625559
34
Zoom out
Zoom in
Vorherige Seite
1/46
Nächste Seite
NX SERIES V0913 33
English
Fig.21
Working with the optional ring guard fence (g. 22)
Attention: The use of a ring guard fence, for tools with a max. diameter of 150 mm, is optional.
Description: Ring guard fence with diameter 30 mm.
Fig.22
1 Body ring guard fence
2 Guiding template
3 Wood guide
4 Wood pusher protection
5 Adjustment knob
6 Fastener
7 Dust outlet
8 Locking knob
Assembly
The ring guard fence is xed in the 2 holes in the spindle table. Make sure the positioning pin is xed
tightly in the borehole of the table.
Adjustments
Adjust the guiding templates (2) in height in relation to the position of the tool and thickness of the
work piece. Fix with the Allen key.
Adjust the wood pusher (4) protection in height in relation to the thickness of the wood (a slight
pressure of the pusher on the wood is needed) Fix with Allen key.
Horizontally: for maximum protection and in relation to the tool diameter; x with the two screws.
After checking the protraction diameter of the tool, adjust the chip removal precisely by means
of the handle (5) at the back of the fence support. Turning the handle anticlockwise for bigger
reduction and lock with the handle on the support.
Function:
Normally the work piece is machined with the tool underneath the guiding template. Before starting,
check that the work piece travel will not be blocked by any handle. The wood is guided along the
1
7
3
2
4
6
1
8
34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Robland NXTZ wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Robland NXTZ

Robland NXTZ Bedienungsanleitung - Deutsch - 100 seiten

Robland NXTZ Bedienungsanleitung - Holländisch - 100 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info