutively with Different
Exposures (AUTO BRACKET)
The Auto Bracketing function automatically shoots three consecutive shots,
with the specified exposure value as standard, at three exposure levels, at
-0.5EV, ±0, and +0.5EV.
Note
This function is not available when shooting with sound.
1. Switch the Mode Selector to 5.
2. Press the M button.
The Shooting Setting menu appears.
3. Press the " button to select [AUTO BRACKET] and press
the O or $ button.
4. Select [ON] and then press the O
or # button.
5. If you pressed the # button in
step 4, press also the M
button.
The shooting setting menu disappears
and the LCD monitor displays [AB].
6. Press the shutter release button.
Three consecutive shots are taken, with
the specified Exposure Compensation
value as the standard, at -0.5EV, ±0, and
+0.5EV.
After shooting, three still images are
displayed on the LCD Monitor. They are,
from the left, at -0.5EV (darker), standard
compensation, and +0.5EV (brighter).
This setting will be used for shooting until you change it or you turn the
power off.
Reference
For how to change the Exposure Compensation, see P.76.
For how to change the White Balance, see P.77.
69
A Variety of Shooting Techniques/Playback
Shooting Consecutively with Different White
Balance (WHITE BALANCE BRACKET)
Three images are automatically recorded - a reddish image, a bluish
image, and an image of the current white balance.
This is useful if the appropriate white balance cannot be judged.
1. Switch the Mode Selector to 5.
2. Press the M button.
The Shooting Setting menu appears.
3. Press the " button to select [AUTO BRACKET] and press
the O or $ button.
4. Press the !" buttons to select
[WB-BKT].
5. Press the O or # button.
White Balance Bracket settings are
complete.
6. If you pressed the # button in step
5, press also the M button.
The Shooting Setting menu disappears
and the screen displays [WB-BKT].
7. Press the shutter release button.
Three images (reddish, bluish, and equal
to the current white balance) are
automatically recorded.
This setting will be used for shooting until
you change it or you turn the power off.
70
Note
This function is not available for Multi-Shot shooting (P.85) and Auto Bracket shooting
(P.68).
The flash cannot be used.
Time Exposure (P.71) is set to OFF.
If [B&W] is set for [COLOR DEPTH], the white balance bracket can be set but does not
become valid.
Reference
For how to change the White Balance, see P.77.
71
A Variety of Shooting Techniques/Playback
Using Long Time Exposure (TIME EXPOSURE)
You can select an exposure time of 1, 2, 4 or 8 seconds.
By using long time exposure, you can capture the track of moving
subjects such as fireworks and car lights, when you shoot a night
scene.
1. Switch the Mode Selector to 5.
2. Press the M button.
The Shooting Setting menu appears.
3. Press the " button to select [TIME EXPOSURE] and press
the O or $ button.
4. Press the !" buttons to select
the exposure time.
5. Press the O or # button.
This completes the setting of time
exposure.
6. If you pressed the # button in
step 5, press also the M
button.
The shooting setting menu disappears
and the LCD monitor displays the set
values.
This setting will be used for shooting until
you change it.
Note
When using long time exposure, the shutter speed may go down and images may be
blurred. Hold the camera securely by both hands or use a tripod for shooting.
While shooting with long time exposure, the LCD Monitor display turns off.
72
Shooting Pictures Automatically at Set
Intervals (INTERVAL)
You can set the camera to automatically take pictures at fixed
intervals.
You can set the shooting interval at any length from 5 seconds to 3
hours, in increments of 5 seconds.
1. Switch the Mode Selector to 5.
2. Press the M button.
The Shooting Setting menu appears.
3. Press the " button to select
[INTERVAL] and press the O or
$ button.
4. Press the !" buttons to specify
the length of time.
5. Press the $ button to move to the
minutes setting, then use the !"
buttons to set the minutes.
6. Press the $ button to move to the
seconds setting, then use the !"
buttons to set the seconds.
7. Press the O button.
Interval shooting is set and the LCD
monitor displays "Interval".
73
A Variety of Shooting Techniques/Playback
8. Press the shutter release button.
A picture is taken every time the fixed interval elapses.
9. To stop shooting, press the O button.
Interval Shooting settings are cleared when the power is turned off.
Caution
If the time until the next shooting is set longer on the shooting menu than the time for interval
shooting, the shooting interval becomes longer than that for interval shooting.
Note
In step 5, press and hold either the ! or " button to quickly raise or lower the setting
value for minute.
If you use batteries for power, you may exhaust the batteries. Using the AC Adapter (sold
separately) is recommended.
Even during Interval Shooting, if you press the shutter button, the camera will shoot as
usual. However, Interval Shooting Mode is unaffected. After shooting, once the time
specified in Interval Shooting elapses, the next shot is taken.
When Interval Shooting is on, even when Multi-Shot is set to [CONT] or [MCONT],
consecutive shooting is automatically switched off.
74
2 Shooting a Still Image with Sound
(IMAGE WITH SOUND)
You can shoot a still image with a voice memo. Voice recording can
continue for up to eight seconds.
1. Switch the Mode Selector to 5.
2. Press the M button.
The Shooting Setting menu appears.
3. Press the
"
button to select [IMAGE WITH SOUND] and
then press the O or $ button.
4.
Press the
!"
buttons to select [ON].
5. Press the O or # button.
6.
If you pressed the
#
button in step
5, press also the
M
button.
The Shooting Setting menu disappears.
7. Press the shutter release button
for shooting.
After shooting, the voice mark appears on
the screen to indicate the recording
status.
8. Press the shutter release button
to stop recording.
Note
When playing back a still image with sound, display the image in the same way as an ordinary
image without voice. Pressing the O button plays back the sound.
Press the !" buttons to display the volume adjustment bar, where you can adjust the
volume with the !" buttons.
Reference
For how to display still images, see P.42.
75
A Variety of Shooting Techniques/Playback
Inserting the Date into a Still Image
(DATE IMPRINT)
You can insert the date (YY/MM/DD) or the date and time (YY/MM/
DD hh:mm) at the lower right of a still image.
1. Switch the Mode Selector to 5.
2. Press the M button.
The Shooting Setting menu appears.
3. Press the " button to select [DATE IMPRINT] and then
press the O or $ button.
4. Press the !" buttons to select
the desired setting.
5. Press the O or # button.
The Date Imprint settings are completed.
6. If you pressed the # button in
step 5, press also the M
button.
The shooting setting menu disappears
and the LCD monitor displays .
This setting will be used for shooting until
you change it.
Note
If the date and time have not been set, DATE IMPRINT cannot be used. First make the
date and time settings (P.117).
DATE IMPRINT cannot be used with movies.
A thumbnail image is not displayed with a date.
76
Changing the Exposure (EXPOSURE COMP.)
The exposure setting allows you to select brightness levels for your shots.
Normally, if your subject is centered, backlight compensation is automatically
activated, and you can shoot with correct exposure.
However, in the following cases, or when you intentionally want to change the
exposure, you can change the exposure setting. Exposure can be specified in
the range from -2.0 to +2.0. Setting the level higher (+) makes pictures
brighter and lower (-) makes pictures darker.
For Backlighting
When the background is particularly bright, the subject will be dark (under-
exposure). In this case, set the exposure level higher (+).
When your subject is whitish
It will turn out entirely dark (underexposure). Set the exposure level higher (+).
When your subject is darkish
It will turn out entirely bright (overexposure). Set the exposure level lower (-).
The same happens when you take photos of people in a spotlight.
1. Switch the Mode Selector to 5.
2. Press the ADJ. button.
The Exposure Compensation bar
appears.
3. Press the !" buttons and specify
a value.
4. Press the O button.
The setting of exposure compensation is
completed and the LCD monitor displays the set values.
Note
When shooting in particularly bright places, you may fail in preventing overexposure. In that
case, the [!AE] symbol will be displayed.
To change the setting, use either the Shooting Setting menu or the ADJ. button.
This section explains easy ways with the ADJ. button.
When using the Shooting Setting menu, see "Using the Shooting Setting Menu" ( P.59).
77
A Variety of Shooting Techniques/Playback
Using Natural and Artificial Lighting
(WHITE BALANCE)
Adjust the white balance so that a white subject may be reproduced as white.
At purchase, the White Balance is set to "AUTO"; normally you do not need to
change the setting, but if the camera is having difficulty determining the white
balance when shooting an object of a single color or under several light sources, you
can change the setting.
1. Switch the Mode Selector to
5
.
2. Press the ADJ. Button three times.
The White Balance menu appears.
3. Press the !" buttons to select a mode other than .
You can also press the shutter button in this state.
4. Press the O button.
White Balance settings are completed
and the symbol appears on the screen.
This setting will be used for shooting
until you change it.
Types of Modes You Can Select
Symbol Mode Description
AUTO Auto Make adjustments automatically.
Daylight
Select when shooting outdoors (Sunny) and White Balance fails to adjust properly.
Overcast Select when shooting in cloudy weather or shade and the White Balance fails to
adjust properly.
Tungsten light
Select when shooting under tungsten light and White Balance fails to adjust properly.
Tungsten light 2
Shooting under tungsten light (slightly reddish, compared with Tungsten light Mode)
Fluorescent light
Select when shooting under fluorescent light and White Balance fails to adjust properly.
One-push Manually set White Balance.
To change the setting, use either the Shooting Setting menu or the ADJ. button.
This section explains easy ways with the ADJ. button.
When using the Shooting Setting menu, see "Using the Shooting Setting Menu" ( P.59).
78
Setting the White Balance Manually (One Push)
1. Switch the Mode Selector to
5
.
2. Press the ADJ. Button twice.
The White Balance menu appears.
3. Press the !" buttons to select
(One Push).
4. Point the camera at a piece of
paper or something white under
the lighting conditions for your
picture.
5. Press the M button.
White Balance is set.
6. Press the O button.
The setting of white balance is completed
and the LCD monitor displays a marking.
This setting will be used for shooting until
you change it.
If you press the M button in step 5,
the screen refreshes to show the White
Balance settings made. If the result is not
as expected, repeat steps 4 and 5 to change the settings as many times
as required.
Note
In Auto Mode, white balance may not be adjusted correctly for a subject that is mostly dark. In
this case, add something white as the subject.
Caution
When shooting with flash, white balance may not be adjusted correctly. In this case, switch to
Auto Mode for shooting with flash.
79
A Variety of Shooting Techniques/Playback
Changing Sensitivities (ISO SETTING)
The ISO sensitivity indicates how sensitive to light the film is. A
greater value means higher sensitivity. High sensitivity is suitable for
shooting an object in a dark place or moving fast and suppresses
blurring. However, the images become rough.
For higher or lower sensitivity, you can select from the following six
levels:
AUTO, ISO64, ISO100, ISO200, ISO400, ISO800
A digital camera can automatically vary the sensitivity according to
the distance, brightness, zoom, and macro (AUTO). Usually use
your camera in the AUTO mode.
1. Switch the Mode Selector to 5.
2. Press the ADJ. Button three times.
The ISO Sensitivity menu appears.
3. Press the !" buttons to select an
ISO setting.
You can also press the shutter button in
this state.
4. Press the O button.
The setting of ISO sensitivity is completed
and the LCD monitor displays the set
values.
This setting will be used for shooting until
you change it.
Note
In Wide-angle Zoom mode, when the ISO Sensitivity is set to Auto, the sensitivity is
equivalent to ISO160 with flash or ISO100 without flash.
To change the setting, use either the Shooting Setting menu or the ADJ. button.
This section explains easy ways with the ADJ. button.
When using the Shooting Setting menu, see "Using the Shooting Setting Menu" ( P.59).
80
Limiting the Shutter Release Speed
(SLOW SHUTTER LMT)
By setting this function to [ON], the maximum shutter release speed
can be limited to the following:
In Wide-Angle (W): 1/8 second
In Telephoto (T): 1/30 second
When the function is set to [OFF], the maximum shutter release
speed is 1 second.
1. Switch the Mode Selector to 5.
2. Press the M button.
The Shooting Setting menu appears.
3. Press the " button to select
[SLOW SHUTTER LMT] and press
the O or $ button.
4. Press the !" buttons to select
[ON] or [OFF].
5. Press the O or # button.
The setting of shutter release speed limit
is complete.
6. If you pressed the # button in step 5, press also the M
button.
The shooting setting menu disappears and the LCD monitor displays the
set values.
This setting will be used for shooting until you change it.
Note
When Time Exposure is set to ON, priority is given to Time Exposure.
When Nightscape is selected in Scene Mode, priority is given to Nightscape.
When the flash is in Slow Synchro mode, the longest shutter speed is one second.
81
A Variety of Shooting Techniques/Playback
Returning the Shooting Setting Menu
Settings to their Defaults
(RESTORE DEFAULTS)
To return the Shooting Setting menu settings to their defaults, follow
the steps below.
1. Switch the Mode Selector to 5.
2. Press the M button.
3. Press the !" buttons to select
[RESTORE DEFAULTS] and press
the O or $ button.
4. Make sure that [YES] is selected,
and then press the O button.
The display indicates the camera is
restoring the initial settings; once it is
finished, the display returns to the Mode
screen.
Reference
For a list of functions whose settings are not cleared by power-off, see P.158.
82
Changing Shading for Shooting Text
(DENSITY)
You can change the shading of text for shooting in Text Mode of
Scene Mode.
You can select from DEEP, NORMAL and LIGHT.
1. Switch the Mode Selector to 5.
2. Press the ! button.
The still image mode selection screen appears.
3. Press the " button to move to the SCENE menu.
4. Press the #$ buttons to select the
text mode and then press the O
button.
5. Press the ADJ. button.
The Text Density menu appears.
6. Press the !" buttons to select
the desired density setting.
You can also press the shutter button in
this state.
7. Press the O button.
Text Density settings are completed.
The Text Density setting value does not appear on the screen. This
setting will be used for shooting until you change it.
Reference
For how to shoot text, see P.39.
To change the setting, use either the Shooting Setting menu or the ADJ. button.
This section explains easy ways with the ADJ. button.
When using the Shooting Setting menu, see "Using the Shooting Setting Menu" ( P.59).
83
A Variety of Shooting Techniques/Playback
Using the AF Target Shift Function
At macro shooting, the AF target shift function allows you to lock the
focus (P.34) by using the !"#$ buttons on the camera without
moving the camera.
This is useful for macro shooting on a tripod with locked focus.
The AF target shift function allows you to shift the cross at the center
of the LCD monitor to the subject with the !"#$ buttons for
focusing.
1. With the camera ready to shoot, press the N button.
The Macro symbol is displayed at the top of the screen.
2. Press the ADJ. Button four times.
Press five times if the ADJ. button has
the fourth function.
3. Shift the cross to the subject with
the !"#$ buttons for focusing.
4. Press the O button.
5. Half-press the shutter button
The camera focuses on the cross.
6. Gently press the shutter button all
the way.
Until you get out of the Macro mode, the AF target shift function
automatically focuses the camera on the set position.
Press the #
button to shift the
cross (focus) to
the left
84
TUsing the Self-Timer
You can set the Self-timer to shoot after either two or ten seconds.
A setting of two seconds is useful for preventing camera shake.
1. Switch the Mode Selector to 5.
2.
Press the
T
(Self-timer) button.
The Self Timer mark appears momentarily
in a large size at the center of the LCD
monitor and then is displayed at the upper
left.
The "10" to the right of the symbol
indicates the number of seconds. In this
case, if you press the shutter button, the
camera will shoot after 10 seconds.
3. Press the shutter release button.
The focus is locked, the flash goes on, and the self-timer starts.
Once the picture is taken, the self-timer mode is cleared.
Note
Each press of the T (Self-timer) button, it selects a function in the following sequence: 10
sec, 2 sec, Self-timer Off, 10 sec, 2 sec.
Self-timer settings are released when the power is turned off.
When the self-timer is set to 2 seconds, the flash indicator for self-timer does not fire.
85
Shooting with Multi-Shot
If you switch to Multi-Shot, you can shoot consecutive images.
Multi-shot can be classified into the following types:
CONT (Multi-Shot)
As long as you hold the shutter button
down, pictures continue to be taken.
The still images are recorded one file
each, just as in normal shooting.
S (Stream) Multi-Shot
With just one full-press of the shutter, you
can take 16 consecutive shots at
intervals of 1/7 second (in about 2.2
seconds).The 16 still images are grouped
together as a set and are recorded as
one image file (2560 x 1920 pixels).
M (Memory-reversal) Multi-Shot
The camera memorizes the scene while you hold the shutter release
button down, and once you release it the previous 2.2 seconds of
shots are recorded.
The 16 still images are grouped together as a set and are recorded
as one image file (2560 x 1920 pixels).
1. If you release the shutter release button here...
2. The camera records for about 2.2 seconds ahead
86
Note
When shooting with S Multi- or M Multi-Shot, the ISO sensitivity is fixed to AUTO even if it is
set to 64,100.
The maximum number of images that can be shot in the Multi-Shot mode depends on the
image size setting as follows:
1. Switch
the Mode Selector to
5
.
2. Press the M button.
The Shooting Setting menu appears.
3.
Press the
"
button to select [CONT] and press the
O
or
$
button.
4.
Press the
!"
buttons to select
[CONT], [SCONT], or [MCONT].
5. Press the
O
or
#
button.
6. If you pressed the
#
button in
step 5, press also the M
button.
The Shooting Setting menu closes and
the symbol is displayed at the top of the
screen.
F2560 N2560 F2048 N2048 F1280 N1280 N640
3333131313
87
A Variety of Shooting Techniques/Playback
CONT
7.
Compose your picture, then press and hold the shutter
button.
As long as you hold the shutter button down, pictures continue to be
taken.
8. Release your finger from the shutter release button to stop
recording.
To playback consecutive images shot in Multi-Shot mode, turn the camera
to playback mode (see P.42) and select the still image with the #$
buttons for playback.
SCONT (S Multi-Shot)
7.
Compose your picture, then press the shutter button.
16 pictures are taken automatically.
MCONT (M Multi-Shot)
7.
Compose your picture, then press and hold the shutter
button.
The camera memorizes the scene while you hold the shutter release
button down.
8. Release your finger from the shutter release button.
The camera stops memorizing and the previous 16 still images (in about
2.2 seconds) are recorded as one still image.
Note
When you want to return to normal single-shot shooting, follow step 1 through 3, select
[OFF] in step 4, and press the O button.
In MCONT mode, if you release the shutter button within 2.2 seconds from the time you
first pressed it, the shots from the time you pressed the shutter until you released it will be
recorded (the number of consecutive shots will be less than 16).
Flash is switched to OFF.
88
Viewing an S Multi-Shot or M Multi-Shot Still
Image in Enlarged Display Mode
While still images (16 frames in a file) taken by SCONT or MCONT
are displayed, one of the 16 frames can be displayed in an enlarged
view. While viewing an enlarged frame image, you can switch
between frames.
To view a shot from S Multi-Shot or M Multi-Shot still images in
Enlarged Display Mode, follow the steps below.
1. Press the Playback button.
The last shot taken is displayed.
2. Press the #$ buttons to display
an S Multi-Shot or M Multi-Shot
still image.
3. Press the 8 (Enlarged Display)
button.
The first frame of consecutive images is
displayed in Enlarged Display Mode.
The shot position bar appears at the
lower part of the LCD monitor.
Press the #$ buttons to feed the shot.
To return to the 16-shot display, press
the O button.
Note
Press the DISP. button to turn on or off the bar display at the lower part of the LCD moitor.
Reference
For how to shoot images in S Multi-Shot or M Multi-Shot mode, see P.85.
89
A Variety of Shooting Techniques/Playback
Shooting/Playing Back Movies
3 Shooting Movies
You can shoot movies with sound.
You can select the image size, either 320 x 240 or 160 x 120 pixels.
You can select number of frames shot per second (frame rate), either 30 or 15.
Each movie you shoot is recorded as one AVI file.
1. Switch the Mode Selector to 3 (Movie Mode).
2. Press the shutter release button.
The camera starts recording.
Recording continues until you press the
shutter button again.
3. Pressing the shutter button again
stops recording.
Caution
While shooting movies, operation sounds may be recorded.
The maximum recording time per shooting depends on your card. Even within the
maximum recording time, some cards may end shooting.
Note
The flash cannot be used.
While shooting movies, only Digital Zoom can be used.
At the time you press the shutter button in Step 2, the shot comes into focus and the white
balance is automatically fixed.
The remaining recording time may not change uniformly because it is recalculated from the
remaining memory capacity during movie recording.
Reference
For how to change the image size for movies, see P.60.
For how to change the frame rate, see P.90.
For how to use the Digital Zoom, see P.36.
For the list of shooting setup menu items available in Movie mode, see P.157.
90
Setting the Frame Rate
The number of shot frames per second (frame rate) in Movie Mode
can be selected from 30 and 15.
1. Switch the Mode Selector to 3.
2. Press the M button.
The shooting setting menu appears.
3. Press the " button to select [FRAME RATE]. Then press the
O or $ button.
4. Press the !" button to select [30
FPS] or [15 FPS].
5. Press the O or # button.
This completes the frame rate setting.
6. If the # button was pressed in
Step 5, press the M button.
The shooting setting menu disappears and
the LCD monitor displays the set values.
The set values are used for shooting until they are changed the next time.
Note
The movie recording time depends on the capacity of the SD memory card.
The recording time is as shown below.
IN 32MB 64MB 128MB 256MB 512MB 1GB
15FPS 320 X 240 1 min
23 s
1 min
27 s
2 min
57 s
5 min
59 s
11 min
56 s
24 min
4 s
46 min
17 s
30FPS 320 X 240 42 s 44 s 1 min
30 s
3 min
2 s
6 min
4 s
12 min
13 s
23 min
30 s
15FPS 160 X 120 5 min
1 s
5 min
18 s
10 min
51 s
21 min
57 s
43 min
44 s
88 min
7 s
169 min
27 s
30FPS 160 X 120 2 min
38 s
2 min
48 s
5 min
45 s
11 min
37 s
23 min
10 s
46 min
42 s
89 min
48 s
91
A Variety of Shooting Techniques/Playback
Playing Back Movies
To playback movies, follow the steps below.
1. Press the Playback button.
The last shot taken is displayed.
For movies, the first frame is displayed as a still image.
2. Move to the movie you want to
view using the #$ buttons.
Press the $ button to display the next
file.
Press the # button to display the
previous file.
3. Press the O button.
Playback begins.
The elapsed playback indicator or the elapsed time is displayed on the
LCD Monitor.
Term
Movie Frames
A movie frame is also called a frame. Movies consist of many frames whose images appear
to be moving when displayed at high speed.
Fast Forward Press the z button during playback.
Rewind Press the Z button during playback.
Pause/Playback Press the O button.
Slow Playback Keep pressing the z button during pause.
Slow Rewind Keep pressing the Z button during pause.
Next Frame Press the z button during pause.
Previous Frame Press the Z button during pause.
Volume Adjustment Press the !" buttons during playback.
92
Recording/Playing Back Sound
2 Recording Sound (Voice Memo)
You can record sound.
Recorded data is stored as a WAV file.
1. Switch the Mode Selector to 2
(Voice Memo Mode).
2. Press the shutter release button.
Sound recording starts.
3. Release your finger from the
shutter release button to stop
recording.
Note
The voice recording time depends on the capacity of the SD memory card.
The table below shows the available recording time.
Capacity Recording Time
28MB (Internal memory) 61 min 32 s
32MB 64 min 38 s
64MB 132 min 13 s
128MB 267 min 17 s
256MB 532 min 38 s
512MB 1073 min 11 s
93
A Variety of Shooting Techniques/Playback
Playing Back Sound
To playback sounds, follow the steps below.
1. Press the Playback button.
The last shot taken is displayed.
2. Press the #$ buttons to select a
sound file for playback (speaker
icon).
Press the $ button to display the next
file.
Press the # button to display the
previous file.
3. Press the O button.
Playback begins.
Fast Forward Press the z button during playback.
Rewind Press the Z button during playback.
Pause/Playback Press the O button.
Volume Adjustment Press the !" buttons during playback.
94
Other Functions Available in Playback Mode
Playback Setting Menu
The Playback menu provides the functions shown in the table below:
Note
The SETUP menu can be accessed from within the Playback Setting menu. For details, see
P.106.
Using the Playback Menu
1. Press the Playback button to Switch the camera to playback
mode.
2. Press the M button.
The Playback menu appears.
3. Press the !" buttons to select
the desired setting.
4. After selecting a setting item,
press the O or $ button.
Each function screen appears.
Setting Option Refer to
SLIDE SHOW P.95
PROTECT Select/Deselect 1 FILE, Select/Deselect ALL FILES, Select Multi-files P.96
DPOF Select/Deselect 1 FILE, Select/Deselect ALL FILES, Select Multi-files P.99
RESIZE 1280, 640 P.102
COPY TO CARD P.103
95
A Variety of Shooting Techniques/Playback
Showing Photos in Order Automatically
(SLIDE SHOW)
You can show the recorded still images, movies, and sound files
sequentially on the LCD Monitor. This function is called a slide show.
To view a slide show, follow the steps below.
1. Press the Playback button.
The last shot taken is displayed.
2. Press the M button.
The Playback menu appears.
3. Make sure that [SLIDE SHOW] is
selected, and then press the O
or $ button.
The slide show starts and files are
played back in order.
If you want to stop the slide show in
progress, press any button on the
camera.
Until stopped, the slide show will repeat
itself.
Note
Still images are displayed for 3 seconds each.
For movies, not just one frame, but the entire movie you shot is displayed.
Sound files are also played back.
96
Write-protecting Your Images (PROTECT)
You can protect files from being accidentally deleted.
Caution
Protected files cannot be deleted normally. However, they will be deleted completely if you
format the memory where the files are stored.
Protecting Files
1. Press the Playback button.
The last shot taken is displayed.
2. Press the #$ buttons to display the file you want to
protect.
3. Press the M button.
The Playback Setting menu appears.
4. Press the " button to select
[PROTECT] and press the O or
$ button.
5. Make sure that [1 FILE] is
selected, and then press the O
button.
97
A Variety of Shooting Techniques/Playback
Protection is applied and the Protect
symbol appears in the upper-left corner of
the screen.
Protecting All Files
To protect all your files, follow the steps below.
1. Press the Playback button.
2. Press the M button.
The Playback menu appears.
3. Press the " button to select
[PROTECT] and press the O or
$ button.
4. Press the !" button to select
[ALL FILES].
5. Make sure that [SELECT] is
selected, and then press the O
button.
Protection is applied and the Protect
symbol appears in the upper-left corner of
the screen.
To remove protection from all your files,
select [CANCEL] in step 5.
Note
You can remove protection from all or multiple files at once.
98
Protecting Multiple Files at Once
To protect selected files all at once, follow the steps below.
1. Press the Playback button.
2. Press the 9 (Thumbnail) button twice.
The screen is divided into 12 frames and displays 12 still images at once.
3. Press the !"#$ buttons to select the first file of the
selection.
4. Press the M button.
The Playback menu appears.
5. Press the " button to select [PROTECT] and press the O
or $ button.
6. Press the !"#$ buttons to
select the next file of the
selection, and then press the O
button.
The Protect symbol appears in the upper-
right corner of the file.
7. Repeat Step 6 to select all the files
you wish to protect.
If you selected a file by mistake, you can deselect by selecting the file and
pressing the O button again.
8. Press the M button.
The display indicates that the selected images are being processed; once
finished, the display returns to the Thumbnail Display screen.
Note
To remove protection from multiple files, follow the same steps described above to select
them and remove protection.
Reference
For details on thumbnail display, see P.45.
99
A Variety of Shooting Techniques/Playback
Using a Printing Service (DPOF)
The still images recorded on an SD Memory Card can be printed out
if you take them to a shop that offers a digital camera print service.
To use a print service, it is necessary to make settings required for
printing. These settings are called DPOF (Dee-Pof) settings.
The DPOF setting specifies one print per still image.
However, if multiple images are selected for batch setting, you can
specify the number of copies to print.
Setting DPOF for the Still Image Displayed
1. Press the Playback button.
2. Display the still image you want to specify.
3. Press the M button.
The Playback Setting menu appears.
4. Press the " button to select
[DPOF] and press the O or $
button.
5. Make sure that [1 FILE] is
selected, and then press the O
button.
Once the DPOF setting is made, the
DPOF symbol appears in the upper-left
portion of the screen.
Note
Removing the DPOF setting for one photo at a time is done in the same way as setting it.
100
Setting DPOF for All Still Images
To apply DPOF settings to all your still images, follow the steps
below.
1. Press the Playback button.
2. Press the M button.
The Playback menu appears.
3. Press the " button to select
[DPOF] and press the O or $
button.
4. Press the !" buttons to select
[ALL FILES].
5. Make sure that [SELECT] is
selected, and then press the O
button.
Once the DPOF setting is made, the
DPOF symbol appears in the upper-left
portion of the screen.
Note
To remove the DPOF setting from all your still images, select [CANCEL] in step 5.
You can remove all or multiple still image DPOF settings at once.
101
A Variety of Shooting Techniques/Playback
Setting DPOF for Multiple Still Images
To make the DPOF setting for selected still images all at once, follow
the steps below.
1. Press the Playback button.
2. Press the 9 (Thumbnail) button twice.
The screen is partitioned into twelve segments to display the thumbnails
of files.
3. Press the !"#$ buttons to select the first still image for
which you wish to make the DPOF setting.
4. Press the M button.
The Playback menu appears.
5. Press the " button to select
[DPOF] and press the O or $
button.
6. Press the !" buttons to set the number of copies to print.
Press the ! button to increase the number, or the " button to decrease
it.
7. Press the #$ buttons to select the next still image for
which you wish to make the DPOF setting.
8. Press the !" buttons to set the number of copies to print.
Press the ! button to increase the number, or the " button to decrease
it.
9. Repeat Steps 7 and 8 to select all the still images for which
you wish to make the DPOF setting.
10.Press the M button.
The display indicates that the selected images are being processed; once
finished, the display returns to the Thumbnail Display screen.
102
Changing the Image Size (RESIZE)
You can reduce the image size of a shot still image to additionally
create a file of a different image size.
Caution
You can resize only still images and still images with voice memos. Movies cannot be resized.
Note
The following types of resizing are possible:
To change the image size, follow the steps below.
1. Press the Playback button.
2. Press the M button.
The Playback Setting menu appears.
3. Press the " button to select
[RESIZE] and press the O or $
button.
4. Press the !" buttons to select
[1280] or [640].
5. Press the O button.
The image size is changed and the
resized still image is displayed.
Reference
For how to change the image size at shooting, see P.60.
Original Resized
F2560/N2560/F2048/N2048 N1280 N640
F1280/N1280 N640
103
A Variety of Shooting Techniques/Playback
Copying the Contents of Internal Memory to
a Memory Card (COPY TO CARD)
You can copy all movies, still images, and sound data stored in
internal memory onto an SD Memory Card at once.
1. Turn the Camera Off.
2. Insert an SD Memory Card.
3. Turn the camera on.
4. Press the Playback button.
5. Press the M button.
The Playback Setting menu appears.
6. Press the " button to select
[COPY TO CARD] and press the
O or $ button.
The display indicates copying is in
progress; once finished, the display
returns to the playback screen.
Note
If the capacity of the SD Memory Card you are copying to is insufficient, a message will be
displayed indicating there is not enough capacity. To copy only the number of shots that
will fit into the available capacity, select [YES] and then press the O button. To cancel
copying, select [NO] and then press the O button.
It is not possible to copy from SD Memory Card to internal memory.
104
Chapter 3
Changing Camera
Settings
Changing Camera Settings........................... 106
106
Changing Camera Settings
SETUP Menu
You can change camera settings by displaying the SETUP menu
from the Shooting Setting menu (see P.58) or Playback Setting
menu (see P.94).
The SETUP menu enables you to set the items listed in the table
below.
Setting Option Refer to
FORMAT [CARD] P.108
FORMAT [INT. MEM.] P.109
LCD BRIGHTNESS P.110
ADJ. BUTT. SET.
[OFF], PIC QUALITY ( ), AF/ MF, SHARP,
PHOTOMETRY ( )
P.111
AUTO POWER OFF OFF, [1], 5, 30 Minutes P.112
BEEP SOUND [ALL], SHUTTER P.113
OPE. ALERT VOL.
OFFᴥǫǫǫᴦ¬SmallᴥǪǫǫᴦ¬
ÛMediumÝᴥǪǪǫᴦ¬LargeᴥǪǪǪᴦ
P.11 4
LCD CONFIRM. OFF, [1], 2, 3 Seconds P.115
SEQUENTIAL NO. ON, [OFF] P.116
DATE SETTINGS P.117
LANGUAGE
ஓట᝙ ¬[ENGLISH]¬DEUTSCH¬FRANÇAIS¬
ITALIANO¬ESPAÑOL¬ዊͶ˹୫ ¬᎞Ͷ˹୫ ¬ 䚐ạ㛨
P.11 8
VIDEO OUT MODE [NTSC], PAL P.119
STEP ZOOM ON, [OFF] P.120
SHTG STGS WARNG. [ON], OFF P.121
USB CONNECTION MASS STR, [ORIGINAL] P.122
ENLGE PHOTO ICON [OFF], ON P.126
107
Changing Camera Settings
Using the SETUP Menu
To display and use the Setup menu, follow the steps below.
Note
For some functions, the choice selection method may not be as explained here. For detailed
operation, see the explanation of each function.
1. Press the M button.
The Shooting Setting menu (or the Playback menu) appears.
2. Press the $ button.
The setup menu appears.
3. Press the !" buttons to select the desired setting.
The setting items are provided on 4 screens.
To select a screen by screen number:
1. Press the # button to select a screen number on the
left of the screen.
2. With the screen number selectable, press the
!"
buttons to switch between screens.
3. After selecting the screen, press the
$ button to return
to the setting item selection step.
4. After selecting a setting item, press the O or $ button.
Choices for the setting item are displayed.
5. Press the !" buttons to select a choice.
6. Press the O or # button.
7. If you pressed the # button in step 6, press also the M
button.
The menu disappears and the camera becomes ready for shooting and
playing back.
When the " button is pressed at the
bottom item, the next screen
appears.
108
Getting the SD Memory Card Ready for Use
(FORMAT [CARD])
If the error message "This card cannot be used" is displayed, or if you have
formatted a card with a computer or some other device, it will be necessary to
format the SD Memory Card prior to use. Formatting is the process of
preparing a card so image data can be written on it.
Caution
If you format a card that still has images stored on it, the images will be lost.
Reference
For how to format internal memory, see P.109.
To format a card, follow the steps below.
1. Display the setup menu.
For detailed operation, see P.107.
2.
Press the
!"
button to select
[FORMAT [CARD]] and press the
O
or
$
button.
A screen appears to confirm formatting.
3. Press the #$ button to select
[YES] and then press the O
button.
Formatting starts. When it is done, the
display returns to the SETUP menu.
If no SD Memory Card is inserted, a message will be displayed.
After turning the power off, load an SD Memory Card and repeat the
formatting process again.
Note
Protecting your images from being deleted
If you move the card's write-protection switch to LOCK, your still images cannot be
accidentally erased and the card cannot be formatted.
If you release the protection (by returning the switch to its original position), it is once again
possible to erase images and format the card.
109
Changing Camera Settings
Formatting Internal Memory
(FORMAT [INT. MEM.])
If an error message "Format the internal memory" is displayed, it will
be necessary to format the internal memory prior to use.
Caution
Formatting the internal memory erases all of the images recorded in the memory. If you have
images that you do not want to erase stored on the internal memory, please contact the Ricoh
Service offices prior to formatting it.
To format internal memory, follow the steps below.
1. Display the setup menu.
For detailed operation, see P.107.
2. Press the !" button to select
[FORMAT [INT. MEM.]] and then
press the O or
$
button.
A screen appears to confirm formatting.
3. Press the #$ buttons to select
[YES] and then press the O
button.
Formatting starts. When it is done, the
display returns to the SETUP menu.
110
Adjusting the Brightness of the LCD Monitor
(LCD BRIGHTNESS)
To adjust the brightness of the LCD Monitor, follow the steps below.
1. Display the setup menu.
For detailed operation, see P.107.
2. Press the !" button to select
[LCD BRIGHTNESS] and press the
O or
$
button.
The LCD Brightness Adjustment bar
appears.
3. Press the !" buttons to adjust
the brightness.
Moving it to the side makes it darker.
Moving it to the side makes it brighter.
The brightness of the screen behind the
bar changes as you alter the setting.
4. When you attain the desired
brightness, press the O button.
The display returns to the SETUP screen.
This setting will be used until you change it.
111
Changing Camera Settings
Setting a Function to the ADJ. Button
(ADJ BTN.SET.)
Each time the ADJ. button is pressed, the camera displays the setting screen
in the order of exposure, white balance, and ISO sensitivity.
By using the [ADJ BTN.SET.] option, you can set a function to be activated
when the ADJ. button is pressed the fourth time.
To assign a function to the ADJ. button, follow the steps below.
1. Display the setup menu.
For detailed operation, see P.107.
2. Press the !" button to select
[ADJ BTN.SET.] and press the O
or
$
button
.
3. Press the !" buttons to select
the desired setting.
4. Press the O or # button.
5. If you pressed the # button in
step 4, press also the M button.
This setting will be used until you change it.
Note
If a function is set with [ADJ BTN.SET], the AF target shift function (P.83) available from the
ADJ. button at Macro shooting is activated when the ADJ. button is pressed the fifth time.
Reference
For how to use the ADJ. button, see P.57.
Possible Settings (Refer to)
OFF *Setting upon purchase
QUALITY (PIC/QUALITY) P.60
AF/MF (FOCUS) P.62
SHARP (SHARPNESS) P.66
PHOTOMETRY P.65
112
Changing Auto Power-Off Settings
(AUTO POWER OFF)
If you do not operate the camera for the set period of time, it will shut
off automatically (Auto Power-off) to conserve battery power.
At the time of purchase, Auto Power-Off is set to one minute, but you
can change this setting.
To change the Auto Power-Off setting, follow the steps below.
1. Display the setup menu.
For detailed operation, see P.107.
2. Press the !" button to select
[AUTO POWER OFF] and press
the O or
$
button
.
3. Press the !" buttons to select
the desired setting.
4. Press the O or # button.
5. If you pressed the # button in
step 4, press the M button.
This setting will be used until you change it.
Note
To continue on using the camera after auto power-off, slide the power switch to close the
lens cover once (power-off) and slide it again to open (power-on). When the Playback
button is pressed, the lens cover does not open but the camera is turned on for use in
Playback Mode.
The Auto Power-off function does not work when the camera is connected to a computer.
When shooting with Interval Shooting, settings made here are not valid and Auto Power-Off
does not work.
Possible Settings
OFF (The Auto Power-Off function does not work)
1 Minute *Setting upon purchase
5 Minutes
30 Minutes
113
Changing Camera Settings
Changing the Beep Sound Setting
(BEEP SOUND)
During operation, the camera generates four types of sounds: start
sound, shutter release sound, focus sound, and beep sound.
To change the beep sound settings, follow the steps below:
1. Display the setup menu.
For detailed operation, see P.107.
2. Press the !" button to select
[BEEP SOUND] and press the O
or
$
button
.
3. Press the !" buttons to select
the desired setting.
4. Press the O or # button.
5. If you pressed the # button in step
4, press also the M button.
This setting will be used until you change it.
Reference
For how to adjust volume, see P.114
Start sound : Sound when the camera power is turned on.
Shutter release sound : Sound when the shutter button is pressed.
Focus sound : When the focus is set, the camera generates the focus sound.
Beep Sound : If an impossible operation is attempted, the camera generates the beep sound.
Possible Settings
SHUTTER (Shutter release sound, Beep Sound)
ALL (all sounds on) *Setting upon purchase
114
Changing the Beep Sound Volume
(VOL. SETTINGS)
The beep sound volume can be changed.
To change the beep sound volume, follow the steps below:
1. Display the setup menu.
For detailed operation, see P.107.
2. Press the !" button to select
[VOL. SETTINGS] and press the
O or $ button.
3. Press the !" buttons to select
the desired setting.
4. Press the O or # button.
5. If you pressed the # button in step
4, press also the M button.
This setting will be used until you change it.
Possible Settings
ǫǫǫ
(Mute)
Ǫǫǫ
(Small)
ǪǪǫ
(Medium) *Setting upon purchase
ǪǪǪ
(Large)
115
Changing Camera Settings
Changing Image Confirmation Time
(LCD CONFIRM.)
Immediately after pressing the shutter button, the still image taken is
displayed for a moment so you can check it.
At purchase, Confirmation Time is set to one second, but this can be
changed.
To change Confirmation Time, follow the steps below.
1. Display the setup menu.
For detailed operation, see P.107.
2. Press the !" button to select
[LCD CONFIRM.] and press the
O or
$
button
.
3. Press the !" buttons to select
the desired setting.
4. Press the O or # button.
5. If you pressed the # button in
step 4, press also the M button.
This setting will be used until you change it.
Possible Settings
OFF (Photo not displayed for confirmation)
1 Second *Setting upon purchase
2 Seconds
3 Seconds
116
Changing File Name Settings
(SEQUENTIAL NO.)
When you shoot a still image, it is stored on an SD Memory Card or in internal
memory, with a consecutively numbered file name automatically assigned.
When you are switching SD Memory Cards, you can set your camera to
continue consecutive numbering from the previously loaded SD Memory Card.
To make changes to file numbering, follow the steps below.
1. Display the setup menu.
For detailed operation, see P.107.
2. Press the !" button to select
[SEQUENTIAL NO.] and press the
O or
$
button
.
3. Press the !" buttons to select
the desired setting.
4. Press the O or # button.
5. If you pressed the # button in
step 4, press also the M button.
This setting will be used until you change it.
Note
When you are recording to internal memory, file names are assigned just as when
[SEQUENTIAL NO.] is set to [OFF].
When transferring images to a computer, if a file already exists with the same name in the
destination folder, your image is renamed before saving to avoid overwrite problem.
When transferring images to a computer via the provided USB cable, the files are assigned
names like RIMG****.jpg (**** indicates the number of the image), even if [SEQUENTIAL
NO] is set to ON.
Possible Settings
ON (Continue numbering) File names will be automatically assigned to still images you take, in the format of
"R" followed by 7 digits, from R0010001.jpg to R9999999.jpg.
With this setting, even when one SD Memory Card is switched with another,
consecutive file numbering from the previous card is continued.
OFF (Do not continue
numbering) *Setting upon
purchase
Every time a new card is loaded, file numbering is assigned, from RIMG0001.jpg
to RIMG9999.jpg.
If numbering exceeds RIMG9999, further recording is not possible
117
Changing Camera Settings
Setting the Date and Time
(DATE SETTINGS)
You can take still images with the time or date stamped onto the
picture.
The date/time setting on the SETUP menu is explained here.
1. Display the setup menu.
For detailed operation, see P.107.
2. Press the !" button to select
[DATE SETTINGS] and press the
O or
$
button
.
3. Press !"#$ to set the year,
month, date and time.
If you hold down the ! or " button, you
can increase/decrease the value quickly.
4. In [FORMAT], choose the date and
time format.
5. Check the display on the bottom
of the screen and then press the
O button.
Once you have set the date and time,
the display returns to the Setup menu.
Note
If the batteries are removed for more than one week, the date and time settings will be lost.
These settings must be made again.
118
Changing the Display Language
(LANGUAGE/ ᜘᝙ )
You can change the language displayed on the LCD Monitor.
To change the display language, follow the steps below.
1. Display the setup menu.
For detailed operation, see P.107.
2. Press the !" button to select
[LANGUAGE/᜘᝙] and press the
O or
$
button
.
The language selection screen appears.
3. Press the !"#$ buttons to
select the desired setting.
4. Press the O button.
This setting will be used until you
change it.
Possible Settings
ஓట᝙¨Êáðáîåóå©
ENGLISH¨Åîçìéóè© *Setting upon purchase
DEUTSCH¨Çåòíáî©
FRANÇAIS¨Æòåîãè©
ITALIANO¨Éôáìéáî©
ESPAÑOL ¨Óðáîéóè©
ዊͶ˹୫ ¨ÓéíðìéæéåäÃèéîåóå©
᎞Ͷ˹୫¨ÔòáäéôéïîáìÃèéîåóå©
䚐ạ㛨¨Ëïòåáî©
119
Changing Camera Settings
Changing the Playback Method for Viewing
on TV (VIDEO OUT MODE)
You can view your still images and movies on a television screen by
connecting your camera to a television with the AV cable that came
with your camera.
Your camera is set to NTSC video format (used in Japan and other
countries) for use with television equipment, etc. If the equipment
you want to connect to uses PAL format (used in Europe and
elsewhere), then switch your camera to PAL format before
connecting.
To change the playback format, follow the steps below.
1. Display the setup menu.
For detailed operation, see P.107.
2. Press the !" button to select
[VIDEO OUT MODE] and press the
O or
$
button
.
3. Press the !" buttons to select
the desired setting.
4. Press the O or # button.
5. If you pressed the # button in
step 4, press also the M button.
This setting will be used until you change it.
Note
Connecting the AV cable to the camera turns off the LCD monitor display.
Reference
For how to view still images on your television screen, see P.47.
Possible Settings
NTSC *Setting upon purchase
PAL
120
Changing the Setting of Step Zooming
(STEP ZOOM)
The focal length with optical zooming can be fixed to any of five
levels (28, 35, 50, 85, and 135 mm as converted equivalent to 35
mm cameras) (Step Zoom).
To set whether to use step zooming (ON) or not (OFF), follow the
steps below.
1. Display the setup menu.
For detailed operation, see P.107.
2. Press the !" button to select
[STEP ZOOM] and press the O
or
$
button
.
3. Press the !" buttons to select
the desired setting.
4. Press the O or # button.
5. If you pressed the # button in
step 4,Press the M button.
This setting will be used until you change it.
Note
For step zooming in Macro Mode, the focal length changes in four steps (35, 50, 85, and 135
mm as converted equivalent to 35 mm).
Reference
For how to use zoom, see P.36.
Possible Settings
OFF *Setting upon purchase
ON
121
Changing Camera Settings
Displaying a Setting Change Warning
(SHTG STGS WARNG.)
You can set the icon of a changed function blink or a warning
message indicating a change will be displayed at power-on for about
5 seconds if the initial settings are changed for the following
functions.
•White Balance
•Focus
ISO Setting
Exposure Comp.
•Time Exposure
If you operate a camera button, the icon is changed from blinking to
steady.
If you operate a camera button during warning message display, the
message disappears.
To set whether to enable (ON) or disable (OFF) the shooting setting
alert, follow the steps below.
1. Display the setup menu.
For detailed operation, see P.107.
2. Press the !" button to select
[SHTG STGS WARNG.] and press
the O or
$
button
.
3. Press the !" buttons to select
the desired setting.
4. Press the O or # button.
5. If you pressed the # button in
step 4, press also the M button.
This setting will be used until you change it.
Possible Settings
OFF
OFF *Setting upon purchase
122
Changing the USB Communication System
(USB Connection)
Changing the USB Communication System (USB Connection)
If the USB communication system is changed (by selecting [MASS
STR] at [USB CONNECTION] on the Setup menu), files in the
camera can be browsed and transferred from the camera to your
computer through the USB cable without installing the accessory
application or USB driver.
Usually, select [ORIGINAL]. When [ORIGINAL] is set, images can
be transferred to your computer by using the attached RICOH Gate
La or Caplio Transfer Software.
Mode Mass Storage Original
Download Method The SD memory card or built-in
memory of the camera can be
operated directly as an external drive
for file processing.
RICOH Gate La allows automatic
transfer to your computer.
Caplio Transfer Software allows transfer
to Ridoc Desk 2000 Lt (Windows only).
The mounter allows transfer to your
computer. (Mac OS)
Installation from Caplio CD-
ROM
Unnecessary Necessary
Supported OS
Windows 98/98 SE XO
Windows 2000 Professional OO
Windows Me OO
Windows XP Home Edition OO
Windows XP Professional OO
Mac OS 8.6 XO
Mac OS 9.0 to 9.2.2 OO
Mac OS X 10.1.2 to 10.3 OO
For those: Familiar with OS file operations
Not willing to install a USB driver or
other
Willing to automate downloading to a
computer
Using Windows 98/98 Second Edition
Using Mac OS 8.6
123
Changing Camera Settings
Caution
At [MASS STR], RICOH Gate La or Caplio Transfer Software cannot be used for file
transfer.
At [MASS STR], files can only be read from the camera and cannot be written into or
deleted from the camera.
For direct printing on a printer supporting both Direct Print and PictBridge, select [Original]
at [USB CONNECTION].
To change the USB communication system, follow the steps below:
1. Display the setup menu.
For the operating procedure, see P.107.
2. Press the !" button to select
[USB CONNECTION]. Then press
the O or $ button.
3. Press the !" button to select a
value.
4. Press the Oor # button.
5. If the # button was pressed in
Step 4, press the M button.
These settings are used until they are changed the next time.
Reference
For how to transfer images by connecting the camera to your computer with the USB cable,
see the Software User Guide.
124
To transfer images in Mass Storage Mode, follow the
steps below:
1. Change [USB CONNECTION] to [MASS STR] on the Setup
menu.
2. Make sure that the camera power is off.
3. Connect the accessory USB cable to a USB port of your
computer.
4. Connect the USB cable to the USB
terminal of the camera.
The camera power becomes on.
Your computer automatically reads a file
necessary for recognizing the camera as a
drive.
After this preparation, the camera is displayed as a drive at My Computer
(Windows) or Desktop (Macintosh).
5. From the displayed drive,
copy a file to the desired
destination.
The figure at right shows the folder
configuration in a drive.
When the contents of the built-in
memory are displayed, the drive
name is RICOHDCI.
Caution
During transfer, do not disconnect the USB cable.
Note
When a SD memory card is inserted, its files are displayed. Otherwise, files in the built-in
memory are displayed.
Example of the Windows
XP screen
125
Changing Camera Settings
Disconnecting the Camera from Your Computer
(Windows)
This display is an example for Windows XP. The terms are different
for other OS but the operations are the same.
1. Click the Remove Hardware Safely
icon at the right end of the task bar.
2. Select [USB Large-capacity Storage
Device] and click [Stop].
3. Check that [USB Large-capacity Storage Device] is selected
and click [OK].
4. Click [OK].
Disconnect the Camera from Your Computer
(Macintosh)
1. Put the displayed drive in the Recycle Bin.
126
Enlarging Icon Display (ENLGE PHOTO ICON)
Icons on the shooting screen are enlarged.
Under this setting, the following icons are enlarged:
•Flash
Macro Shooting
•Self Timer
White Balance
Focus
Exposure Compensation
ISO Sensitivity
If icons are enlarged, the following items are not displayed:
Zoom Bar/Focus Bar
Date/Time
Sharpness
Color Depth
To enlarge icons on the shooting screen, follow the steps below:
1. Display the setup menu.
For the operating procedure, see P.107.
2. Press the !" button to select [ENLGE PHOTO ICON]. Then
press the O or $ button.
3. Press the !" button to select
[ON].
4. Press the O or # button.
The setting of shooting icon enlargement
is completed.
5. If the # button was pressed in
Step 4, press the M button.
These settings are used until they are changed the next time.
Chapter 4
Installing Software
Installing the Provided Software (For Windows)..128
Installing the Provided Software (For
Macintosh)...................................................... 139
128
Installing the Provided Software
(For Windows)
You need to install software for transferring images to your computer
before you can download images from the camera.
Reference
For how to download images from the camera into your computer, see the Software User
Guide available from the Caplio Software CD-ROM. For how to display the Software User
Guide, see P.129.
Caution
Be sure to install the software before you connect the
camera to your computer with the cable.
Software that can be installed from the Caplio Software
CD-ROM
Once you insert the Caplio Software
CD-ROM in the CD-ROM drive, the
following screen appears
automatically:
Item Name Description (Refer to)
Install Caplio Software Use this button to install software required for handling the
camera and images.
P. 1 31
View Software User Guide Use this button to display the Software User Guide (PDF). P.129
Browse CD-ROM Use this button to display the list of files contained on the CD-
ROM.
P. 1 29
129
Installing Software
When [Install CaplioSoftware ] is clicked: (P.131)
The following software will be installed:
XP:Windows XP 98:Windows 98/98SE/Me/2000
Reference
The camera is provided with software ImageMixer that allows you to display and edit images from your computer.
For how to use ImageMixer, click the [?] button on the ImageMixer window and see the displayed manual.
For more information on the ImageMixer, contact the Customer Support Center below.
For the latest information about the ImageMixer, access the Web page of Pixela Co., Ltd.
(http://www.imagemixer.com).
When [View Software User Guide] is clicked:
The Software User Guide (PDF file) on the Caplio Software CD-ROM can be displayed on
your computer screen. If you are a Windows user and have Acrobat Reader installed on
your computer, simply double-click [View Software User Guide].
If not installed, Acrobat Reader should be installed (see P.135).
Click [Browse CD-ROM].
You can check folders and files on the CD-ROM.
The CD-ROM contains not only the Caplio software but also the following software. These
software products run on Windows.
For the installation of each software product, see the Reference page in the table below.
Reference
For details about the Acrobat Reader, see Help for the Acrobat Reader.
To install ImageMixer alone, double-click Setup.exe in the ImageMixer folder.
Software Windows Description
XP 98
RICOH Gate La OODownloads images.
ImageMixer OOShot images can be displayed or edited and video CDs can be created.
DirectX (see P.136) is necessary for handling movies.
USB Driver OOConnects the camera to your computer.
WIA Driver O - Downloads images.
Mounter - - Connects the camera to your computer.
List Editor OONot used by this model but used by other models of Caplio camera.
Caplio Setting OO
Caplio Server OO
Software Description Refer to
Acrobat Reader Required for viewing the Software User Guide. P.135
DirectX Necessary for playing movies by the ImageMixer. P.136
130
System Requirements for Using the
Provided Software
The following environments are necessary for using the provided software.
Please check your computer, or the computer's user manual.
Caution
If your computer has an upgraded OS, the USB function may not work normally, so it
cannot be supported.
Problems may arise due to changes made to the OS, such as through patches or a service
package release.
The camera does not support connection to a USB port added by using an extension
function (PCI bus or other).
If used in conjunction with a hub or other USB devices, the software may not work properly.
When dealing with movies and other large files, a larger memory environment is
recommended.
Reference
For how to download images to your computer using an SD Memory Card, see the Software
User Guide.
Operating Systems Supported Windows 98/98 Second Edition
Windows 2000 Professional
Windows Me
Windows XP Home Edition/Professional
CPU Pentium 3: 500MHz or more
Memory Windows 98/98SE: 128MB or more
Windows 2000: 128MB or more
Windows Me: 128MB or more
Windows XP: 256MB or more
Hard drive space required for
installation
Windows 98/98SE: 500MB or more
Windows 2000: 500MB or more
Windows Me: 500MB or more
Windows XP: 500MB or more
Display resolution 800 x 600 pixels or greater
Display colors 65000 colors or greater
CD-ROM drive A CD-ROM drive compatible with the above-mentioned computer body
USB port A USB port compatible with the above-mentioned computer body
131
Installing Software
Installing the Software on Your Computer
Caution
Do not connect your camera to the computer until indicated. If you happened to connect
your camera to the computer (resulting in the [Add New Hardware Wizard] screen
appearing), simply click [Cancel], and after disconnecting your camera, install the software
on your computer.
If a message is displayed during installation to uninstall the old Caplio software before
installing the new one, uninstall the old Caplio software once and install the new one again
by following the message instructions. Even with the new Caplio software, however, the
image downloading and other functions of the old model can still be used as before. (For
how to uninstal the software, see P.137.)
For Windows XP or Windows 2000, Administrator privileges are required to install the
software.
Note
Here is an example of the Windows XP screen.
1. Start your computer and insert the
Caplio CD-ROM in the CD-ROM
drive.
The screen shown on the right appears
automatically.
2. Click [Install CaplioSoftware].
After a while, the [Select Setting
Language] screen appears.
3. Confirm the language, and then click [OK].
After a few moments, the [Welcome to InstallShield Wizard] screen
appears.
4. Click [Next].
After a few moments, the [Select
Installation Destination] screen appears.
132
5. Confirm where you want to install
and then click [Next].
The [Select Program Folder] screen
appears.
6. Confirm where you want to install
and then click [Next].
Then the ImageMixer installer starts up
successively.
7. Click [Finish].
8. Restart your computer.
Reference
For how to remove (uninstall) the software, see P.137.
133
Installing Software
Connecting the Camera to Your Computer
After installing the software on your computer, connect your camera
to it.
1. Make sure the camera power is off.
2. Connect the USB cable to the
USB port of your computer.
3. Connect the USB cable to the
USB terminal of your camera.
Your camera turns on.
For Windows XP
The first time you connect your camera to the computer using a USB
cable, the [Found New Hardware Wizard] screen will appear.
1. Select [Install the software
automatically (Recommended)].
2. Insert the Caplio Software CD-ROM into the CD-ROM drive
on your computer.
Installation of the WIA Driver automatically starts. If the CD-ROM is
already on your computer when the [Found New Hardware Wizard]
window is displayed, simply click [Next] to start installation.
134
Note
By default, the WIA driver is installed in the following location:
3. Select [RICOH Gate La], check
[Always use this program for this
action] check box, and then click
[OK].
To load images from the camera with assistance from the Windows XP
Scanner and Camera Wizard, select [Scanner and Camera Wizard].
Leaving the [Always use this program for this action] check box
unchecked will cause the [Caplio R2] screen to be displayed each time
you transfer images from the camera, thereby allowing you to choose
whether to use RICOH Gate La or the Scanner and Camera Wizard for
image transfers.
If your PC is installed with Windows XP Service Pack2 and a warning
message is displayed, see P.151.
Disconnecting the Camera from Your Computer:
1. Turn your camera off by pressing the power button.
2. Unplug the USB cable.
Note
It is recommended that you use the AC Adapter (sold separately) when you are downloading
images from your camera.
My Computer
Local Disk
Program Files
Caplio Software
WIA Driver
135
Installing Software
Installing Acrobat Reader
Acrobat Reader is required to display the operation manual (PDF
file).
If the computer is running under Windows, Acrobat Reader can be
installed.
Acrobat Reader need not be installed if already installed on your
computer.
Caution
Do not install the software when the camera is connected to your computer with a USB
cable.
For Windows XP or Windows 2000, Administrator privileges are required to install the
software.
1. Start your computer, and insert the
included Caplio Software CD-ROM
into the CD-ROM drive.
The following screen appears
automatically.
2. Click [Browse CD-ROM].
The files on the CD-ROM are listed.
3. Double-click the [Acrobat] folder.
4. Double-click the [English] folder.
5. Double-click [ar500enu] (ar500enu.exe).
6. Install Acrobat Reader by following the messages
displayed.
136
Installing DirectX
DirectX is a program to play a movie file by the ImageMixer.
This camera requires DirectX 8.1 or later to play movie files in
Windows. If you have an earlier version installed, please install the
updated version available on the accompanying CD-ROM.
For Windows XP, installation of DirectX is not needed because the
updated version is already installed.
Caution
Do not install the software when the camera is connected to your computer with a USB
cable.
For Windows XP or Windows 2000, Administrator privileges are required to install the
software.
1. Start your computer, and insert the included Caplio
Software CD-ROM into the CD-ROM drive.
2. Click [Browse CD-ROM].
3. Double-click the [DirectX] folder.
4. Double-click the [English] folder.
5. Double-click the following file:
Windows98/98SE/Me [DX81xxx.exe] in the [Win98Me] folder
Windows2000 [DX81NTxxx.exe] in the [Win2000] folder
137
Installing Software
Uninstalling the Software
Caution
For Windows 2000/XP, Administrator privileges are required to uninstall the software.
If any other program is active or unsaved data remains, save the data and terminate the
program before uninstalling.
1. Click [Start] on the Windows task bar.
2. Select [Settings]-[Control Panel] ([Control Panel] for XP]).
3. Double-click the [Add/Remove Programs] icon (or the [Add
Or Remove Programs] icon in Windows XP).
4. Select [Caplio Software] and then click [Change/Remove].
5. Confirm file deletion and click [OK].
The [Shared File Detected] dialog box appears.
6. Select the [Don't display this message again.] check box,
and then click [OK].
The uninstallation process begins. When it is finished, close the displayed
window.
138
Uninstalling the ImageMixer
Caution
For Windows 2000/XP, Administrator privileges are required to uninstall the software.
If any other program is active or unsaved data remains, save the data and terminate the
program before uninstalling.
1. Click [Start] on the Windows task bar.
2. Select [Settings]-[Control Panel] ([Control Panel] for XP]).
3. Double-click the [Add/Remove Programs] icon (or the [Add
Or Remove Programs] icon in Windows XP).
4. Select [ImageMixer] and then click [Change/Remove].
5. Confirm file deletion and click [OK].
6. Select the [Don't display this message again.] check box,
and then click [OK].
139
Installing Software
Installing the Provided Software
(For Macintosh
)
You need to install software for transferring images to your computer
before you can download images from the camera.
Reference
For how to download images from the camera into your computer, see the Software User
Guide available from the Caplio Software CD-ROM. For how to display the Software User
Guide, see P.140.
Caution
Be sure to install the software before you connect the
camera to your computer with the cable.
Software that can be installed from the Caplio Software
CD-ROM
Once you insert the Caplio Software
CD-ROM in the CD-ROM drive, the
following screen appears automatically:
Item Name Description (Refer to)
Install Caplio Software Use this button to install software required for handling the
camera and images.
P.142
View Software User Guide Use this button to display the Software User Guide (PDF). P.140
Browse CD-ROM Use this button to display the list of files contained on the CD-
ROM.
P.140
140
When [Install CaplioSoftware ] is clicked:
The following software will be installed:
9:Mac OS 8.6 to Mac OS 9.2.2 X: Mac OS X 10.1.2 to 10.3
When [View Software User Guide] is clicked:
The Software User Guide (PDF file) on the Caplio Software CD-
ROM can be displayed on your computer screen.
If not installed, Acrobat Reader should be installed.
By clicking [Browse CD-ROM], ...
you can check folders and files on the CD-ROM.
Software Mac Description
9 X
RICOH Gate La O - Downloads images.
USB Driver OOConnects the camera to your computer.
Mounter OOConnects the camera to your computer.
141
Installing Software
System Requirements for Using the
Provided Software
The following environments are necessary for using the provided
software.
Please check your computer, or the computer's user manual.
Caution
Problems may arise due to changes made to the OS environment setting.
Connection to a USB port retrofitted using an extended function (PCI bus, etc.) cannot be
supported.
If used in conjunction with a hub or other USB devices, the software may not work properly.
Note
When dealing with movies and other large files, a larger memory environment is
recommended.
For Mac OS 8.6 to 9.2.2, use a larger memory environment, as well as allocating extra
application memory.
While the software can be operated at 256 colors or more for the Display Color, it is
strongly recommended that 32,000 or more be used.
Reference
For how to download images to your computer using an SD Memory Card, see the Software
User Guide.
Operating System Mac OS 8.6 to 9.2.2 / Mac OS X 10.1.2 to 10.3
Macintosh A USB port standard-equipped Apple Macintosh Series
Internal Memory Mac OS 8.6 to 9.2.2 96 MB or more (128 MB or more recommended)
Mac OS X 10.1.2 to 10.3 128 MB or more (256 MB or more recommended)
Application Allocated Memory
(For Mac OS 8.6 to 9.2.2)
Without using the compression utility, 16MB or more (24 MB or more is recommended) as
Application Memory
Hard Disc Drive Capacity Mac OS 8.6 to 9.2.2 10 MB or more (at installation)
Mac OS X 10.1.2 to 10.3 100 MB or more (at installation)
100 MB or more (at operation)
Display resolution 640 x 480 pixels or greater (800 x 600 or greater recommended)
Display colors 256 colors or greater (32000 or greater recommended)
CD-ROM drive A CD-ROM drive compatible with the above-mentioned Macintosh machine
USB port A USB port compatible with the above-mentioned computer body
142
Installing the Software on Your Computer
(Mac OS 8.6 to 9.2.2)
1.
Turn on your Macintosh and insert the Caplio Software CD-
ROM in the CD-ROM drive.
2. Select the OS 9 folder.
The [Caplio Installer] icon appears.
3. Double-click [Caplio Installer].
The "Caplio Installer" window opens.
4. Click [Install CaplioSoftware].
5. Click [OK].
6. Click [Install].
When installation finishes, a message
appears to inform you that it is
necessary to restart your Macintosh.
7. Click [Continue].
The software is installed and after a while the Installation Complete
message appears.
8. Click [Restart].
Your Macintosh restarts.
Note
To remove (uninstall) the software:
To remove (uninstall) the software from your Macintosh, drag and drop the installed file into
the Trash.
File Name Folder Name
RICOH Gate La System Folder: Control Panels
RICOH Gate La Prefs System Folder: Preferences
Caplio Mounter System Folder: Extensions
Caplio Mounter Prefs System Folder: Preferences
Caplio USB Driver System Folder: Extensions
143
Installing Software
Installing the Software on Your Computer
(Mac OS X 10.1.2 to 10.3)
1.
Turn on your Macintosh and insert the Caplio CD-ROM in
the CD-ROM drive.
2. Open the Mac OS X folder.
The [Caplio Mounter.pkg] icon appears.
3. Double-click [Caplio Mounter.pkg].
The Installer starts. A screen appears
prompting you to enter the
administrator's password.
4. Click the key icon.
An authentication window appears.
5. Enter the administrator's name
and password, and then click [OK].
6. Click [Continue].
The [Select a Destination] screen
appears.
144
7. Click the destination volume you
want, and then click [Continue].
8. Click [Install].
When installation finishes, a message
appears to inform you that it is
necessary to restart your Macintosh.
9. Click [Continue Installation].
The software is installed, and after a
while an Installation Complete message
appears.
10.Click [Restart].
Your Macintosh restarts.
Note
To remove (uninstall) the software:
1. Start [Caplio Mounter] in [Applications] folder.
2. Select [Uninstall] in [File] menu.
The uninstallation process begins.
Chapter 5
Troubleshooting
Troubleshooting ............................................ 146
Appendices .................................................... 153
146
Troubleshooting
Troubleshooting the Camera
Power Supply
Symptom Cause Remedy
Refer
to
The power does not come
on.
Batteries are not loaded. Or they are
exhausted.
Load the batteries correctly. Recharge
or use the AC Adapter.
P. 2 0
P. 2 1
P.155
The battery is unacceptable. Replace the battery with an acceptable
one.
P. 1 6
The AC Adapter is not connected
correctly.
Reconnect it properly. P.155
The camera is automatically turned
off by Auto Power-off.
Slide the power switch to close the lens
cover once (power-off) and slide it again
to open (power-on).
P. 2 4
The power cuts out during
use.
The camera was left unattended and
unused, so Auto Power-Off shut it off.
Slide the power switch to close the lens
cover once (power-off) and slide it again
to open (power-on).
P. 2 4
Batteries are running low. If using alkaline batteries, replace the
batteries with a new set. If using
rechargeable batteries, recharge or use
the AC Adapter.
P. 1 6
An unacceptable battery (manganese
dry cell or other) is used.
Replace the battery with an acceptable
one.
P. 1 6
The power does not go
off.
Camera malfunction. Remove batteries once and load them
again. Reconnect the AC adapter cable
properly, if using.
P. 2 0
P. 2 1
P.155
Although the battery is new,
a battery marking is
displayed to indicate a low
battery level.
Although the battery is new,
pressing the shutter release
button retracts the lens.
Although the battery is new,
pressing the shutter release
button turns the power off.
An unacceptable battery (manganese
dry cell or other) is used.
Replace the battery with an acceptable
one.
P. 1 6
Cannot recharge the
batteries.
Battery life. Replace the batteries with a new set. P.16
Batteries run out quickly. They are being used in extreme high
or low temperatures.
--
Many shots are being taken in dark
places inside, requiring flash.
--
147
Troubleshooting
Shooting
Symptom Cause Remedy
Refer
to
The camera does not
shoot even if you press
the shutter release button.
Batteries are not loaded. Or they are
exhausted.
If using alkaline batteries, replace the
batteries with a new set. If using
rechargeable batteries, recharge or use
the AC Adapter.
P. 1 6
P. 2 0
P.155
The power is not on.
The camera is not in Still Image,
Movie, or Sound (Voice Memo) Mode.
Turn on the camera by sliding the power
switch to open the lens cover.
If the auto power-off function is enabled,
the power may have been turned off
automatically even when the lens cover
is open.In that case, slide the power
switch to close the lens cover once
(power-off) and slide it again to open
(power-on).
P. 2 4
The camera is in Playback Mode. Set the mode selector to a shooting
mode (Still Image Mode, Movie Mode, or
Voice Mode) and press the Playback
button.
P. 3 1
P. 3 2
The shutter button is not pressed all
the way.
Press the shutter button all the way. P.31
P. 3 2
The Memory Card is not formatted. Format the card. P.108
The Memory Card does not have any
free space.
Load a new card, or delete unwanted
files.
P. 2 1
P. 4 9
End of Memory Card life. Load a new memory card. P.21
The flash is recharging. Wait until the flash lamp stops blinking. P.38
The SD Memory Card is "locked". Release the "Lock (write-protection)". P.19
The SD Memory Card's contact
surfaces are dirty.
Wipe off with a soft, dry cloth. -
Failed to confirm the shot
image.
The image confirmation time is too
short.
Lengthen the image confirmation time. P.115
Images do not appear on
the LCD Monitor.
The power is not on. Or the LCD
Monitor is dark.
Turn the power on. Or adjust the
brightness of the LCD Monitor.
P. 2 4
P. 11 0
The VIDEO/AV cable is connected. Diconnect the VIDEO/AV cable. P.47
The screen display status is in
[SYNCHRO-MONITOR MODE].
Press the DISP. button and switch
display.
P. 2 7
Although it is set to Auto
Focus, it does not focus.
The lens or AF Window is dirty. Wipe clean with a soft, dry cloth. P.12
The subject is not in the center of the
shooting range.
Shoot with Focus Lock. P.34
It is a hard-to-focus subject. Shoot with Focus Lock or Manual Focus. P.34
P. 6 2
148
A picture is blurred. You moved the camera when
pressing the shutter release button.
Hold the camera with your elbows tight
on your body. Or use a tripod.
P. 2 9
When shooting in a dark place (ex.
indoor), the shutter speed slows down
and pictures become easily blurred.
Use the flash. Or, raise the ISO
sensitivity.
P. 3 8
P. 7 9
The flash does not fire. Or
the flash cannot recharge.
Flashing is prohibited in the following
statuses:
- White Balance Bracket enabled
- Continuous Shooting Mode
- Movie Mode
In some Scene Modes, flashing may
be prohibited by default. (see P.156)
For shooting with the flash, change the
settings or mode.
P. 1 2
P. 6 9
P. 8 5
P. 8 9
P.156
The flash is set to Flash Off. Deselect the Flash Off with the F
button.
P. 3 8
Batteries are running low. If using alkaline batteries, replace the
batteries with a new set. If using
rechargeable batteries, recharge or use
the AC Adapter.
P. 1 6
Even though the flash
fired, the picture is dark.
The distance to the subject is greater
than 2.1 meters in Telephoto or
greater than 2.7 meters in Wide-
angle.
Get closer to your subject and shoot. P.38
The subject is dark. Correct exposure. (Exposure correction
also changes the light quantity of the
flash.)
P. 7 6
The image is too bright. The light quantity of the flash is not
appropriate.
Move a little away from the subject or
light up the subject for shooting without
flashing.
P. 3 8
It is over-exposed. Use exposure compensation. Cancel
Exposure Time.
P. 7 1
P. 7 6
The brightness of the LCD monitor is
not appropriate.
Adjust the brightness of the LCD
Monitor.
P. 11 0
The image is too dark. The shot was taken in a dark place
while set to (Flash Off).
Deselect the Flash Off with the F button. P.38
It is under-exposed. Use exposure compensation. Set to
Exposure Time.
P. 7 1
P. 7 6
The brightness of the LCD monitor is
not appropriate.
Adjust the brightness of the LCD
Monitor.
P. 11 0
The image lacks natural
color.
The picture was shot in conditions
that are hard for Auto White Balance
to adjust to.
Add a white object to the composition.
Or use a White Balance setting other
than Auto.
P. 7 7
The date, or recording
information does not
appear.
The screen display function is set to
No Display.
Press the DISP. button and switch
display.
P. 2 7
Symptom Cause Remedy
Refer
to
149
Troubleshooting
Playback/Deleting
The brightness of the LCD
Monitor changes during
AF.
You are using it in a dark place or
when Auto Focus range and
surrounding brightness are different.
This is normal. -
There is a vertical smear
on the image.
This is a phenomenon that occurs
when a bright subject is shot. It is
called the smear phenomenon.
This is normal. -
Symptom Cause Remedy
Refer
to
Cannot Playback. Or the
Playback screen does not
come out.
The camera is not in Playback Mode. Press the Playback button. P.41
The VIDEO/AV cable is not
connected properly.
Reconnect it properly. P.47
The video format is set wrong. Set to correct format. P.119
The contents of SD
Memory Card cannot be
replayed. Or the Playback
screen does not come out.
No memory card is loaded. Or a
Memory Card with no stored images
is loaded.
Load a card with stored images. P.21
You played back a Memory Card that
was not formatted by this device.
Load a card that was formatted and
stored on by this device.
P. 2 1
P.108
You played back a Memory Card that
was not recorded normally.
Load a normally recorded card. -
The SD Memory Card's contact
surfaces are dirty.
Wipe off with a soft, dry cloth. -
There is something wrong with the
Memory Card.
Play another card and if there is nothing
wrong with it, the camera is OK. There
may be something wrong with the card,
so do not use it.
-
An image disappeared. Batteries are running low. If using alkaline batteries, replace the
batteries with a new set. If using
rechargeable batteries, recharge or use
the AC Adapter.
P. 1 6
The camera was left unattended and
unused, so Auto Power-Off shut it off.
Turn the power back on. P.24
Files cannot be deleted. The file has been set to protect. Release the protection. P.96
The SD Memory Card is "locked". Release the "Lock (write-protection)". P.19
Cannot format a Memory
Card.
The SD Memory Card is "locked". Release the "Lock (write-protection)". P.19
Symptom Cause Remedy
Refer
to
150
Other Problems
Symptom Cause Remedy
Refer
to
Cannot load the Memory
Card.
The card is facing the wrong way. Load correctly. P.21
Even when the camera's
buttons are pressed, it
does not operate.
Batteries are running low. If using alkaline batteries, replace the
batteries with a new set. If using
rechargeable batteries, recharge or use
the AC Adapter.
P. 1 6
P. 2 0
P.155
Camera malfunction. Slide the power switch to close the lens
cover once (power-off) and slide it again
to open (power-on).
P. 2 4
Remove batteries once and load them
again. Reconnect the AC adapter cable
properly, if using.
P. 2 1
P. 2 3
P.155
The date is wrong. The correct date/time are not set. Set the correct date/time. P.117
The date set has
disappeared.
The batteries were removed. If the batteries are removed for about
one week, the date setting will be lost.
Make the settings again.
P. 11 7
Auto Power-Off does not
work.
Auto Power-Off is set to OFF. Set the time for Auto Power-Off. P.112
The beep does not sound. The camera is set to silent. Mute is set at [Volume Setting]. P.114
Images do not appear on
the TV.
The video format is set wrong. Set to correct format. P.119
The cable is not connected. Reconnect the cable properly. P.47
The TV in/out switch is incorrectly set. Check that the TV in/out switch is set
correctly.
-
151
Troubleshooting
Warning Messages Under Windows XP
Service Pack 2
When software for Ricoh's digital camera is used on a PC with
Windows XP Service Pack 2 installed, the following warning
message may appear at software activation or USB connection.
With this in mind, refer to the following:
1. Check the information
provided on the message
screen to make sure that it
comes from a reputable
source, and then click the
[Unblock] button.
Caution
If you do not recognize the program, you should block it because it may be a virus. Click the
[Keep Blocking] button to prevent the program from connecting to the Internet.
152
If you clicked the [Keep Blocking] button:
Follow the steps below to check to see the Windows Firewall
settings.
1. Click [Start] and then [Control Panel].
2. Double-click [Windows
Firewall].
If [Windows Firewall] is not displayed,
click [Switch to Classic Display] at the
upper left of the window.
3. Click the [Exceptions] tab.
4. Check that the software is in
[Programs and Services].
5. Click the [Add Program] button
to add software that uses the
network.
If you clicked the [Ask Me Later] button:
Each time the program is activated, the [Critical Warning about
Windows Security] window appears. Then you can select [Unblock].
153
Appendices
A. Specifications
General
Camera Parts
Video Signal Format NTSC, PAL
Power Source Voltage Rechargeable Battery (3.7 V) x 1
External Part (AC Adapter); 3.8 V
External Dimensions Weight 100.2mm (W) x 55.0mm (H) x 25.8mm (D) (excluding projecting parts)
Weight
Camera: Approximately 150 g (Excluding the battery, SD memory card, and strap)
Accessories: Approximately 45g (Battery, SD memory card, and strap)
Operating Temperature Range 0 °C to 40 °C
Operating Humidity Range 85% or less
Storage Temperature Range -20 °C to 60 °C
Image Pickup Used Total 5.19 million pixels (effective pixels 5.02 million)
Lens
Lens 4.8 x Optical Zoom lens: F3.3 to 4.8
Focal Length F: 4.6 to 22.2 mm (35 mm equivalent, 28 to 135 mm)
Shooting distance
Approximately 0.3 mm to Ʈ from the front of the lens
Macro shooting distance
Approximately 0.01 m to
Ʈ
(Wide) or 0.13 m to
Ʈ
(Tele) from the front of the lens
Digital Zoom 3.6 times
Monitor Display Parts
Screen Size 2.5"
Type Transparent Amorphous Silicon TFT LCD
Pixel Count Approx. 114,000
White Balance AUTO/Fixed (Daylight, Overcast, Tungsten light, Tungsten light 2,
Fluorescent light, One Push)
Exposure Adjustment
Light Metering Sensitivity
Distribution
Multi Light Metering (256 segments), Center-weighted Light Metering, Spot
Metering
Exposure Compensation Exposure Compensation +/-2.0EV (1/3EV Steps)
Metering Method TTL-CCD Metering Method
Flash AE Yes (In Daylight Synchro: On)
154
Image Data Record/Replay Part
I/O Terminals
Memory Cards that can Record, Playback
Shutter Still image: 8, 4, 2, 1 to 1/2000 seconds
Movie: 1/30 to 1/2000 seconds
ISO Sensitivity AUTO, ISO64, ISO100, ISO200, ISO400, ISO800
Distance Control
AF Method Normal Shooting: External Passive / CCD method; Macro: CCD method
AF Measurement Range Normal: approx. 0.3 m - infinity. Macro: approx. 0.01 m - infinity
Internal Flash
•Method Flashmatic
Shooting Distance Approx. 0.2 to 2.7 m (W), Approx. 0.13 to 2.1 m (T) (ISO:AUTO)
Operating Modes Flash Off/Forced flash/Auto/Slow synchro/Red-eye reduction
Date Maintain Time Approx. 1 week
Pixels
Still Images 2560 X 1920, 2048 X 1536, 1280 X 960, 640 X 480
Text 2560 X 1920, 2048 X 1536
Movies 320 X 240, 160 X 120
File Formats
Still Images Compressed; JPEG (Exif Ver.2.21))
Text TIFF (MMR Method ITU-T.6)
Movies AVI (Open DML Motion JPEG Format Compliant)
Sounds WAV (Exif Ver.2.21 µ law)
Camera File System
Standard
DCF (DCF is an abbreviation for "Design rule for Camera File system", a JEITA
standard)
Compression Format JPEG Baseline Format Compliant (Still, Movie)
Image Size
2560 X 1920 N; approx. 1032 KB/Screen, F; approx. 1806 KB/ Screen
2048 X 1536 N; approx. 673 KB/Screen, F; approx. 1346 KB/ Screen
1280 X 960 N; approx. 326KB/Screen, F; approx. 626KB/ Screen
640 X 480 N; approx. 83KB/ Screen
DC In 3.8 V (AC Adapter)
Video Out 1.0 Vp-p (75)
Memory Type SD Memory Card, Multi-Media Card
155
B. Optional Accessories
The Caplio R2 can be used with the items (sold separately) listed
below.
Using the AC Adapter (sold separately)
When shooting or viewing still images for a long time, or when
connecting to your computer, using the AC Adapter (sold separately)
is recommended.
If you have already used this camera, make sure it is turned off
before loading the AC Adapter Battery.
1. Open the battery/card cover.
2. Insert the AC Adapter Battery.
3. Open the power (DC input) cable
cover and take the cable out.
4. Close the battery/card cover and
slide it back into place.
5. Plug the power cord into an
outlet.
Item Model Remarks
AC Adapter AC-4b Used for power supply from a home outlet to the camera.
PC Card Adapter FM-SD53 For when you want to load an SD Memory Card directly
into your computer's PC Card Slot.
Rechargeable Battery DB-50 Available for this camera.
Rechargeable Battery Set BS-5 Includes the Rechargeable Battery (DB-50) and Battery
Charger.
156
Removing the AC Adapter
Make sure the camera is turned off before removing the AC Adapter.
1. Unplug the power plug from the outlet.
2. Slide the battery/card cover toward the rear side to open it.
3. Remove the battery.
4. Close the battery/card cover and slide it back into place.
Caution
Be sure to firmly attach cables and plug in cords.
When you are not using the camera, unplug the AC Adapter from the camera and the
power outlet.
While in use, if you detach the AC Adapter or unplug it from the outlet, data may be lost.
When using the AC Adapter, the battery level indication may not reach the full area.
C. Combination of Scene Mode and Function
Depending on the Scene Mode, the way functions work may differ
from when in normal shooting mode. Refer to the table below.
Mode Name Flash Macro Shooting
PORTRAIT Initial setting: Flash Off Disabled
SPORTS Initial setting: Flash Off Disabled
LANDSCAPE Fixed on Flash Off Disabled
NIGHTSCAPE Forced flash is disabled Disabled
Initial setting: Auto
TEXT MODE Fixed on Flash Off Enabled
HIGH SENSITIVITY Fixed on Flash Off Enabled
157
D. Menu Items By Mode
Shooting Menu (Movie Mode)
Shooting Menu (Scene Mode, except in Text Mode)
Shooting Menu (Text Mode)
Setting Option Refer to
MOVIE SIZE [320], 160 P.60
FRAME RATE 15 FPS, [30 FPS] P.90
FOCUS [AF], MF, SNAP, P.6 2
WHITE BALANCE
[AUTO], (Daylight), (Overcast), (Tungsten light),
(Tungsten light 2), (Fluorescent light), (One Push)
P.7 7
Setting Option Refer to
PIC QUALITY/SIZE F2560, N2560, F2048, N2048, F1280,[N1280], N640 P.60
FOCUS [AF], SNAP, (except in Landscape) P.62
IMAGE WITH SOUND ON, [OFF] P.74
DATE IMPRINT [OFF], DATE, TIME P.75
EXPOSURE COMP. -2.0 to +2.0 P.76
WHITE BALANCE
[AUTO], (Daylight), (Overcast), (Tungsten light),
(Tungsten light 2), (Fluorescent light), (One Push)
P.7 7
SLOW SHUTTER LMT [OFF], ON P.80
Setting Option Refer to
DENSITY DEEP, [NORMAL], LIGHT P.82
SIZE 2560, [2048] P.60
IMAGE WITH SOUND ON, [OFF] P.74
DATE IMPRINT [OFF], DATE, TIME P.75
SLOW SHUTTER LMT [OFF], ON P.80
158
E. Functions Whose Defaults will be
Restored upon Power-off
Power-off may reset some function settings to their defaults. The table below
indicates whether or not the function will be reset to its defaults upon power-off.
Mode Function The current setting is kept:O, Restored:X
Setup DATE SETTINGS O
AUTO POWER OFF O
BEEP SOUND O
SEQUENTIAL NO. O
LCD CONFIRM. O
VOL. SETTINGS O
LCD BRIGHTNESS O
LANGUAGE O
VIDEO OUT MODE O
ADJ. BUTT. SET. O
STEP ZOOM O
USB CONNECTION O
SHTG STGS WARNG. O
Shooting CONT. MODE X
EXPOSURE COMP. O
WHITE BALANCE O
COLOR DEPTH O
PIC QUALITY/SIZE O
FOCUS O
PHOTOMETRY O
ISO SETTING O
SHARPNESS O
AUTO BRACKET X
TIME EXPOSURE O
INTERVAL X
DATE IMPRINT O
IMAGE WITH SOUND X
SELF-TIMER X
FLASH O
MACRO SHOOTING X
159
F. Number of Images That Can be Stored in
Internal Memory/SD Memory Card
The following table shows the approximate number of images that can be
recorded onto an SD memory card at various image size and picture quality
settings.
DENSITY (Text Mode) O
SLOW SHUTTER LMT O
ENLGE PHOTO ICON O
MOVIE SIZE (Movie Mode) O
SIZE (Text Mode) O
Maximum brightness O
Playback VOLUME O
Mode
Picture
Quality
Image Size IN 32MB 64MB 128MB 256MB 512MB 1GB
Still
Image
F 2560 X 1920 14 15 31 63 126 255 491
N 2560 X 1920 24 25 52 105 210 424 816
F 2048 X 1536 19 20 41 83 166 334 643
N 2048 X 1536 37 39 80 163 325 654 1259
F 1280 X 960 36 38 79 159 318 641 1233
N 1280 X 960 69 72 149 301 600 1209 2324
N 640 X 480 300 315 645 1304 2600 5239 10072
TEXT
MODE
2560 X 1920 37 39 80 163 325 654 1259
2048 X 1536 69 72 149 301 600 1209 2325
Movie 15FPS 320 X 240 1 min
23 s
1 min
27 s
2 min
57 s
5 min
59 s
11 min
56 s
24 min
4 s
46 min
17 s
30FPS 320 X 240 42 s 44 s 1 min
30 s
3 min
2 s
6 min
4 s
12 min
13 s
23 min
30 s
15FPS 160 X 120 5 min
1 s
5 min
18 s
10 min
51 s
21 min
57 s
43 min
44 s
88 min
7 s
169 min
27 s
30FPS 160 X 120 2 min
38 s
2 min
48 s
5 min
45 s
11 min
37 s
23 min
10 s
46 min
42 s
89 min
48 s
Sound
(Voice
Memo)
61 min
32 s
64 min
38 s
132 min
13 s
267 min
17 s
532 min
38 s
1073
min 11 s
2063
min 27 s
Mode Function The current setting is kept:O, Restored:X
160
Note
The number of remaining shots displayed on the LCD monitor may differ from the actual
number of shots, depending on the subject.
The maximum number of pictures and other numeric values may be different even for cards
of the same capacity if the manufacturer, type, or shooting conditions are different.
The continuous shooting (recording) time depends on the card type, capacity, and
performance.
G. Using Your Camera Abroad
AC Adapter (Model AC-4b)
Can be used in regions with a current of 120V, 50Hz/60Hz.
If you are going to travel to a country that uses a different shaped wall outlet/plug, please consult your travel
agent on a plug adapter suitable for wall outlets in your country of destination.
Warranty
This product is for domestic use. The warranty is only valid domestically.
Should the product fail or malfunction while you are abroad, the manufacturer assumes no responsibility for
servicing the product locally or bearing the expenditure incurred therefore.
Using Playback on Television in other Regions
Playback is possible on televisions (or monitors) equipped with a video input terminal. Please use the video
cable provided.
This camera is compatible with both NTSC and PAL television formats. Switch the video format on the camera
to match the television environment in the region.
When you go overseas, set your camera to the local video format.
161
H. Cautions on Use
This product is for domestic use. The warranty is only valid domestically.
Should the product fail or malfunction while you are abroad, the
manufacturer assumes no responsibility for servicing the product locally or
bearing the expenditure incurred therefore.
Be sure not to drop or apply any sudden force to the camera.
Firing the flash consecutively may heat the firing unit. Do not fire it
consecutively more than necessary.
Do not fire the flash near eyes. It could cause visual impairment (particularly
for infants).
Do not fire the flash near the driver of a vehicle to avoid causing accidents.
The batteries may become hot after extended use. Touching the batteries
immediately after use could result in burns to your fingers.
If the LCD monitor or panel is exposed to sunlight, they may become
washed out and images may become hard to view.
The LCD monitor and panel may contain some pixels that do not remain lit
up continually in part or at all. Also, the brightness may become uneven
because of the characteristics of LCDs. These are not failures.
While you are carrying the camera, be careful not to hit it against other
objects.
In an environment where the temperature changes suddenly, condensation
may occur in the camera, resulting in troubles such as fogging of the glass
surface or malfunctions of the camera. If this occurs, place the camera in a
bag to slow the temperature change as much as possible. Take it out of the
bag after the temperature difference from the atmosphere has decreased to
a fairly small amount.
To avoid damaging the connectors, do not put any objects into the camera's
microphone or speaker holes.
Note
Conditions in which condensation may easily occur:
When the camera is moved to an environment where the temperature differs greatly.
In humid places
In a room immediately after being heated, or when the camera is exposed directly to cooled
air from an air-conditioner or another similar appliance
162
I. Care and Storage
Care
Please note that if fingerprints, dirt, etc. get onto the lens, picture quality will
suffer.
When dust or dirt does get on the lens, do not touch it directly with your
fingers, and either use a blower (available in stores) to blow it off, or a soft
cloth to gently dust it off.
After use at the beach or around chemicals, wipe it off particularly carefully.
In the unlikely event that your camera fails to work properly, please consult
your Ricoh Repair Center.
There are high voltage circuits in this camera. As this is dangerous, do not
dismantle this camera under any circumstances.
Do not get volatile substances, such as thinner, benzene, or pesticides on
your camera. This may cause a change in quality, paint to peel, etc.
As the surface of the LCD Monitor is easily scratched, do not rub hard
objects against it.
Please clean the surface of the LCD Monitor with solvents available on the
market specially for cleaning LCD display surfaces. Gently wipe with a soft
cloth dampened with a little cleaner.
Storage
Please avoid storing your camera in the following kinds of places, as
breakdown may result.
In high heat and humidity, or where there is severe change in temperature
or humidity.
Places with a lot of dust, dirt or sand.
Places with severe vibration.
In places of direct contact with vinyl products, rubber or chemicals, such
as insect repellent, etc.
Places with strong magnetic fields (monitors, next to strong magnets,
etc.).
If you are using a battery or batteries, remove them if you are not going to
use the camera for a long period of time.
Precautions regarding care of your camera
1. Be sure to turn the power off.
2. Remove the batteries or AC Adapter before caring for your camera.
163
J. Error Messages
If an error message is displayed on the LCD Monitor, take the
corresponding action.
Error Message Cause and Action Page
INSERT CARD No card is loaded. Insert a card. P.21
SET THE DATE ON THE SETUP
MENU
The date is not set. Set the date. P.117
FILE NUMBER OVER The file number limit has been exceeded. Please use
another card, or delete unwanted files.
P.11 6
UNMATCHED FILE The camera cannot display this file. Check the file contents
on your computer, and then delete the file.
-
INSUFFICIENT MEMORY.
CONTINUE?
Because there is not sufficient capacity on the card, all the
files cannot be copied. Use another card.
P.1 9
PROTECTED You are trying to delete a protected file. P.96
THE CARD IS WRITE-
PROTECTED.
The card is "Locked (write-protection)". Unlock the card. P.19
PRINT SETTINGS CANNOT BE
SET FOR THIS FILE
This file (movies and other) cannot be selected for printing. -
INSUFFICIENT MEMORY Files cannot be stored. Make sure there is enough free
space, or delete files.
P.49,
P.108,
P.109
The image print number limit has been exceeded. Select an
image and set the number to 0.
-
FORMAT INTERNAL MEMORY It is necessary to format internal memory. P.109
FORMAT CARD The card is not formatted.Format the card. P.108
CARD ERROR Please reformat. If, after doing so, the error message still
appears, the card may be faulty. Do not use the card.
P.108
WRITE TO CARD Writing file to memory. Wait until writing finishes. -
NO FILE There are no files that can be played back. -
CANNOT RECORD The Number of remaining shots is 0. Switch to another card
or internal memory.
-
INSUFFICIENT MEMORY
CANNOT RECORD
Files cannot be stored. Make sure there is enough free
space, or delete files.
P.49,
P.108,
P.109
164
K. Warranty and Servicing
1. This product is backed by a limited warranty. During the warranty period mentioned in the Warranty
supplied with your camera, any defective parts will be repaired free of charge. In the event of a camera
malfunction, contact the dealer from which you purchased the camera or your nearest Ricoh service
office. Please note that you will be not be reimbursed for the cost of bringing the camera to the Ricoh
service office.
2. This warranty does not cover any damage resulting from:
1)failure to follow the instructions in the instruction manual;
2)repair, modification or overhaul not conducted by an authorized service center listed in the instruction
manual;
3)fire or natural disaster;
4)Improper storage, such as exposing the camera to high temperatures, humidity, or moth-balls; storing it
with a leaking battery; storing the camera in a dirty condition so that it becomes moldy; or otherwise
insufficiently caring for the camera;
5)Submergence; exposure to floods or spilled alcohol or other beverages; allowing sand or mud to enter
the camera; exposure to physical shocks; or dropping the camera.
3. After the warranty period has passed, you will be liable for all repair fees, including those incurred at an
authorized service center.
4. You will be liable for all repair fees, even within the warranty period, if the warranty card is not attached or
if the distributor's name or the purchase date have been changed or are not indicated on the card.
5. Expenses for overhaul and thorough inspection by special request of the customer will be charged to the
customer, whether or not they are incurred during the warranty period.
6. This warranty only applies to the camera and not to the accessories, such as the case and strap, nor does
it apply to the battery and other consumables provided.
7. Any consequential damages arising from failure of the camera, such as expenses incurred in taking
pictures or loss of expected profit, will not be reimbursed whether they occur during the warranty period or
not.
8. The warranty is only valid domestically.
*The above provisions refer to repairs offered free of charge, and do not limit your legal rights.
*The intention of the above provisions is also described in the warranty card provided with this camera.
9. Parts essential to the servicing of the camera (that is, components required to maintain the functions and
quality of the camera) will be available for a period of five years after the camera is discontinued.
10. Please note that if the camera is seriously damaged by flooding, submergence, infiltration of sand or mud,
violent shocks or dropping, it may not be repairable, and restoration to its original condition may be
impossible.
Note
Before sending the camera in for repair, check the battery and read the instruction manual again to ensure proper
operation.
Some repairs require a significant amount of time to be completed.
When sending the camera to a service center, please include a note which describes the defective part and the
problem as precisely as possible.
Remove all accessories not related to the problem before sending the camera to the service center.
Before taking any important pictures (such as at weddings, on trips abroad, etc.), test the camera to check operation
and ensure proper functioning. We recommend that you keep this manual and spare battery on hand.
This warranty does not apply to data stored on an SD Memory Card or in internal memory.
165
INFORMATION TO THE USER
USA FCC Part15 Class B
The equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, then
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help. (FCC 15.105B)
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment. (FCC 15.21)
Properly shielded and grounded cables and connectors must be used for connection to a
host computer in order to comply with FCC emission limits. (FCC 15.27)
An AC adapter with a ferrite core must be used for RF interference suppression.
COMPLIANCE INFORMATION STATEMENT
Product Name: DIGITAL CAMERA
Model Number: Caplio R2
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
RICOH CORPORATION
5 Dedrick Place, West Caldwell NJ, 07006 Tel.: 1-800-225-1899
Note to Users in Canada
Note: This Class B digital apparatus complies with Canadian ICES-003
Remarque Concernant les Utilisateurs au Canada
Avertissement: Cet appareil numerique de la classe Best conforme a la norme NMB-003 du
Canada
IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS
DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY
FOLLOW THESE INSTRUCTIONS.
Declaration of Conformity
"The Product complies with the requirements of the EMC Directive
89/336/EEC."
166
Index
A
AC Adapter ....................................11, 155
Acrobat Reader ...................................129
ADJ BTN.SET. .....................................111
ADJ. Button ...........................................57
Auto Bracket ..........................................68
AUTO POWER OFF ............................112
Auto Power Off ......................................24
AV Cable .........................................10, 47
B
BEEP SOUND .....................................113
Browse CD-ROM .................................129
C
Caplio Software CD-ROM .....11, 128, 139
CONT (Multi-Shot) .................................85
COPY TO CARD .................................103
D
DATE IMPRINT .....................................75
DENSITY ...............................................82
Digital Zoom ..........................................36
Direct Print .............................................52
DirectX .................................................129
DPOF .....................................................99
E
Erasing ..................................................49
Error Message .....................................163
EXPOSURE COMP. ..............................76
F
Flash ......................................................38
FOCUS ..................................................62
Focus-lock .............................................34
FORMAT - CARD ................................108
FORMAT - INT. MEM. .........................109
Full-press ...............................................31
G
Grid Guide .............................................27
H
Half-press ..............................................32
Handstrap ..............................................10
How to Hold the Camera .......................29
I
Image Size .............................................60
IMAGE WITH SOUND .......................... 74
INTERVAL ............................................ 72
ISO SETTING ....................................... 79
L
LCD BRIGHTNESS ............................ 110
LCD CONFIRM. .................................. 115
M
Macro-Mode .......................................... 37
Magnifying Images ................................ 46
Mounter ....................................... 129, 140
M (Memory-reversal) Multi-Shot ........... 85
N
Number of Images That Can be Stored in
Internal Memory/SD Memory Card ..... 159
P
Packing List .......................................... 10
PHOTOMETRY .................................... 65
PIC QUALITY/SIZE .............................. 60
PictBridge ............................................. 52
Picture Quality Mode ............................ 60
PROTECT ............................................. 96
R
Rechargeable Battery ..................... 10, 11
RESIZE ............................................... 102
RESTORE DEFAULTS ......................... 81
RICOH Gate La .......................... 129, 140
S
Scene .................................................... 39
SD Memory Card .................................. 19
Self-timer .............................................. 84
SEQUENTIAL NO. .............................. 116
Sharpness ............................................. 66
Shooting Menu (Movie Mode) ............. 157
SLIDE SHOW ....................................... 95
SLOW SHUTTER LMT ......................... 80
Specifications ...................................... 153
Synchro-Monitor Mode ......................... 27
S (Stream) Multi-Shot ........................... 85
T
Thumbnail Display ................................ 45
TIME EXPOSURE ................................ 71
Trouble ................................................ 146
Troubleshooting .................................. 146
U
Uninstalling ......................................... 137
167
USB Cable .............................................10
USB Driver ...................................129, 140
V
Voice Memo ...........................................92
W
Warranty and Servicing .......................164
WAV file .................................................92
White Balance .......................................77
White Balance Bracket ..........................69
WIA Driver ...........................................129
Z
Zoom .....................................................36
168
Telephone Support Numbers in Europe
UK (from within the UK) 02073 656 580
(from outside of the UK) +44 2073 656 580
Deutschland (innerhalb Deutschlands) 06331 268 438
(außerhalb Deutschlands) +49 6331 268 438
France (à partir de la France) 0800 91 4897
(en dehors de la France) +49 6331 268 409
Italia (dall’Italia) 02 696 33 451
(dall’estro) +39 02 696 33 451
Espa (desde España) 91 406 9148
(desde fuera de Espa) +34 91 406 9148
Nederland (binnen Nederland) 0800 022 9494
(vanuit het buitenland) +49 6331 268 443
http://www.service.ricohpmmc.com/
From environmental friendliness to environmental
conservation and to environmental management
Ricoh is agressively promoting environment-
friendly activities and also environment
conservation activities to solve the great subject
of management as one of the citizens on our
precious earth.
To reduce the environmental loads of digital
cameras, Ricoh is also trying to solve the great subjects of "Saving energy by reducing power
consumption" and "Reducing environment-affecting chemical substances contained in products."
If a problem arises
First of all, see "Troubleshooting" in this manual. If the issues still persist, please contact a Ricoh office.
Ricoh Offices
Ricoh Company, Ltd. 3-2-3, Shin-Yokohama Kohoku-ku, Yokohama-shi 222-8530, Japan
http://www.ricoh.co.jp/r_dc
Ricoh Corporation 5 Dedrick Place West Caldwell, NJ 07006, USA
1-800-22RICOH
http://www.ricoh-usa.com
RICOH EUROPE B.V. (EPMMC) Oberrather Straße 6, D-40472, Düsseldolf, Germany
http://www.ricohpmmc.com
RICOH UK LTD. (PMMC UK)
Ricoh House, 1 Plane Tree Crescent, Feltham, Middlesex, TW13 7HG, England
RICOH FRANCE S.A. (PMMC FRANCE)
383, Avenue du Général de Gaulle – BP 307-931-13 Clamart Cédex, France
RICOH ESPANA, S.A. (PMMC SPAIN) Av. Litoral Mar, 12-14, 08005 Barcelona, Spain
RICOH EUROPE B.V. (PMMC BENELUX) Koolhovenlaan 35, 1119 NB Schiphol-Rijk, The Netherlands
Ricoh Italia S.p.A. (PMMC ITALY) via Ponchielli,3 20063 Cernusco S/N Milano Italy
RICOH HONG KONG LIMITED
Personal Multimedia Products Center
21/F., Tai Yau Building, 181 Johnston Road, Wan Chai, Hong Kong
Ricoh Australia Pty. Ltd. 8 Rodborough Road Frenchs Forrest, N.S.W.2086 Australia
http://www.ricoh.com.au
About ImageMixer
North America (Los Angeles): TEL: +1-213-341-0163
Europe (U.K.): TEL: +44-1489-564-764
Asia (Philippines): TEL: +63-2-438-0090
China: TEL: +86-21-5450-0391
Registration time: 9:00 - 17:00
*L722 2971B*
Ricoh Company, Ltd.
Minato-ku, Tokyo 107-8544, Japan
2005 March
EN USA GB GB AE AE
Printed in China
161

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ricoh Caplio R2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Ricoh Caplio R2

Ricoh Caplio R2 Bedienungsanleitung - Deutsch - 172 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info