Bedienungsanleitung Rika Induo II (Seite 14 von 28) (Englisch)

744678

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

6. TECHNOLOGY AND SAFETY FUNCTIONS

The technological advances in your new combi stove are the result of years of

testing and practical experience. The practical advantages of your pellet/log

stove are convincing:

The range of operating modes leaves nothing to be desired. The automatic fuel

detection means the operating mode can be changed at any time (simply add

logs during pellet operation or ignite logs with the pellet burner).

Manually regulated currentless log operation is also possible. This ensures

faultless operation even in the case of longer power cuts.

Operating comfort

The microprocessor-controlled combustion regulation optimises the interaction

of ﬂue gas blower, air ﬂap position and screw using the current combustion

chamber temperature. This guarantees optimum combustion and operating

status in both pellet and log operation.

All function can be regulated centrally using the integrated touch display. The

intuitive graphic interface permits easy operation; all the settings can be made

quickly and simply.

Top efficiency - lowest emissions

A very great heat exchange surface together with optimum combustion air

control leads to excellent fuel utilisation.

Fine continuous pellet dosing in an optimised burner pot made of high-quality

grey cast iron leads to virtually complete combustion with very good exhaust

gas values - and this is guaranteed in every operating phase.

The combination of temperature-controlled automatic air regulation and

optimised wood retainer geometry enable combustion with minimum emissions

at top efﬁciency in log operation.

Note

During operation, the ﬂame noise, pellets dropping and actuation of the

electronic components are audible due to the automatic control.

Note

The innovative technology of our combination stove INDUO offers you a

maximum of heating comfort, depending on the availability of the fuel the

stove can be heated with pellets and / or logs without any modiﬁcation.

Both cases are solid fuels that can cause a fogging of the door glass during

the combustion, particularly with the very ﬁne ash from wood pellets.

By external inﬂuences such as chimney draft or pellet quality this coating can

be very bright or dark black (especially with low power ). This is a natural

process and is not a shortage.

We therefore recommend regular cleaning of the door glass, just because

soot is an excellent insulator and thus the heat dissipation can be reduced.

If the stove is heated according to its function in the combined operation, a

signiﬁcant improvement can be achieved due to the higher temperatures in

log wood mode.

Burnback and flue gas flaps

The combi stove safety concept is based on double safeguards. If faultless

operation is no longer ensured due to a component defect or power cut,

the burnback ﬂap in the pellet chute is released. This directly interrupts the

connection between the pellet container and push in screw. Thus preventing

pellet burnback. Closing the burnback ﬂap at the same time opens the ﬂue gas

ﬂap thus ensuring safe burning off of the fuel in the combustion chamber.

Note

Check with every maintenance / cleaning the correct operation of the ﬂue

ﬂaps.

Overheating

A safety temperature limiter (STL) switches the stove off automatically on

overheating. Once the stove has cooled, the STB at the stove rear must be

unlocked manually (pressed). The stove is ready for operation again after

acknowledging the error message at the touch display and activating the

burnback and ﬂue gas ﬂap (see ACTIVATING THE BURNBACK AND FLUE GAS

FLAP). The operating mode set is retained.

Note

Maintenance and cleaning work must be performed if overheating occurs! If

this error recurs, operation without danger is no longer guaranteed; notify

customer service immediately.

Low-temperature shutdown

The unit switches off if the stove cools below a minimum temperature. This

switch-off may occur if pellet ignition is delayed.

Electrical excess current protection

The stove has a main fuse (at the rear) to protect against excess current.

Automatic cleaning cycle

The speed of the ﬂue gas fan is increased every hour for a short period to blow

ash from the burn pot, increasing the operational safety. The status indicator

CLEANING appears on the display.

Every 5 hours (interval adjustable) an additionally automatic cleaning cycle

is performed. The stove stops, the automatic cleaning tilts the grid and then

re-ignites the stove. The status indicator CLEANING appears on the display

continuously. The cleaning procedure with tilting the grid is to convey ash and

clinker from the burn pot into the ash drawer.

Note

At runtime of the cleaning cycle occures a noise due to the turning grid (stove

start or big cleaning).

Note

This additional function does not replace a manual cleaning as described in

CLEANING and MAINTENANCE, as this is absolutely necessary to do regularly.

Component monitoring

All the electrical components used are continuously monitored during operation.

If a component is defective or can no longer be actuated correctly, then

operation is stopped and a warning or error message is issued (see MANUAL

TOUCH DISPLAY).

Auger motor monitoring

Too long or wet pellets as well as pellets with too high dust content (see

BRIEF INFORMATION ON FUEL PELLETS) can cause so-called “auger jammers”

in the auger channel. This may also happen if the pellets accumulate in the

burn pot and the backlog reaches into the chute. The auger motor reacts in

both cases with an increased current consumption, which causes the error

message: INSERTION MOTOR JAMMED. The stove will be stopped. Please call

the customer service immediately.

Rika Induo II Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Rika Induo II

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info