The following additional accessories are available from your dealer. Refer to a Futaba catalog for more information:
•
CAMPac Memory module - the optional DP-16K CAMPac increases your model storage capability (to 14 models from
8) and allows you to transfer programs to another 9C transmitter. Note that data cannot be transferred to/from any other
model of transmitter (i.e. 8U, 9Z, etc).
Insertion of a CAMPac containing data of a different transmitter type (ex: 9Z) will result in a complete
CAMPac data reset and loss of all data.
•
NT8S Transmitter battery pack - the (600mAh) transmitter Ni-Cd battery pack may be easily exchanged with a fresh
one to provide enough capacity for extended flying sessions.
•
Trainer cord - the optional training cord may be used to help a beginning pilot learn to fly easily by placing the instructor on
a separate transmitter. Note that the 9C transmitter may be connected to another 9C system, as well as to many other models
of Futaba transmitters. The 9C transmitter uses the newer rectangular type cord plug. Both new-to-new and new-to-round plug
style trainer cords are available.
•
FTA8 Neckstrap - a neckstrap may be connected to your T9C system to make it easier to handle and improve your flying
precision, since your hands won’t need to support the transmitter’s weight.
•
Y-harnesses, servo extensions, etc - Genuine Futaba extensions and Y-harnesses, including a heavy-duty version with heavier
wire, are available to aid in your larger model and other installations.
•
5-cell (6.0V) receiver battery packs - All Futaba airborne equipment (except that which is specifically labeled otherwise) is
designed to work with 4.8V (Ni-Cd 4 cells) or 6.0V (Ni-Cd 5 cells or alkaline 4 cells). Using a 6.0V pack increases the current
flow to the servos, which accelerates their rate of response and their torque. However, because of this faster current draw, a 5-
cell battery pack of the same mAh rating will last approximately ¾ the time of a 4-cell pack.
•
R309DPS - Synthesized receiver which can be changed to any 72MHz frequency with the turn of 2 dials, no tuning needed.
•
Gyros - a variety of genuine Futaba gyros are available for your aircraft or helicopter needs. See p. 64 for aircraft or
p. 89 for helicopter gyro information.
•
Governor (GV1) - for helicopter use. Automatically adjusts throttle servo position to maintain a constant head speed
regardless of blade pitch, load, weather, etc. See p. 89 for details.
•
DSC Cord - allows setup and testing without transmitting. Requires DSC compatible receiver (R149DP or R309DPS)
and DSC cord. With Transmitter and Receiver off, plug cord into trainer port then, into receiver battery slot. All
programing and setup may be done in this manner without transmitting.
•
TP72FM modules - additional modules on other frequencies within the 50MHz (licensed operators only) and 72 MHz
bands may be purchased to utilize your transmitter with receivers on other frequencies. Additionally, the TK and
TJ75MHz modules may be used with the 9C. (See p.8)
•
Receivers - various models of receivers may be purchased for use in other models. (See p. 8.)
10
