Bedienungsanleitung Roadstar RU-285BT (Seite 6 von 38) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

592047

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

EnglishEnglish

SELECT (2) button shortly until the desired functions is shown on the display. Figure 1

shows how control functions are selected using the SELECT button.

1. VOLUME (rotate knob)

2. SELECT (push down)

3. BASS

4. TREBLE

5. BALANCE

6. FADER

7. LOUDNESS ON / OFF

8. DSP (ROCK - POP - CLASS - SDP OFF)

9. TA Volume

10. REGIONAL ON / OFF

11. DX / LOC

12. STEREO / MONO

3. VOLUME CONTROL

Rotate the VOLUME knob to increase or decrease the volume. This knob can be used to

adjust the BASS, TREBLE, BALANCE and FADER.

This knob also selects the possible options in RDS function.

When press the SEL button for more than 2 seconds, it is activated as selecting mode of

these function. Turn the volume knob to select:

AF ON / OFF

To switch the AF (Alternative Frequency) ON or OFF.

TA ON / OFF

To switch the TA (Trafic Alarm) ON or OFF.

TA SEEK/TA ALARM (2)

TA SEEK Mode or TA ALARM mode.

- TA SEEK mode:

When newly turned station does not receive TP information for 5 sec., the radio retunes

to next station which has not the same station (PI) as the last station, but has the TP

information.

In TA seek mode, the current station can be changed to the completely different station

because the unit searches TP station when the field strength of the current station is

very weak, or the current station has no TP signal.

- TA ALARM mode:

Any automatic retune mode is not activated, just can be heard Beep sound.

PI SOUND / PI MUTE

– PI SOUND

When a car cruises some special area which has different PT code with same AF.

PI sound (DIP) is heard once in a while, the DIP’s sound will be heard for less than 1

second.

– PI MUTE

Under the above same situation, a mute sound will be heard for less than 1 sec.

RETUNE L / RETUNE S

The initial time of automatic TA search or PI search mode is selected.

When PI information is not caught for retune time, the radio start to retune to next same

PI station. When same PI station does not catch 1 cyclic search, the radio goes to last

station and waits for 4-5 minute until PI code is received.

BEEP MODE (2)

When press the SEL button for more than 2 seconds, it is activated as selecting mode

of these function. Turn the volume knob to select:

BEEP ON: BEEP sound can be heard from speaker whenany buttons are pressed.

BEEP OFF: to disable the BEEP option.

4. PRESET STATIONS (1,2,3,4,5,6)

(A) RADIO MODE:

When pressed short, these keys select a preset station directly. When pressed longer

than 1 sec., current station is stored in preset memory bank. When PTY mode is se-

lected, the PTY switch is shared as follows:

PTY music group ---- PTY speech group ---- OFF

MUSIC SPEECH

1. POP M, ROCK M 1. NEWS, AFFAIRS, INFO

2. M.O.R. M, LIGHT M 2. SPORT, EDUCATE, DRAMA

3. CLASSICS, OTHER M 3. CULTURE, SCIENCE, VARIED

4. JAZZ, COUNTRY 4. WEATHER, FINANCE, CHILDREN

5. NATION M, OLDIES 5. SOCIAL, RELIGION, PHONE IN

6. FOLK 6. TRAVEL, HOBBIES, DOCUMENT

USING THE RDS FUNCTION

What is RDS?

The RDS (Radio Data System) is a digital information system developed by the EBU (Euro-

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roadstar RU-285BT Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info