639647
26
Zoom out
Zoom in
Vorherige Seite
1/30
Nächste Seite
Glossary of 3D printing vocabulary
24
5. Glossary of 3D printing vocabulary
5.1 3D printing vocabulary
Slicing what?! We know that the vocabulary of 3D printing may be quite new to you. That’s why we
are proving you with a short glossary below.
Extruder
The extruders of your Creatr HS can be found in your printhead. They handle the feeding and ex-
truding of the laments. They consist of two assemblies: a cold end to pull and feed the thermoplas-
tic from the spool, and a hot end (nozzle and hot end) that melts and extrudes the thermoplastic.
The Creatr HS is tted with a dual extrusion system allowing it to use two plastics in the same
print.
Extruding
Extruding is the term for the process during which lament feeds through the nozzle. It is the op-
posite of retracting.
Extruder handle
The extruder handles are the two parts at the back of your Creatr HS that you pull out to feed the
lament through.
FDM or FFF
Fused Deposition Modelling (FDM) or Fused Filament Fabrication (FFF) is the 3D printing tech-
nique that is used in your Creatr HS. FDM/FFF works on an additive principle by laying down mate-
rial in layers; a plastic lament is unwound from a coil and supplies material to produce a part.
Filament
Filament is the material that is used by the 3D printer to build the 3D object. The Creatr HS uses
spools of lament with a thickness of 1.75mm of a variety of plastics and composites. For an over-
view of different laments and their characteristics, revert to page ..
Filament drive unit
This is the part at the back of the printer with the quick release knob which is designed for easy
feeding of the lament.
Filament guiding tube
These are the white tubes that guide your lament from the feeding hole in the bottom all the way
to the extruder.
Gcode
The computer language that the Creatr HSunderstands and receives its instructions from. The
Simplify3d software is used to create a gcode out of a stl le. The instructions encrypted within a
gcode can range from moving the printing head in X and Y direction to setting the temperature of
the hot-end.
26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ricoh Creatr HS - Leapfrog wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Ricoh Creatr HS - Leapfrog

Ricoh Creatr HS - Leapfrog Bedienungsanleitung - Deutsch - 30 seiten

Ricoh Creatr HS - Leapfrog Bedienungsanleitung - Holländisch - 30 seiten

Ricoh Creatr HS - Leapfrog Bedienungsanleitung - Französisch - 30 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info