Mounting of the crown guard (fig. 9)
The crown guard delivered with the machine is suited for the use of sawblades upto
300 mm of diameter.
The guard can be put on-and off the riving knife without the aid of any tool.
Never operate the machine without this safety guard!
fig.9
Parallel saw fence (fig.10)
The saw fence is mounted onto the support rail and can be secured anywhere along the scale
bar-guiding rail using the locking knob. The fence itself can be set in two positions : high
position for normal cuts with the saw blade at 90°, and low position for cuts with the saw
blade at 45°. The fence can also be slid backwards and forwards and should be positioned in
such a way that the end of the fence corresponds plus or less with the back side of the riving
knife.
Warning: for narrow cuts along the saw fence always use a push stick!
fig.10
Fence locking knob
Locking handle
Fence locking handle
