7
MMI of CLR-2860UMP
___________________________________________________________________________________________________________
3 How to work of device
3.1 Using Cooking Timer:
3.1.1 Press <Timer> once to enter the timer mode.
3.1.2 Press <UP> or <DOWN> to adjust the value (from 1 minute to 23hours and 59minute) or press
<preset +> or <preset -> to recall the pres
et value, press <Timer> to start the cooking timer. 3.1.3 When the timer is running press <Timer> to pause the timer. To restart the timer press <Timer>
again.
3.1.4 When the timer remain 30 seconds, the remind tone “be” will sound, (it also sound at 30s，25s, 20s,
16s, 12s, 9s, 6s, 4s, 2s & 1s) the time reach to 00.00, the voice “be…be…be…be…be” will be heard
for one hour. Press <Timer> to terminate the timer and leave.
3.1.5 Press and hold <Timer> for 2 seconds to terminate the timer and leave, when the timer is running.
3.1.6 As the alarm becomes active, the cooking timer, if exists, is terminated immediately.
3.2 When SDA (Special Date Alert) Active:
3.2.1 When the date/month/(year) matches with the SDA which has been enable, alert becomes active.
3.2.2 As the SDA active, Sound of beep toggles at the Speaker for 10 minutes, Muted Radio even radio
ON & The “SDA” goes flash on LCD display
3.2.3 Press any key to start its corresponding function and the SDA will be terminate
3.2.4 When SDA is active, even key-lock has been switched on, press any key can terminate alarm.
3.3 When alarm is active:
3.3.1 When the real time clock matches with the alarm which has been enabled, alarm becomes active
3.3.2 As the alarm becomes active, the AOT if exists, is terminated immediately
3.3.3 If Beep sound alarm is selected,
a. Sound of beep toggles at the Speaker
b. Muted Radio even radio ON
c. The duration of alarm is 10 minutes
3.3.4 If Radio alarm is selected,
d. Radio On
e. the duration of the alarm is 60 minutes
3.3.5 Press any key to terminate the currently active alarm, even key-lock has been switched on .
3.4 Using the Radio:
3.4.1 start radio
• Press <Power> once to turn on the unit
• Press < Func/User > key to select Radio
• Press <Power> again to turn off the unit
3.4.2 Select User
• Press and hold <USER> for 3 seconds to change the current USER, the selected “USER A” or
“USER B” will show on display for 5 seconds.
• Each user arranged 32 memories (User A and memory1 preset in factory)
3.4.3 Recall radio preset memory
• There are 4 preset key for store radio station and cooking timer.
• When the radio is ON, press <MEM. /User> once. ‘MEM’ goes solid; the frequency of the memory-1
goes solid in the LCD.
• Press <Preset +>, <Preset -> to select the desired preset memory station.
• When new preset memory key is pressed, MUTE is active. When keying the preset memory has
been released for 1 second, the selection of preset memory is considered as valid and the
radio will be tuned to that frequency immediately with MUTE idle.
• At any time, press other key to start its corresponding function. ( When Radio is OFF, same
operation for cooking timer memories recall )
3.4.4 Store into memory
• To store the tuning frequency of radio station being received into any of the preset memory, press
<MEM > once. The ‘MEM’ goes flashing
