Bedienungsanleitung Rival RGST902 (Seite 5 von 37) (Englisch)

559827

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

1. Do not attempt to operate this microwave with the door open. Door open operation can result in harmful

exposure to microwave energy. It is important not to defeat or tamper with the safety interlocks.

2. Do not place any objects between the microwave front face and the door, or allow soil or cleaner residue to

accumulate on sealing surfaces.

3. Do not operate the microwave if damaged. It is particularly important that the microwave door be properly closed

and there is no damage to the door (bent), hinges and latches (broken or loosened), or door seals and sealing

surfaces.

4. The microwave should not be adjusted or repaired by anyone except properly qualified service personnel.

1. Make sure all packing materials are removed from inside the microwave door.

2. Check the microwave for damage, such as misaligned or bent door, damaged door seals and sealing surface,

broken or loose door hinges and latches, and dents inside the cavity or on the door. If there are any damages, do

not operate the microwave and contact Customer Service at 1-866-321-9509.

3. This microwave must be placed on a flat, stable surface to hold its weight and the heaviest food likely to be cooked

inside.

4. Do not place the oven where heat, moisture, or high humidity is generated. Do not place microwave near

combustible materials.

5. For correct operation, the oven must have sufficient air flow. Allow 8” of space above the microwave, 4” at the back,

and 2” on each side of the unit.

6. Do not cover or block any openings on the microwave. Do not remove microwave feet. Do not operate the oven

without the glass tray, roller support, and shaft in their proper positions. Make sure the power supply cord is

undamaged and does not run under the microwave or over any hot or sharp surface.

7. The socket must be readily accessible so the microwave can be easily unplugged in an emergency.

This microwave must be grounded. In the event of an electrical short circuit, grounding reduces risk of electric shock by

providing an escape wire for the electric current. Consult a qualified electrician or serviceman if the grounding

instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded. For

questions regarding the grounding instructions, please contact our Customer Support Center at 1-866-321-9509.

Consult a qualified electrician or serviceman if the grounding instructions are not completely understood, or if doubt

exists as to whether the appliance is properly grounded, and either:

1) If it is necessary to use an extension cord, use only a 3-wire extension cord that has a 3-blade grounding plug and a

3-slot receptacle that will accept the plug on the appliance. The marked rating of the extension cord shall be equal to or

greater than the electrical rating of the appliance, or 2) Do not use an extension cord. If the power supply cord is too

short, have a qualified electrician or serviceman install an outlet near the appliance.

WARNING: Improper use of the grounding plug can result in risk of electric shock.

INSTALLATION GUIDE

GROUNDING INSTRUCTIONS

PRECAUTIONS TO AVOID POSSIBLE EXPOSURE

TO EXCESSIVE MICROWAVE ENERGY

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rival RGST902 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info