Bedienungsanleitung Roadstar CDR-4230MP (Seite 6 von 26) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

471597

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

English English

7. To cancel programmed playback, press the STOP button (19) twice.

Note: During program playback, if you wish to repeat the entire programmed playback,

press the PROG/P-MODE button (11) repeatedly until the “REP” indicator appears

on the display.

FOLDER FUNCTION IN MP3 MODE

Note: You can use the FOLD+/ + 10 or FOLD-/ - 10 Button (22/23) to jump 10

tracks up or down.

ANTI-SHOCK FUNCTION

• If in use, the player is likely to receive shocks or vibrations (i.e. whilst walking or in a

moving vehicle), The ANTI-SHOCK function is active to provide uninterrupted playback

when power on.

• Should the player receive shocks for more than 5 seconds continuously in CD playback

or 50 seconds in MP3 playback, the sound can mute for a very short while and will

resume once the player has stabilised from the shock.

Notes:

• The Anti-shock function will not correct the errors arising from the use of defective

scratched or dirty discs.

• IMPORTANT! During CD/MP3 playback, the ANTI-SHOCK function is always ON and

this function can not be disactivated.

IMPORTANT

Since movement of the CD mechanism and the sensitive circuitry may cause interference

to a radio tuner nearby switch this unit off while operating other radio devices.

This product utilizes a laser

Danger - Invisible laser radiation when opened and interlock failed or defeated. Avoid

direct exposure to the beam.

Caution - Use of controls, adjustments, or procedures not listed in this manual may result

in hazardous radiation exposure.

Concerning Compact Discs

Only compact discs identified with this mark can be used with

this player.

SPECIFICATIONS

Power Supply

AC: 230V ~ 50Hz

Batteries: 6 x UM-2

Radio Frequency Coverage

FM: 87.5 - 108 MHz

MW: 540 - 1600 kHz

General

Headphones: 3.5mm stereo jack plug, 8-32 Ohm

CD Player

Pick Up: 3-Beam. Semiconductor Laser

Encoding: 16-Bit Linear

Note: Specifications and the design are subject to possible modifications without notice due to

improvement.

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

This marking shown on the product or its literature, indicates that it should not

be disposed with other household wastes at the end of its working life. To prevent

possible harm to the environment or human health from uncontrolled waste

disposal, please separate this from other types of wastes and recycle it

responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this

product, or their local government office, for details of where and how they

can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions

of the purchase contract. This product should not be mixed with other commercial

wastes for disposal.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roadstar CDR-4230MP Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info