Bedienungsanleitung Roblin Odalia (Seite 10 von 60) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

490301

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

extension pieces laterally item G in the spigot. Make sure that the outlet of the extension pieces

item G is horizontally and vertically aligned with the chimney outlets.

b. Connect the ducting 150mm (6 INS) not provided between motors item 6 and the recirculation spigot

and secure the connections with appropriate clamping rings or adhesive tape.

c. Remove the grease lters (see paragraph Maintenance) being sure that the connector of the feeding

cable is correctly inserted in the socket placed on the side of the fan. Before tting the chimney to

the canopy make the electrical connection as described in the section titled ELECTRICAL. When

the electrical connection has been made, test the lights and the fan motor.

d. Remove the metal grease lters and insert the charcoal lter into the base of the motor housing and

secure the lter with two metal securing straps item A as illustrated in Fig. 8.

e. Upper chimney stack

To urge the higher edge of the two sides of the upper chimney stack in the slits of the bracket (Point 17).

Slightly widen the two sides of the upper chimney stack (Fig.5 - Item 7a) and hook them behind the

brackets item 2 making sure that they are well seated.

f. Lower chimney stack

Slightly widen the two sides of the chimney stack (Fig. 7 - Item 7b) and hook them between the upper

chimey stack and the wall, making sure that they are well seated.

4 OPERATION

A - EXTRACTION OR RECYCLING :Your cooker hood is supplied in the extraction mode. To use the cooker

hood in the recycling mode re-programme the hood as follows:

Starting in the recycling mode (the contaminated air passes into the hood through the grease lters and

the purifying activated charcoal lter and back out into the kitchen through grilles).

Press the ‘+’ button (while the motor and lights are switched ‘OFF’) until the ve LED lights will ash twice

to indicate conrmation that the cooker hood is in the recycling mode.

Reverting to the extraction mode (The cooker hood is ducted to the outside).

Press the ‘+’ button (while the motor and lights are switched ‘OFF’) until the ve LED lights will ash once

to indicate conrmation that the cooker hood is in the extraction mode.

B - BASIC INSTRUCTIONS

Lighting

Press LED button 1 to switch ‘ON’ the lights and the LED will illuminate to conrm the lights are switched

‘ON’.

Motor

Press LED button 2 to switch ‘ON’ the fan motor (and adjust the speed of the fan motor by pressing the

LED button ‘+’ and ‘-‘) and the LED lights 2, 3 and 4 will illuminate. The fan speed will be increased if

constant pressure is kept on the (+) button.

LED 2 : Minimum speed - cooking with one pan or simmering

LED 2 & 3 : Medium speed - normal cooking with up to 4 pans

LED 2, 3 & 4 : Maximum speed - frying and cooking foods with strong odours

Press LED button 5 to obtain the boost position for maximum effect and the LED will illuminate to conrm

fan is switched ‘ON’.

C - COMPLEMENTARY INSTRUCTIONS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roblin Odalia Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info