Bedienungsanleitung Roadstar CDR-7000U (Seite 6 von 37) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

592178

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

EnglishEnglish

9 10

5. Press the FOLD./10/M+ or FOLD./10/M- on unit or MEM/FOLD./10 UP/DOWN button on

remote to listen to the stored station directly.

CD/MP3 OPERATION

Discs for Playback

This system can playback all digital audio CD/MP3, finalized digital audio CD-Recordable

(CD-R) discs, finalized digital audio CD-Rewritable (CD-RW) discs and CD-DA format

digital audio CD/CD-R/CD-RW discs.

LOADING A DISC

1. Press the FUNCTION button on unit or remote control to select “CD” mode.

2. Press the OPEN/CLOSE button to open the CD door, “OPEN” will be shown on the

display.

3. Place an audio CD/MP3 DISC into the tray with the front side facing up.

4. Close the CD door.

The display will show a flashing “ — READING — “, then the total number of tracks would

be shown and the playback will start from track.

5. To remove the CD, press OPEN/CLOSE to open CD door, the display will show “OPEN “.

Hold the CD by its edges, and take it out carefully.

Note:

- Make sure the disc is stopped before opening the CD DOOR.

- To ensure good system performance; wait until the unit completely reads the disc before

proceeding.

- If no disc loaded into the tray, or the disc is unreadable, the display will show “NO DISC”.

PLAYING A DISC

1. The playback starts from track 1 automatically when reading the disc.

To pause playback, press button on unit or on remote. The current playing time will

flash on the display.

To resume playback, press button on unit or on remote again.

2. To stop playback, press MO/ST./ button on unit or on remote, the total number of

tracks.

SELECTING A DESIRED TRACK/PASSAGE

To select a desired track

Press the TUN+/ or TUN-/ button on unit or remote respectively in stop mode or

during playing until the desired track appears on the display. Press the button on unit or

on remote to start play.

To search for a particular passage during playback (track scanning at high speed)

Press and hold the TUN+/ or TUN-/ button on unit or on remote to scan the current

playing track at high speed until desired point (passage) appears, then release the button for

normal playback mode. Playback will start again from this point.

To select a song which track number exceeds 10

To select a song/track which number exceeds 10, Press the FOLD./10/M- or FOLD./10/M+

button on unit or -MEM/FOLD./10+ button on the remote control each time to skip backward

or forward 10 tracks, then press the TUN+/ or TUN-/ button on unit or on

remote to select desired track. For example: to select the 17th track from the 1st track,

press FOLD./10/M+ button on unit or press MEM/FOLD./10 UP(12) key on remote, and

then press the SKIP UP button on unit or on remote six times immediately.

To select a desired folder (for MP3 disc that contains more than one folder)

To select a desired folder during playback, press and hold the FOLD./10/M+ or FOLD./10/M-

button on unit or -MEM/FOLD./10+ button on the remote control to next /previous folder.

PROGRAMING TRACKS

Programming tracks of disc are possible when playback is stopped. Up to CD 20 tracks /

MP3 99 tracks can be stored in the memory in any order.

In stop mode, press the PROG./P-MODE button on unit or press MEM/PROG./P-

MODE key on remote to enter program setting, the display will flash PROG and

P01 001.

Press the TUN+/ button on unit or on remote to select the first desired track to be

programmed. (example: track 2)

Press the PROG./P-MODE button on unit or press MEM/PROG./P-MODE key on

remote to enter. The display would flash PROG and P02 002.

Repeat steps 2 & 3 to store other desired tracks until all tracks programmed.

Press the button on unit or on remote to start playback from the first programmed

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roadstar CDR-7000U Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info