744718
10
Zoom out
Zoom in
Vorherige Seite
1/12
Nächste Seite
6. ERRORS
Note
The fault indicator will flash red.
For recurring error messages the customer service must be informed immediately!
Display Meaning Actions to be taken
Fo3
The automatic ignition failed. Repeat the ignition process, possibly add more
chipboard or an entire block of fire lighters.
Check chimney draft.
Use dry wood.
Fo4
The air flaps cannot be completely closed. Check to see if anything is blocking the air
flaps, check the function of the electric lifting
magnet (when activated you can hear a
“clack”).
Fo6
The combustion chamber door is open for
more than three minutes during heating.
The door contact switch is defective.
The combustion chamber door may only be
opened briefly to refill during heating. Close the
door again immediately.
Check the function of the switch: ease of
contact, audible clunk while pressing.
Fo7
The temperature sensor measures wrong values.
The temperature sensor is defective.
Check if the temperature sensor is very dirty
or sooty and clean it carefully (see CLEANING
AND MAINTENANCE).
Fo8
The air flap motor cannot reach the specified
position.
Check to see if anything is blocking the air
flaps.
Note
If an error message occurs, remove first the reason and then acknowledge the error by pressing the function button more than 2 seconds.
7. ADVICES
Tip
These displays only appear briefly when you press a button or when the child safety lock was activated.
Display Meaning Actions to be taken
HOT
The selected function cannot be executed because
the stove temperature is too high.
Allow the stove to cool down to room
temperature, then select the desired function
(for example air flaps close)
A selected function cannot be executed because
the combustion chamber door is open.
Close combustion chamber door!
This should only be opened briefly to add more
fuel.
The display is locked, the child-lock is activated. Press the Plus and Menu buttons simultaneously
to unlock.
The confirmation of the cancellation takes place
with the short display UNLOCK.
10
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

rika-rikatronic-4-v1.02

Suche zurücksetzen

  • Mein rikatronik Ofen zeigt ständig Fehlermeldung F 08.Wie soll ich mich verhalten. Eingereicht am 10-12-2023 17:42

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Rika Rikatronic 4 V1.02 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Rika Rikatronic 4 V1.02

Rika Rikatronic 4 V1.02 Bedienungsanleitung - Deutsch - 12 seiten

Rika Rikatronic 4 V1.02 Bedienungsanleitung - Holländisch - 12 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info