288841
3
Zoom out
Zoom in
Vorherige Seite
1/4
Nächste Seite
Ricoh RDC-4300 Frequently Asked Questions
How do I capture images with sound or sound alone? The RDC-4300 also offers a unique recording feature: the
ability to record sound in addition to images. Modes
offered are Picture with Sound, Sound Alone, and Text with
Sound. See Page 114 for chart outlining number of
images/minutes recorded on specific SmartMedia card
size.
Setting Sound, Picture+Sound & Text+Sound Modes
Turn mode selector dial to 1 (Record).
Turn on camera power.
Press the MENU button.
Scroll through the on-screen menu choices using the
ZOOM toggle button to select the RECORDING MODE
option.
Press the DISPLAY/ENTER button.
Slide the ZOOM toggle button to select the desired
recording mode: Picture, Picture + Sound, Sound, Text
or Text + Sound.
Press the MENU button.
The LCD monitor will display the icon of the selected
recording mode in the upper left corner of the LCD
monitor.
The camera is ready to capture in the desired mode.
(Ref. Page 50 of Operation Manual)
How do I adjust the white balance settings? The RDC-4300 offers automatic white balance and a
manual override feature. The factory default setting is
automatic. Within the manual selections, the user can
select one of five options: Daylight, Florescent or Tungsten
light modes as well as Sepia (for an antique photo effect)
and Black and White image capture. These manual
overrides are set as follows:
SETTING WHITE BALANCE
Turn mode selector dial to 1 (Record).
Turn on camera power.
Press the MENU button.
Scroll through the on-screen menu choices using the
ZOOM toggle button to WHITE BALANCE.
Press the DISPLAY/ENTER button.
Using the ZOOM toggle button, scroll through the on-
screen menu choices until the 8aligns with the desired
mode.
Press the MENU button.
Press the MENU button again.
You are now ready to begin capturing images with the
desired effect.
(Ref. Page 61 of Operation Manual)
How do I turn the LCD on/off? The LCD monitor is required for capturing and playing back
images on the RDC-4300. To conserve power, the factory
default setting is at automatic power off (shuts off camera
if unused after 5 minutes). This factory setting can be
changed as follows:
Power Saving Mode
Turn mode selector dial to 1 (Record).
Turn on camera power.
Press the MENU button.
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ricoh rdc 4300 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Ricoh rdc 4300

Ricoh rdc 4300 Zusatzinformation - Englisch - 1 seiten

Ricoh rdc 4300 Zusatzinformation - Englisch - 16 seiten

Ricoh rdc 4300 Zusatzinformation - Englisch - 8 seiten

Ricoh rdc 4300 Zusatzinformation - Englisch - 11 seiten

Ricoh rdc 4300 Zusatzinformation - Englisch - 6 seiten

Ricoh rdc 4300 Zusatzinformation - Englisch - 8 seiten

Ricoh rdc 4300 Zusatzinformation - Englisch - 13 seiten

Ricoh rdc 4300 Bedienungsanleitung - Englisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info