Bedienungsanleitung Roadstar PCD-495MP (Seite 7 von 38) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

592182

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

EnglishEnglish

IN MP3

1. Press the PLAY/PAUSE button (6) and after 8 seconds the STOP button (9).

2. Press the PROG/MODE button (2), the following will appear on the display :

00 000 P-01

ALBUMNUMBER TRACK NUMBER PROGRAMNUMBER

and the Album no. will flash.

3. Press the SKIP Forward and Backward (10,7) buttons to select the desired Album to be

programmed.

4. Press the PROG/MODE button (2) once to enter the Album into memory. The Album

number will stop flashing and the track number will start flashing.

5. Press the SKIP Forward and Backward (10,7) buttons to select the desired track to be

programmed.

6. Press the PROG/MODE button (2) to select the desired track to be programmed.

7. Repeat the steps 3 to 6 to program up to 24 tracks.

8. Press PLAY/PAUSE button (6) once to start programmed playback.

9. To cancel programmed playback, press the STOP button (9) twice.

SWITCH OFF THE VOLUME LIMITATION

To protect your hearing, after switched ON the unit is only available a limited Volume

level. You can switch disable this limitation by keep pressed the the + button. The dis-

play flash “HIGH”.

To disable this function, press the “-” button.

NOTE: The Voléume restriction is reactivate every time that the unit is switched OFF or

the disc is changed.

SPECIALFUNCTIONS

Bass Boost

Press the BBS button (12) to switch ON the Bass Boost function.

Auto Power Off

When the unit is stopped (standby mode) for approximately 60 seconds, the Auto Power Off

function will activated and turn the unit off automatically.

Anti-shockFunction

• Ifin use, the player is likely to receiveshocksor vibrations (i.e. whilst walking or in a moving

vehicle).As soonasthe PLAY/PAUSEbutton ispressed,the ASPfunction isautomatically

activated to allow uninterrupted playback. “ASP” will compare in the display.

• Should the player receive shocks for more than 45 seconds continuously in CD playback

or120 seconds in MP3 playback,the sound can mutefor a very shortwhileandwill resume

once the player has stabilised from the shock.

• To disable ANTI-SHOCK Function, press ASP button (3) once (CD mode only).

Notes:

• When using the Anti-shock function, the disc will rotate faster than normal playback and

memory is active. Only use the ANTI-SHOCK function when necessary to preserve the

battery life.

• The Anti-shock function will not correct the errors arising from the use of defective

scratched or dirty discs.

• IMPORTANT! During MP3 playback, the ANTI-SHOCK function is always ON and this

function can not be disactivated .

ResumeFunction

MAINTENANCE

Cleaningtheunit

Wipe the outside surface of the unit with a soft cloth moistened with water and mild soap.

HandlingCDs

Your CD player has been especially designed for the reproduction of compact discs bearing

the CD mark. No other discs should be loaded into the player.

Always place the disc in tray with the label facing up.

Although compact discs are impervious to wear during play, damage to the surface of a disc

through improper handling will result in playback irregularities.

To preserve your compact discs, please handle them with care.

Although minute dust particles and fingerprints should have no effect on playback, you should

keep the serface of the recorded side of your discs clean by wiping the disc with a clean, dry,

lint-free soft cloth with straight movements from the centre outwards.

Never use record cleaners, record sprays, antistatic sprays, liquids nor chemical based liquids

to clean the surface of a disc. They may in fact irreparably damage the disc's plastic surface.

Always return the disc to its protective plastic case when not using it. Avoid exposing discs

to direct sunlight, excessive temperatures or high humidity for extended periods of time. Do

9 10

PCD-495MP_EN.pmd 05/11/2013, 18.365

End playback by pressing  twice.

When playback is resumed, the last song re-start from position at which it has ended.

To start playback at the first track, press FF/REWonce and start playback.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roadstar PCD-495MP Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info