Bedienungsanleitung Roadstar TS-810 SS (Seite 2 von 13) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

592260

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

EnglishEnglish

1 2

TS-810/SS

Cool touch wall Toaster

Before Use

Carefully remove your toaster from its packaging.

You may wish to store the packaging for future use.Otherwise dispose the packaging according

to the local rules on recycling.

Please read this instruction manual carefully and familiarize yourself with your new Toaster

before using it for the first time. Please retain this manual for future reference.

BOX CONTENTS

• Toaster TS-810/SS

• Instruction manual

• Warranty card

ELECTRICAL SAFETY

Caution: For your own safety read the following instructions carefully before attempting to connect

this unit to the mains. Before switching on make sure that the voltage of your electricity supply is

the same as that indicated on the rating plate.

This unit is designed to operate on AC 230V 50Hz current only. Connecting it to other power

sources may damage the unit. Do not allow this unit to be exposed to rain or moisture.

SAFETY INSTRUCTIONS

Please read this instruction book carefully before operating this toaster.

Retain for future reference.

Positioning your Toaster

Caution: Bread can burn. Do not place or operate the toaster below curtains or other combustible

materials. Do not leave the toaster unattended when in use.

• Do not operate the toaster underneath cupboard units. Ensure the toaster is placed

away from walls.

• Always allow the toaster to cool completely after use before moving it.

• Never move the toaster by placing fingers in or near the bread slot.

Safety

• Ensure the mains lead is kept clear from hot objects and surfaces.

• Ensure close supervision when operating toaster while children are present.

• Always allow the toaster to cool completely after use before storing it.

• Ensure bread fits easily into the slot before using toaster. Torn or thick bread can

cause the toaster to jam.

• NEVER attempt to remove bread if it becomes jammed in the slot, without first

unplugging the toaster from the mains supply. Allow to cool completely before

removal.

• Take care not to damage the internal mechanism when removing bread.

• Internal parts can be easily damaged. Do not touch the internal parts of the toaster with

any implement as this is very dangerous and could cause an electrical hazard.

Special Notes:

When the toaster is plugged in and operating for the first time, there may be a slight burning

odour, as the heating elements warm up. This represents no danger to the user and does not

indicate a defect in the appliance. When using for the first time, allow the toaster to heat up until

the odour clears.

It is advisable to first operate the toaster without placing bread in the slot.

1. Connect the toaster to the mains supply .

2. Set the browning control (B) to the lowest setting (1).

3. Press the loading handle (A) down and allow the heating elements to warm.

4. Allow elements to heat up until burning odour clears.

5. Press CANCEL button (C) to release loading handle.

FEATURES

A. Loading Handle

B. Variable Browning Control

C. CANCEL Button

D. Removable crumb tray

TOASTERS MUST NEVER BE LEFT UNATTENDED WHEN IN USE.

ACCESSIBLE SURFACES CAN REACH HIGH TEMPERATURES DURING OPERATION.

TOASTER OPERATION

• Ensure the toaster is connected to mains supply.

• Place one or two slices of bread or toasts into the slot, adjust the browning control (B)

to achieve the amount of toasting desired, then depress the loading handle (A) until it

latches.

• The toaster will heat up automatically and start toasting.

Note: The loading handle (A) will not latch if the mains supply is not connected.

• To stop toasting press the CANCEL button (C) at any time.

• Lift the loading handle (A) to check the bread during toasting.

• When toasting is finished the loading handle (A) will rise automatically. The toast can

then be safely removed.

• If the toast is not dark enough, you may wish to toast the bread again.

• Adjust the browning control (B) to a lower setting and replace the toast. Ensure the toast

does not burn while re-toasting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roadstar TS-810 SS Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info