Bedienungsanleitung Roadstar HRA-1300DAB (Seite 6 von 19) (Deutsch, Englisch, Französisch, Italienisch)

592133

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

English English

4. When the display shows your desired alarm wake-up mode, press the SELECT button,

the alarm function is now activated and the associated alarm icon will be displayed.

5. To activate the other Alarm (1 or 2), repeat the above procedures.

6. When the alarm time arrives, the selected wake-up mode will be on and the alarm icon in

the display will flash to indicate the alarm is triggered. To stop the alarm sooner, press the

button.

Note 1: If you have activated the alarm function and the wake-up mode is DAB or FM, make

sure that the alarm volume level is set at a sufficient level for you to hear

Note 2: The alarm comes first will have the priority and it would continue for a duration of one

hour, the snooze will just switch off this alarm temporary during this duration, so if the second

alarm comes in this period, it will not function. But if the first alarm is switched off before the

second alarm arrives, then the second alarm will be activated.

Automatic Alarm Repeat

The alarm will automatically repeat each day at the selected time as long as the alarm icon is

displayed. To cancel this function, go to the Alarm Menu and select “Alarm # off” in the associated

“Alarm Source” menu.

Snooze function

When the alarm has triggered, press the SNOOZE button will temporary switch off the alarm

for 5 minutes, the display will show

“Zz” to indicate snooze on. This is repeatable in the one hour alarm duration.

SLEEP FUNCTION (AC operation only)

This function allows you to program the radio to switch off itself after a set period of time.

1. To activate the sleep function, repeatedly press the SLEEP button, the display will show

“Sleep Timer” and the time will change in the below sequence on every press:

2. When your desired sleep time appears in the display, release the button and the sleep

function will be activated in two

seconds. The display will show “s#” where “s1” is to represent “10 minutes” sleep time and so

on.

3. When the sleep time counts to zero, the unit will go off. To put the sleep function off during

sleep timer on, repeatedly press the SLEEP button until the display shows “Sleep Timer Off”.

4. To check the sleep timer status, press the SLEEP button once.

Note: The sleep function can be activated only in AC operation, there is no sleep function in

battery operation.

DISPLAY BACKLIGHT

There are backlight levels for you to set in AC operation mode, it is defaulted to be “Low” in

standby and “High” during operation. This is resumed only when the factory reset has taken

place. Despite of the backlight setting in either standby or operation, press on any of the keys

will turn on the backlight to “High” for 5 seconds.

1. To set the backlight during operation, first press the MENU button once, when you see

“Backlight” appears in the display, press the SELECT button to enter into the “Backlight” menu.

(if you are in DAB mode, repeatedly turn the SELECT control followed by pressing on the

SELECT button to enter into the “Backlight” menu).

2. Repeatedly turn the SELECT control to select the backlight level - High / Medium / Low /

Off, when your desired level appears in the display, release the control.

3. To set the backlight in standby, first press the MENU button once, and when the display

shows “Standby Backlight”, press the SELECT button followed by turning the SELECT control

to select between “Low” & “Off”.

Note: There is no backlight setting in battery operation, during this mode, when the radio is

switched to on, the display backlight will be dimmed in a few seconds and it will be turned on to

full brightness for 10 seconds on any operation of the keys or controls.

HEADPHONES

Headphones should have a 3.5mm diameter stereo plug and an impedance of 8-32 ohms. When

headphones are connected (8), the speaker is automatically disconnected.

SPECIFICATIONS

Power Supply

AC: 230V ~ 50Hz

DC: 6V, 4 x UM3 Battery

Radio Frequency Coverage

FM: 87,5 - 108 MHz

DAB: 174 - 240 MHz

Speaker 4 Ohms, 3-5 W

Ouput power: 0.8 W RMS, 10% THD

General

Headphone: 3.5mm jack plug, 8-32W

Impedance 32 Ohms

Specifications and the design are subject to possible modifications without notice due to improvement.

7 8

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roadstar HRA-1300DAB Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info