Bedienungsanleitung Ritter sono1 (Seite 16 von 86) (Alle Sprachen)

713213

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

Unfold the illustrations at the front

and back of this manual.

Please read these instructions

thoroughly before you start to use

the appliance. Keep these operat-

ing instructions in a safe place

and ensure that they are included

with the appliance if passing it on

to a third party.

Alternatively, the current operat-

ing instructions are available at

www.ritterwerk.de.

INTENDED USE

The food slicer is used for the slic-

ing of household foods.

The food slicer is suitable

for contact with

foodstus.

If the appliance is used for a

purpose other than this, or if it is

operated incorrectly, severe inju-

ries may occur or the appliance

may be damaged. All warranty

and liability claims will be ren-

dered null and void in this case.

BEFORE USING THE

APPLIANCE FOR THE

FIRST TIME

Preparation

Remove the appliance carefully

from the packaging. Remove all

packaging parts and keep these

together with the packaging in a

safe place. Clean the appli-

ance before allowing it to come

into contact with any food (see

CLEANING).

Setting-up the appliance

• Set the appliance down on a

at, nonskid surface close to a

mains socket.

Using a small amount of

force, push the slice carriage (9)

vertically into the guide groove on

the appliance until it audibly locks

into place.

Slide the left-over holder (10)

onto the slice carriage's handle.

compact

/ nova

/ no

Unwind the power cord (5) to the

length required from the cable

compartment (8) under the appli-

ance.

• Plug the cable into the socket.

SLICING

Use the slice thickness adjust-

ment knob (2) to set the required

thickness.

Note:

The slice thickness adjustment

scale is not a millimetre scale.

For safety reasons, the "0"

position is designed to cover the

blade.

Place the food to be sliced

onto the slice carriage (9). Use

the left-over holder (10) to press

it up against the stop plate (11).

Protect your hands, by always

using the slice carriage and,

where applicable, the left-over

holder. Exception: Excessively

large foods to be sliced.

Turn the appliance on using

the power switch (1). Two operat-

ing modes are available:

Temporary operation:

Press the power switch and slide

it towards the arrow until you

feel some resistance. The rotary

blade (6) runs as long as the

power switch is pressed and held

down in this position.

Continuous operation:

Press the power switch and slide

it towards the arrow beyond the

resistance point until it latches

into place. The rotary blade runs

without the power switch having

to be pressed and held down,

until you push the power switch

back into the "0" position.

Note:

Never use the appliance for more

than a maximum of 5 minutes in

continuous operation.

• With the appliance running,

gently feed the food to be sliced

into the path of the rotary blade.

• Once slicing has been com-

pleted, wait until the rotary blade

has come to a complete stop.

• After each use, turn the slice

thickness adjustment knob to the

"0" position, in order to cover up

the sharp rotating blade and to

avoid any injuries.

compact

/ no

Pull the slice tray (3) to the left

and out of the appliance.

CLEANING

Caution:

Switch the appliance o before

cleaning it; pull the power plug

out o the socket and turn the

slice thickness adjustment

knob (2) to the "0" position.

Clean the food slicer regularly

to prevent the accumulation of

food residue. The rotary blade

must also be cleaned regularly

as described below to prevent its

surface from rusting.

Note:

Over time, an accumulation of

food residue may cause damage

to the surface of the rotary blade,

causing it to rust.

Preparation

compact

/ no

• Pull the slice tray (3) to the left

and out of the appliance.

• Removing the left-over

holder (10).

Pull the slice carriage (9)

forward and then lift it up and out

of the guide groove.

Removing the rotary blade:

Open the blade catch (7), by

turning it in a clockwise direction.

• Take hold of the rotary

blade (6) at its rotational centre

and remove it.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ritter sono1 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info