Bedienungsanleitung Ritter fondo 1 (Seite 15 von 81) (Alle Sprachen)

713248

Zoom out

Zoom in

Vorherige Seite

1/81

Nächste Seite

Unfold the illustrations at the front

and back of this manual.

Please read these instructions

thoroughly before you start to use

the appliance. Keep these operat-

ing instructions in a safe place

and ensure that they are included

with the appliance if passing it on

to a third party.

Alternatively, the current operat-

ing instructions are available at

www.ritterwerk.de.

INTENDED USE

The food slicer is used for the

slicing of household foods.

If the appliance is used for a

purpose other than this, or if it is

operated incorrectly, severe inju-

ries may occur or the appliance

may be damaged. All warranty

and liability claims will be ren-

dered null and void in this case.

BEFORE USING THE

APPLIANCE FOR THE

FIRST TIME

Preparation

Remove the appliance carefully

from the packaging. Remove all

packaging parts and keep these

together with the packaging in a

safe place. Clean the appli-

ance before allowing it to come

into contact with any food (see

CLEANING).

Setting-up the appliance

• Set the appliance down on a

at, non-skid surface close to a

mains socket.

Using a small amount of

force, push the slice carriage (3)

vertically into the guide groove on

the appliance until it audibly locks

into place.

Slide the left-over holder (9)

onto the slice carriage's handle.

Unwind the power cord (7) to

the length required from the cable

compartment (8) under the appli-

ance and insert the power plug

into the socket.

SLICING

Use the slice thickness adjust-

ment knob (4) to set the required

thickness.

Info:

The slice thickness adjustment

scale is not a millimetre scale.

For safety reasons, the "0" posi-

tion is designed to cover the

blade.

Place the food to be sliced

onto the slice carriage (3). Use

the left-over holder (9) to press it

up against the stop plate (2).

• Switch the appliance on

using the power switch (1). Two

operating modes are available:

Temporary (Position II): The

rotary blade (11) runs as long as

the power switch is pressed and

held down in this position.

Continuous operation

(Position I): The rotary blade

runs without the power switch

being pressed and held down

until you move the power switch

to the "0" position.

Info:

Never use the appliance for more

than a maximum of 5 minutes in

continuous operation.

• With the appliance running,

gently feed the food to be sliced

into the path of the rotary blade.

• Once slicing has been com-

pleted, wait until the rotary blade

has come to a complete stop.

• After each use, turn the slice

thickness adjustment knob to the

"0" position, in order to cover up

the sharp rotating blade and to

avoid any injuries.

Protect your hands by always

using the slice carriage and,

where applicable, the left-over

holder. Exception: Excessively

large foods to be sliced.

E 16 / arcus

/ fortis

Pull the slice tray (5) to the left

and out of the appliance.

CLEANING

Caution:

Switch the appliance o before

cleaning it; pull the power plug

out o the socket and turn the

slice thickness adjustment

knob (4) to the "0" position.

Clean the food slicer regularly

to prevent the accumulation of

food residue. The rotary blade

must also be cleaned regularly

as described below to prevent its

surface from rusting.

Info:

Over time, an accumulation of

food residue may cause damage

to the surface of the rotary blade,

causing it to rust.

Preparation

• Remove the slice

tray (5, E 16 / arcus

/ fortis

) and

the left-over holder (9).

Pull the slice carriage (3)

forward and then lift it up and out

of the guide groove.

Removing the rotary blade:

Place a suitable coin on the

blade catch (10) and turn it in a

clockwise direction.

• Take hold of the rotary

blade (11) at its rotational centre

and remove it.

Cleaning after each use

• Wipe down the housing and

all removed parts, including the

rotary blade, with a damp cloth.

Occasional cleaning

• Give all removed parts, includ-

ing the rotary blade, a thorough

wash in warm soapy water (not in

the dishwasher!).

• Clean the housing behind the

blade using a dry cloth/brush.

Info:

Do not use any abrasive cleans-

ers, sponges with rough surfaces

or hard brushes to clean the

appliance.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ritter fondo 1 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info