Bedienungsanleitung Robbe Futaba FX-40 (Seite 14 von 105) (Englisch)

520094

Zoom out

Zoom in

Vorherige Seite

1/105

Nächste Seite

Receiver sockets

FX-40

NEW CHANNEL SEQUENCE

In order to ensure that the PCM-G3 system remains compati-

ble with small 5 / 6-channel receivers, the second aileron out-

put has been assigned to channel 5. This results in a dif

ferent

receiver channel sequence compared to the PCM 1024 sys-

tem. The larger number of channels has also made this neces-

sary.

For compatibility with the PCM 1024 system it is possible to

set the transmitter to any channel sequence you wish by cal-

ling up the “Function” menu.

NOTE:

If you change the channel sequence of the PCM-G3 system,

please ensur

e that associated functions ar

e assigned to chan-

nels 1 … 6 or 7 … 12. Don’t assign such functions to channels

6 + 7, as this could result in timing differences.

The new method of selecting the model type using graphic

images is used as the basis for selecting the mixer functions;

the software automatically generates a suggested array of

mixer functions according to your selected model type, stick

mode and channel sequence. We recommend that you keep

to these suggestions as far as possible, as this produces a

standard channel assignment which avoids potential confu-

sion.

The “Function” menu clearly displays the outputs to which

particular servos have to be connected, and the transmitter

controls which will operate them. Where two or more servos

are assigned to one function, the corresponding transmitter

controls are also configured correctly.

Within a given model type the configuration is unlikely to vary

significantly. The main difference is that models with more

control surfaces will simply make use of more channels.

This is by no means the case when you switch model types.

For example, if you change the model type from a normal tail

to a tail with two elevator servos (ailvator), the channel

sequence necessarily changes.

As you would expect, the same applies to model gliders, with

and without motor, and to flying wing models with and without

winglets.

The following section contains tables and sketches of servo

connection sequences arranged by model type. The tables

vary according to the selected stick mode; in this case Mode 2

(elevator and aileron right).

6. CONNECTING SERVOS AND RECEIVER

Connect the servos and the receiver as shown in the diagram.

Socket: B/C = Receiver battery or DSC lead.

Output

1 … 12 = 1 … 12 proportional channels for servos. As an option two of these

outputs can be expanded to eight channels each by connecting Multi-Decoders.

Outputs DG 1 + 2= 2 switched channel outputs for servos.

Monitor LED = Indicates status of Wireless Frequency Setting System (WFSS).

1 x flash = OK, channel changed

Continuous flash = Problem; channel not changed

NOTE:

If a large number of powerful analo-

gue or digital servos is connected,

the standar

d switch harness supp-

lied in the set will not be capable of

handling the heavy currents drawn.

In such cases it is necessary to use

a suitable high-current power supply

(a so-called Power battery backer)

to supply the servos and receiver.

Ask at a specialist model shop for

details.

On / Off switch

Servos 1..12

Charge socket

Receiver battery

Servos 1...12

DG 2

Monitor LEDDG 1

B/C

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Robbe Futaba FX-40 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Robbe Futaba FX-40

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info