Bedienungsanleitung Roblin Inspiration 520 (Seite 9 von 52) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

490267

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

or injury and would deem the manufacturers guarantee null and void.

IMPORTANT - The wires in this mains lead are coloured in accordance with the following code :

green / yellow : earth blue : neutral brown : live

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured

markings identifying the terminals in your plug, proceed as follows.

- The wire which is coloured green and yellow must be connected to the terminal in the plug which is

marked with the letter E or by the earth symbol

or coloured green or green and yellow.

- The wire which is coloured blue must be connected to the terminal which is marked with the letter N

or coloured black.

- The wire which is coloured brown must be connected to the terminal which is marked with the letter

L or coloured red.

ATTENTION: Do not forget to use adequate plugs to the support brackets. Enquire after the manu-

facturers. Do an embedding if necessary. The manufacturer accepts no responsibility in case of a

faulty hanging due to the drilling and the setting up of plugs in the ceiling.

It is necessary to provide an adequate thermal isolation in case the blower is placed in particularly

cold rooms.

• The Hood can be tted onto the lower surface of the wall furniture. (650 mm min. from the surface of the

cooking appliance to the underside of the cooker hood.)

• To carry out a cutting (embedding) on the lower surface of the wall furniture, as indicated.

• To drill the outlet onto the top or the back of the wall furniture.

• To x the 2 squares using the provided screws.

• To place the anti-backowats item 9 over the round outlet. To secure the connections with appropriate

clamping rings or adhesive tape.

• To place the hood into the embedding and t it on the 2 squares using the 4 screws supplied.

• DUCTING

The hood is more effective when used in the extraction mode (ducted to the outside). When the cooker

hood is ducted to the outside, charcoal lters are not required.

The ducting used must be 150 mm (6 INS), rigid circular pipe and must be manufactured from re retard-

ant material, produced to BS.476 or DIN 4102-B1. Wherever possible utilise rigid circular pipe which has

a smooth interior, rather than the expanding concertina type ducting.

Maximum length of ducting run:

- 4 metres with 1 x 90° bend.

- 3 metres with 2 x 90° bends.

- 2 metres with 3 x 90° bends.

The above assumes our 150 mm (6 INS) ducting is being installed. Please note ducting components and

ducting kits are optional accessories and have to be ordered, they are not automatically supplied with the

chimney hood.

- In the extraction mode:

• To connect the round outlet of the hood via a rigid or exible duct of ø 150 mm.

• To secure the connections with appropriate clamping rings or adhesive tape not provided.

• To remove the possible charcoal lte.

- In the recirculation mode: The ltered air is evacuated in kitchen through an outlet placed on the top of

furniture or the hood.

• To drill a hole of ø 155 mm on the top of furniture.

• To connect the round outlet of the hood via a rigid or exible duct of ø 150 mm to the outlet on the top of

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roblin Inspiration 520 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info