Bedienungsanleitung Ricoh PJ X5371N (Seite 7 von 206) (Englisch)

639316

Zoom out

Zoom in

Vorherige Seite

1/206

Nächste Seite

Important Information

Fire and Shock Precautions

• Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the build-up of heat inside your

projector. Allow at least 4 inches (10cm) of space between your projector and a wall.

• Do not try to touch the exhaust vent on the left front (when seen from the front) as it can become heated while the

projector is turned on and immediately after the projector is turned off. Parts of the projector may become temporarily

heated if the projector is turned off with the Power button or if the AC power supply is disconnected during normal

projector operation.

Use caution when picking up the projector.

• Prevent foreign objects such as paper clips and bits of paper from falling into your projector. Do not attempt to retrieve

any objects that might fall into your projector. Do not insert any metal objects such as a wire or screwdriver into your

projector. If something should fall into your projector, disconnect it immediately and have the object removed by a

qualied service personnel.

• Do not place any objects on top of the projector.

• Do not touch the power plug during a thunderstorm. Doing so can cause electrical shock or re.

• The projector is designed to operate on a power supply of 100-240V AC 50/60 Hz. Ensure that your power supply

ts this requirement before attempting to use your projector.

• Do not look into the lens while the projector is on. Serious damage to your eyes could result.

• Keep any items such as magnifying glass out of the light path of the projector. The light being projected from the

lens is extensive, therefore any kind of abnormal objects that can redirect light coming out of the lens, can cause

unpredictable outcome such as re or injury to the eyes.

• Do not place any objects, which are easily affected by heat, in front of a projector exhaust vent.

Doing so could lead to the object melting or getting your hands burned from the heat that is emitted from the exhaust.

• Do not splash water over the projector. Doing so can cause electrical shock or re. If the projector gets wet, turn off

the projector, unplug the power cord and have the projector serviced by a qualied service personnel.

• Handle the power cord carefully. A damaged or frayed power cord can cause electric shock or re.

- Do not use any power cord other than the one supplied with the projector.

- Do not bend or tug the power cord excessively.

- Do not place the power cord under the projector, or any heavy object.

- Do not cover the power cord with other soft materials such as rugs.

- Do not heat the power cord.

- Do not handle the power plug with wet hands.

• Turn off the projector, unplug the power cord and have the projector serviced by a qualied service personnel under

the following conditions:

- When the power cord or plug is damaged or frayed.

- If liquid has been spilled into the projector, or if it has been exposed to rain or water.

- If the projector does not operate normally when you follow the instructions described in this user’s manual.

- If the projector has been dropped or the cabinet has been damaged.

- If the projector exhibits a distinct change in performance, indicating a need for service.

• Disconnect the power cord and any other cables before carrying the projector.

• Turn off the projector and unplug the power cord before cleaning the cabinet or replacing the lamp.

• Turn off the projector and unplug the power cord if the projector is not to be used for an extended period of time.

• When using a LAN cable (only models with the RJ-45 LAN port):

For safety, do not connect to the connector for peripheral device wiring that might have excessive voltage.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ricoh PJ X5371N Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ricoh PJ X5371N

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info