Bedienungsanleitung Robbe Futaba FX-40 (Seite 56 von 105) (Englisch)

520094

Zoom out

Zoom in

Vorherige Seite

1/105

Nächste Seite

Model menu

Flight modes

FX-40

17.1 SELECTING FLIGHT MODES

The software of the FX-40 pr

ovides up to eight flight modes for

each individual model memory. This feature ensures that you

can always store the optimum settings for the various phases

of a typical flight, and call them up as and when required sim-

ply by operating a switch.

For example, this option can be used to program the settings

for a model glider so that the control surfaces are set correctly

for the winch launch phase, i.e. both ailerons and both flaps

lowered in order to gain maximum possible lift for the launch.

To guarantee a stable flight attitude you could also select the

option for setting an elevator offset to provide pitch trim com-

pensation (around the lateral axis). These values can be called

up prior to launching the model, using a switch or a particular

position of one transmitter control.

If you program several flight modes in a particular model

memory, it is possible to define the priority of the modes in any

way you like. Flight modes can be copied, named and rena-

med individually, and also erased individually. You can pro-

gram a delay time for each channel, so that there is a smooth

transition when you switch modes, rather than an abrupt

change.

Mark the ‘Flight modes’ option in the Model menu. The screen

display now looks like this:

The basic programming procedure consists of the following

steps:

• Adding a new flight mode

Mark the ‘New’ field, and the screen displays a list of the

seven possible additional flight modes.

Mark the new flight mode you wish to add, in our case by

activating the ‘Start’ field. In the remainder of this section

we will cover the programming of this new mode.

Mark the field for selecting the flight mode switch (currently NONE).

In this sub-menu you can define the flight mode activation

switch, and its mode of operation. The following display is

used to define the switch mode:

Note that it is possible to select a switch which operates

completely normally (Separate) or a switch with a logical

function (Logic). Selecting the logical switch type enables

you to link the trigger process using a logical function. In

this case the following functions become available:

• AND: Links switches in series

• OR: Links switches in parallel

• Ex-OR: Links and connects particular switches

Activate the Switch Select menu to define the switch.

Select the switch you wish to use; it is marked both in the

list and in the schematic diagram of the transmitter.

The next step is to define the direction of switch operation

for activating and disabling this flight mode: this is done by

marking the ‘On-pos.’ field in the right column.

You can set the des-

ired switch mode

individually by tou-

ching the various

switch positions.

• Copying flight modes

Mark the ‘Copy’ field. This brings up the menu for copying

individual flight modes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Robbe Futaba FX-40 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Robbe Futaba FX-40

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info