Bedienungsanleitung Roadstar ttr 8632 uce (Seite 6 von 32) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch)

160808

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

EnglishEnglish

REPEAT/INTRO/RANDOMMODE(BYREMOTECONTROL)

Press the Repeat/Intro/Random button (4) on the remote control before or during playback,

a single track, single folder (MP3 only) or all the tracks can be played in different mode as

follows:

FOR MP3/WMA

(1) REPEAT 1 (2) REPEAT ALL TRACK (3) REPEAT ONE FOLDER

(6) OFF MODE (5) RANDOM (4) INTRO PLAY

INDICATOR

PLAY MODE ON LCD DISPLAY

REPEAT SINGLE TRACK

REPEAT ALL TRACKS ALL

REPEAT SINGLE FOLDER

INTRO PLAY MODE INTRO

RANDOM MODE RANDOM

OFF MODE ------------

 Repeat play

You can listen the desired tracks or folder repeatedly by this function.

 Intro play

You can listen the beginning (10 seconds) of each track in a cd by this function & saving

your time to search the desire song

 Random play

You can listen all the tracks or folder in a random order by this function

USB/SD PROGRAMMING(BYREMOTECONTROL)

Up to 32 tracks can be programmed for MP3 file and play in any order. before use, be sure

the system is at stop mode before programming:

1. Set in USB mode with the Source button (10).

2. Press the “PROGRAM” button (5), “ PROG “ will appear on LCD display. Moreover, it

will indicate program no. and digits for track no. to be programmed.

3. Select a desired track by pressing SKIP or buttons (7).

4. Press the “ program “ button to store the trace into memory.

5. Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.

6. When all the desired tracks have been programmed, press “ PLAY/PAUSE “ button

(6) to play the disc in assigned order.

7. To cancel the programmed file, press “STOP” button on remote handset until “ PROG

“ is disappear on LCD display (2).

PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA OR MEMORY

CARD CONNECTING

The system is able to decode and playback all MP3 /WMA file which stored in the memory

media with USB connecting port or SD/MMC memory card.

1. Set Function selector (7) at USB mode and then press SOURCE button (10) to select

“ USB or CARD” mode.

2. Plug-in the USB plug with the face up & make sure it going into completely or insert

the memory card in the direction of the arrow as shown in the label on the underside

of the MEMORY CARD slot cover. Insert straight without bending.

 Connecting the USB upside down or backwards could damage the audio system or

the storage media (usb thumb drive / sd/mmc card). Check to be sure the direction is

correct before connection.

3. The system will start reading the storage media automatically after connecting, and

LCD display (2) will show the total number of MP3/WMA files and total number of

folder being detected.

7 856

REMARK

- The system can detect and read the file under mp3

and wma format only though the usb port.

- If connect the system to MP3 player via the usb

socket, due to variances inMP3 encoding format,

some mp3 player may not be able to play via the

usb socket. this is not a maul-function of the

system.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roadstar ttr 8632 uce Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info