A LOOK AT THE RADIO'S FUNCTIONS STEP BY STEP
MODEL submenu: includes three functions that manage model memory: MODEL SELECT, MODEL COPY and MODEL NAME.
Since these functions are all related, and are all basic features used with most models, they are together in the MODEL
submenu of the BASIC menu.
MODEL SELECT: This function selects which of the 8 model memories in the transmitter
(or 6 in the optional CAMPac) to set up or fly. For clarity the model's name and an image
of its type are indicated after its number. (Each model memory may be of a different
model type from the other memories.)
Note: If you are using the optional CAMPac, your choices in MODEL SELECT and MODEL
COPY will include 9-14, which are the model memories in the CAMPac. You do not have to
COPY from the CAMPac to the transmitter prior to working with that model memory.
GOAL: STEPS: INPUTS:
NOTE: When you choose a new model in the
MODEL SELECT function, if the new model is set to
the other modulation, you must cycle the transmitter
power to change modulations. If you do not cycle
the power, the modulation type will flash on the
home screen to remind you. You are still
transmitting on the other modulation until you affect
this change.
25
Select Model #3.
NOTE: This is one of several functions
for which the radio requires
confirmation to make a change.
Open BASIC menu, then open MODEL
submenu.
Choose Model #3.
Confirm your change.
Close.
for 1 second.
(If ADVANCE, again.)
if required to MODEL.
to 3.
for 1 second.
sure? displays.
Confirm proper modulation of new
model memory.
Where next?
If PPM or PCM are flashing in the upper right hand corner, then the new model is set
for the other receiver type. Turn the transmitter off/on to change the modulation.
NAME the model: see p. 25.
Change MODEL TYPE (aircraft, heli, glider): see p. 28.
Change modulation [FM (PPM) or PCM]: see p. 28.
Utilize servo REVERSE: see p. 31.
Adjust END POINTs: see p. 32.
Set up IDLE-DOWN and THR-CUT for throttle management: see p. 33.
FLASHING
